From owner-freebsd-isp Fri Dec 29 06:44:10 1995 Return-Path: owner-isp Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id GAA22591 for isp-outgoing; Fri, 29 Dec 1995 06:44:10 -0800 (PST) Received: from defiant.flash.net (defiant.flash.net [206.149.24.9]) by freefall.freebsd.org (8.7.3/8.7.3) with SMTP id GAA22585 for ; Fri, 29 Dec 1995 06:44:07 -0800 (PST) Resent-From: mwilson@defiant.flash.net Received: from drwho (mwilson.flash.net [206.149.24.11]) by defiant.flash.net (8.6.11/8.6.9) with SMTP id IAA16270 for ; Fri, 29 Dec 1995 08:44:04 -0600 Resent-Message-Id: <199512291444.IAA16270@defiant.flash.net> Comments: Authenticated sender is Resent-to: freebsd-isp@freebsd.org Resent-date: Fri, 29 Dec 1995 08:48:00 +0000 Received: from drwho (mwilson.flash.net [206.149.24.11]) by defiant.flash.net (8.6.11/8.6.9) with SMTP id IAA16163 for ; Fri, 29 Dec 1995 08:37:15 -0600 Date: Fri, 29 Dec 1995 08:37:15 -0600 Message-Id: <199512291437.IAA16163@defiant.flash.net> To: mwilson@flash.net Newsgroups: comp.unix.bsd.freebsd.misc Subject: cmd/buffer full on scsi-2 drive From: mwilson@flash.net (Mike Wilson) Organization: FlashNet Communications X-Newsreader: WinVN 0.99.6 MIME-Version: 1.0 Content-Type: Text/Plain; charset=US-ASCII Sender: owner-isp@freebsd.org Precedence: bulk I am attempting to use a 4.2gig scsi-2 drive with an adaptec 1542cp (isa) controller. The FreeBSD 2.0.5 machine already has 4 1gig EIDE drives and a SCSI tape (all of which work :). When I attache the drive the controller recognizes the tape, then drive (0 and 1 SCSI ID respectively) but when FreeBSD boots (from the EIDE drive) it will 'hang' when 'waiting for SCSI devices and gives the cmd/buffer full type message. I purchased a new SCSI-2 cable thinking the cable might be bad, same result... anything else I can do to figure this out? -- ------------------------------------------------------------- Mike Wilson mwilson@flash.net System Admin.