Date: Sun, 15 Sep 2002 21:18:20 +0000 From: Kyle Butt <kylebutt@myrealbox.com> To: freebsd-questions@freebsd.org Subject: Enhanced cd's Message-ID: <20020915211820.GA25332@TriGem350.mindspring.com>
next in thread | raw e-mail | index | archive | help
Does anyone know how to mount the data partition on a cd-extra type cd? I've grokked through the sources of the cd9660 mount system and the manpages but I found no answers. mount -tcd9660 -o-s0 /dev/acd0t14 /mnt succeeds, but nothing exists on /mnt. Just FYI the cd I'm testing with is Bedlam Ballroom By the Squirrel Nut Zippers I know it's mounting something. If I put a file in /mnt it disappears when I mount and reappears when I dismount Thanks in advance. Please cc replies to me. uname -a output FreeBSD TriGem350.mindspring.com 5.0-CURRENT FreeBSD 5.0-CURRENT #0: Sat Sep 7 20:39:14 GMT 2002 kyle@TriGem350:/usr/src/sys/i386/compile/TRIGEM350 i386 dmesg output: (with irrelevant lock stuff removed) Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Sat Sep 7 20:39:14 GMT 2002 kyle@TriGem350:/usr/src/sys/i386/compile/TRIGEM350 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0504000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc05040a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 350796834 Hz CPU: AMD-K6(tm) 3D processor (350.80-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x58c Stepping = 12 Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX> AMD Features=0xffffffff80000800<SYSCALL,3DNow!> real memory = 134201344 (131056K bytes) avail memory = 124710912 (121788K bytes) K6-family MTRR support enabled (2 registers) VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc0436302 (1000022) VESA: ATI MACH64 netsmb_dev: loaded Using $PIR table, 5 entries at 0xc00f0b40 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P5A-B > on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0xec08-0xec0b on acpi0 acpi_cpu0: <CPU> on acpi0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib1 agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib2: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <display, VGA> at device 0.0 (no driver attached) pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 pcm0: <AudioPCI ES1370> port 0xb800-0xb83f irq 9 at device 9.0 on pci0 pci0: <simple comms> at device 10.0 (no driver attached) rl0: <RealTek 8139 10/100BaseTX> port 0xa800-0xa8ff mem 0xde000000-0xde0000ff irq 10 at device 11.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:4f:4e:03:38:9c miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atapci0: <AcerLabs Aladdin ATA33 controller> port 0xa400-0xa40f at device 15.0 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default IPsec: Initialized Security Association Processing. IP Filter: v3.4.28 initialized. Default = block all, Logging = enabled ad0: 5495MB <Maxtor 90576D4> [11166/16/63] at ata0-master UDMA33 ad1: 9765MB <Maxtor 91024D4> [19841/16/63] at ata0-slave UDMA33 ad2: 1916MB <Maxtor 72004 A> [3893/16/63] at ata1-slave WDMA2 acd0: CD-RW <CW078D ATAPI CD-R/RW> at ata1-master PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <CyberDrv CW078D CD-R/RW 110E> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020915211820.GA25332>