Date: Fri, 11 Jan 2002 23:01:42 -0500 From: leegold <leegold@operamail.com> To: freebsd-questions@freebsd.org Subject: what does my dmesg say? Message-ID: <3C3FC400@operamail.com>
next in thread | raw e-mail | index | archive | help
Below is a copy of my dmesg.
It's from an ibm aptiva that I
pulled all the stock cards out of and put
an isa hardware modem into.
First could you comment on the modem, is
it detected? I think I see something going on
sio (?)
Could you comment/interpet it in general?
Any problem areas?
The machine seems to run smoothly w/the freebsd 4.4
I have on it. Thanks.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P54C (199.43-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x52c Stepping = 12
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 50331648 (49152K bytes)
avail memory = 44437504 (43396K bytes)
Preloaded elf kernel "kernel" at 0xc0480000.
Intel Pentium detected, installing workaround for F00F bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port 0xfe80-0xfe8f at device 8.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <ATI Mach64-GT graphics accelerator> at 19.0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 4120MB <Maxtor 84320D4> [8930/15/63] at ata0-master WDMA2
acd0: CDROM <CRD-8400B> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
.............snip...
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C3FC400>