Date: Tue, 22 Feb 2011 11:31:21 -0800 From: Maksim Yevmenkin <maksim.yevmenkin@gmail.com> To: Raoul <rmgls@free.fr> Cc: freebsd-bluetooth@freebsd.org Subject: Re: Dell 370 bluetooth minicard Message-ID: <AANLkTi=vys8-C69SuDGCgNPnyX46sXq7y3NnoB2bypn5@mail.gmail.com> In-Reply-To: <20110222081811.B4301A633A@smtp3-g21.free.fr> References: <20110222081811.B4301A633A@smtp3-g21.free.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Feb 22, 2011 at 12:18 AM, Raoul <rmgls@free.fr> wrote: > On Mon, 21 Feb 2011 17:31:10 -0800 > Maksim Yevmenkin <maksim.yevmenkin@gmail.com> wrote: > >> On Mon, Feb 21, 2011 at 2:29 PM, Raoul <rmgls@free.fr> wrote: >> > >> > On my Dell E6400 the Dell bluetooth 370 wireless minicard (a CBM2046B&?) >> >> i assume its bcm2046b :) > > Sory, a typo: BCM2046B1. > >> > if i am right, does not attach to any driver. >> > i tried several drivers and of course loaded ng_ubt. >> > but rc.bluetooth start ubt0 reply >> > ngctl: send msg: No such file or directory >> > FreeBSD current r218726. >> > It never attached, it is not a version problem. > >> is device recognized at all? i assume it presents itself as usb >> device. if its the case ugen(4) should attach to it. do you see any >> ugen(4) related messages? what does usbconfig(8) output look like? > > you are right (i forgot that, do we need a quirk? thanks! no, quirk would not help it, imo. could you please also provide device and vendor IDs? better yet, please provide output of usbconfig dump_device_desc > usbconfig -u 0 -a 2 dump_all_config_desc: > > ugen0.2: <BCM2046B1 Broadcom> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE > > Configuration index 0 > > bLength = 0x0009 > bDescriptorType = 0x0002 > wTotalLength = 0x0019 > bNumInterfaces = 0x0001 > bConfigurationValue = 0x0001 > iConfiguration = 0x0000 <no string> > bmAttributes = 0x00e0 > bMaxPower = 0x002f > > Interface 0 > bLength = 0x0009 > bDescriptorType = 0x0004 > bInterfaceNumber = 0x0000 > bAlternateSetting = 0x0000 > bNumEndpoints = 0x0001 > bInterfaceClass = 0x0009 > bInterfaceSubClass = 0x0000 hmm.... interesting... bInterfaceClass is 0x9, i.e. hub. that explains why ng_ubt(4) is not attaching to the device > bInterfaceProtocol = 0x0000 > iInterface = 0x0000 <no string> > > Endpoint 0 > bLength = 0x0007 > bDescriptorType = 0x0005 > bEndpointAddress = 0x0081 <IN> > bmAttributes = 0x0003 <INTERRUPT> > wMaxPacketSize = 0x0001 > bInterval = 0x00ff > bRefresh = 0x0000 > bSynchAddress = 0x0000 > >> lets start and see if card is recognized at all, i.e. ugen(4) should >> be attaching to all usb devices by default. so, we know device is recognized (well at least somewhat). is there a physical button to turn radio on/off? did you try to press this button? thanks, max
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTi=vys8-C69SuDGCgNPnyX46sXq7y3NnoB2bypn5>