From owner-freebsd-hardware Thu Apr 6 15:13:59 1995 Return-Path: hardware-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.10/8.6.6) id PAA10286 for hardware-outgoing; Thu, 6 Apr 1995 15:13:59 -0700 Received: from condor.sys.swt.edu (condor.sys.swt.edu [147.26.32.13]) by freefall.cdrom.com (8.6.10/8.6.6) with SMTP id PAA10276 for ; Thu, 6 Apr 1995 15:13:57 -0700 Received: by condor.sys.swt.edu; (5.65/1.1.8.2/10Dec94-0221PM) id AA24407; Thu, 6 Apr 1995 17:15:28 -0500 Date: Thu, 6 Apr 1995 17:15:28 -0500 (CDT) From: "Thomas S. Traylor" To: freebsd-hardware@FreeBSD.org Subject: Conner CTMS 3200 SCSI Tape Drive Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: hardware-owner@FreeBSD.org Precedence: bulk Hi I would like to know if the Conner CTMS 3200 is a supported SCSI tape drive? Is anyone out there using one? This tape drive uses QIC-3080 tape cartridge. Here is my kernel and hardware info. The kernel is current as of the last SNAP release. /kernel: FreeBSD 2.1.0-Development #1: Tue Apr 4 23:24:53 1995 /kernel: root@vulture.sys.swt.edu:/usr/src/sys/compile/VULTURE /kernel: CPU: Pentium (Pentium-class CPU) 60 MHz Origin = "GenuineIntel" Id = 0x513 /kernel: This is a Pentium 510\60 or 567\66 Stepping=3 Features=0x1bf FPU VME PSE MCE CX8 /kernel: real memory = 16384000 (4000 pages) /kernel: avail memory = 14958592 (3652 pages) /kernel: Probing for devices on the ISA bus: [...] /kernel: aha0 is a 154xCF-2.01-VC.0: enabling mailbox and residuals /kernel: aha0: reading board settings, dma=6 int=11 100nSEC ok, using 150 nSEC /kernel: aha0 at 0x330-0x333 irq 11 drq 6 on isa /kernel: (aha0:0:0): "QUANTUM PD700S 3110" is a type 0 fixed SCSI 2 /kernel: sd0(aha0:0:0): Direct-Access 668MB (1368432 512 byte sectors) /kernel: (aha0:1:0): "QUANTUM PD700S 3110" is a type 0 fixed SCSI 2 /kernel: sd1(aha0:1:0): Direct-Access 668MB (1368432 512 byte sectors) /kernel: (aha0:2:0): "NEC CD-ROM DRIVE:501 2.2" is a type 5 removable SCSI 2 /kernel: cd0(aha0:2:0): CD-ROM cd present.[280583 x 2048 byte records] /kernel: (aha0:3:0): "CONNER CTMS 3200 7.00" is a type 1 removable SCSI 2 /kernel: st0(aha0:3:0): Sequential-Access density code 0x0, drive empty [...] Dump doesn't have a problem writing to the tape but restore is unable to read the tape. (see below) vulture# dump 0f /dev/rst0 / DUMP: Date of this level 0 dump: Thu Apr 6 16:01:46 1995 DUMP: Date of last level 0 dump: the epoch DUMP: Dumping /dev/rsd0a (/) to /dev/rst0 DUMP: mapping (Pass I) [regular files] DUMP: mapping (Pass II) [directories] DUMP: estimated 13001 tape blocks on 0.33 tape(s). DUMP: dumping (Pass III) [directories] DUMP: dumping (Pass IV) [regular files] DUMP: DUMP: 13003 tape blocks on 1 volumes(s) DUMP: Closing /dev/rst0 DUMP: DUMP IS DONE vulture# restore if /dev/rst0 tape read error: Input/output error vulture# This is what is written to /var/log/messages: /kernel: st0(aha0:3:0): NO SENSE info:5800 Here's what happens when I use tar to write to the tape. vulture# tar zcf /dev/rst0 / tar (child): can't write to /dev/rst0 : Input/output error Broken pipe vulture# This is what is written to /var/log/messages: /kernel: st0(aha0:3:0): MEDIUM ERROR info:27000 asc:50,0Write append error /kernel: st0(aha0:3:0): MEDIUM ERROR asc:50,0Write append error Any ideas or suggestions? (within reason :) ) Thanks, Tom ----------------------------------------------------------------------- Thomas S. Traylor Southwest Texas State University tst@swt.edu Computing Services MCS 263 601 University Drive (512) 245-2595 San Marcos, Texas 78666-4616 -----------------------------------------------------------------------