Date: Sat, 24 Apr 1999 21:40:02 -0700 (PDT) From: Christian Weisgerber <naddy@mips.rhein-neckar.de> To: freebsd-ports@FreeBSD.org Subject: Re: ports/10233: misc/buffer has been removed, let's revive it! Message-ID: <199904250440.VAA20749@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR ports/10233; it has been noted by GNATS.
From: Christian Weisgerber <naddy@mips.rhein-neckar.de>
To: freebsd-gnats-submit@freebsd.org
Cc: jonny@jonny.eng.br
Subject: Re: ports/10233: misc/buffer has been removed, let's revive it!
Date: Sun, 25 Apr 1999 04:52:17 +0200
Here's the unified port of "buffer".
This should close PRs #10233 and #10549.
----------------
# This is a shell archive. Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file". Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
# buffer
# buffer/files
# buffer/files/md5
# buffer/patches
# buffer/patches/patch-aa
# buffer/patches/patch-ab
# buffer/patches/patch-ac
# buffer/pkg
# buffer/pkg/COMMENT
# buffer/pkg/DESCR
# buffer/pkg/PLIST
# buffer/Makefile
#
echo c - buffer
mkdir -p buffer > /dev/null 2>&1
echo c - buffer/files
mkdir -p buffer/files > /dev/null 2>&1
echo x - buffer/files/md5
sed 's/^X//' >buffer/files/md5 << 'END-of-buffer/files/md5'
XMD5 (buffer-1.17.tar.gz) = 6c5236ed99f4df0832623f4c0498c681
END-of-buffer/files/md5
echo c - buffer/patches
mkdir -p buffer/patches > /dev/null 2>&1
echo x - buffer/patches/patch-aa
sed 's/^X//' >buffer/patches/patch-aa << 'END-of-buffer/patches/patch-aa'
X--- Makefile.orig Wed Jul 14 17:59:17 1993
X+++ Makefile Thu Mar 11 23:01:56 1999
X@@ -4,13 +4,13 @@
X # You should also add -DSYS5 for Ultrix, AIX, and Solarix.
X # Add -DDEF_SHMEM=n if you can only have n bytes of shared memory
X # (eg: -DDEF_SHMEM=524288 if you can only have half a meg.)
X-CFLAGS=
X+CFLAGS+=
X
X # Where to install buffer and its manual pages
X-INSTBIN=/usr/local/bin
X-INSTMAN=/usr/man/manl
X+INSTBIN=${PREFIX}/bin
X+INSTMAN=${PREFIX}/man/man1
X # The manual page section (normally l or 1)
X-S=l
X+S=1
X
X RM=/bin/rm
X ALL=README buffer.man Makefile buffer.c sem.c COPYING
X@@ -18,18 +18,14 @@
X all: buffer
X
X buffer: buffer.o sem.o
X- $(CC) -o buffer $(CFLAGS) buffer.o sem.o
X+ $(CC) -o buffer buffer.o sem.o
X
X clean:
X $(RM) -f *.o core buffer .merrs
X
X install: buffer
X- rm -f $(INSTBIN)/buffer
X- cp buffer $(INSTBIN)/buffer
X- chmod 111 $(INSTBIN)/buffer
X- rm -f $(INSTMAN)/buffer.$S
X- cp buffer.man $(INSTMAN)/buffer.$S
X- chmod 444 $(INSTMAN)/buffer.$S
X+ ${BSD_INSTALL_PROGRAM} buffer $(INSTBIN)/buffer
X+ ${BSD_INSTALL_MAN} buffer.man $(INSTMAN)/buffer.$S
X
X buffer.tar: $(ALL)
X $(RM) -f buffer.tar
END-of-buffer/patches/patch-aa
echo x - buffer/patches/patch-ab
sed 's/^X//' >buffer/patches/patch-ab << 'END-of-buffer/patches/patch-ab'
X--- buffer.c.orig Wed Jul 14 17:59:17 1993
X+++ buffer.c Thu Mar 11 02:55:42 1999
X@@ -384,6 +384,7 @@
X }
X
X /* The interrupt handler */
X+void
X shutdown()
X {
X static int shutting;
X@@ -400,6 +401,7 @@
X }
X
X /* Shutdown because the child has ended */
X+void
X child_shutdown()
X {
X /* Find out which child has died. (They may not be my
END-of-buffer/patches/patch-ab
echo x - buffer/patches/patch-ac
sed 's/^X//' >buffer/patches/patch-ac << 'END-of-buffer/patches/patch-ac'
X--- buffer.man.orig Wed Jul 14 17:59:16 1993
X+++ buffer.man Thu Mar 11 03:36:46 1999
X@@ -37,7 +37,7 @@
X Use the given file as the output file. The default is stdout.
X .TP
X .B \-S size
X-After every chunk this size has been writen print out how much been writen so far.
X+After every chunk this size has been written, print out how much been written so far.
X By default this is not set.
X .TP
X .B \-s size
X@@ -71,9 +71,9 @@
X throughput on some drives.)
X .TP
X .B \-B
X-Force each block writen to be padded out to the blocksize. This is needed by some tape
X+Force each block written to be padded out to the blocksize. This is needed by some tape
X and cartridge drives. Defaults to unpadded. This only affects the
X-last block writen.
X+last block written.
X .TP
X .B \-t
X On exiting print to stderr a brief message showing the total number of
X@@ -82,7 +82,7 @@
X .B \-Z
X If reading/writing directly to a character device (like a tape drive)
X then after each gigabyte perform an lseek to the start of the file.
X-Use this flag with extreme care. If can only be used on devices where
X+Use this flag with extreme care. It can only be used on devices where
X an lseek does not rewind the tape but does reset the kernels position
X flags. It is used to allow more than 2 gigabytes to be written.
X .PP
END-of-buffer/patches/patch-ac
echo c - buffer/pkg
mkdir -p buffer/pkg > /dev/null 2>&1
echo x - buffer/pkg/COMMENT
sed 's/^X//' >buffer/pkg/COMMENT << 'END-of-buffer/pkg/COMMENT'
XBuffer sporadic I/O for faster tape and pipe throughput.
END-of-buffer/pkg/COMMENT
echo x - buffer/pkg/DESCR
sed 's/^X//' >buffer/pkg/DESCR << 'END-of-buffer/pkg/DESCR'
XThis is a program designed initially to speed up writing tapes on remote
Xtape drives, but may be used as a general pipe buffering utility.
X
XNote: You *must* have a kernel with
X options SYSVSHM
Xcompiled in.
X
XThe program splits itself into two processes. The first process reads
X(and reblocks) from stdin into a shared memory buffer. The second
Xwrites from the shared memory buffer to stdout. Doing it this way
Xmeans that the writing side effectly sits in a tight write loop and
Xdoesn't have to wait for input. Similarly for the input side. It is
Xthis waiting that slows down other reblocking processes, like dd.
END-of-buffer/pkg/DESCR
echo x - buffer/pkg/PLIST
sed 's/^X//' >buffer/pkg/PLIST << 'END-of-buffer/pkg/PLIST'
Xbin/buffer
END-of-buffer/pkg/PLIST
echo x - buffer/Makefile
sed 's/^X//' >buffer/Makefile << 'END-of-buffer/Makefile'
X# New ports collection makefile for: buffer
X# Version required: 1.17
X# Date created: 17 Nov 1995
X# Whom: markm
X#
X# $Id$
X#
X
XDISTNAME= buffer-1.17
XCATEGORIES= misc
XMASTER_SITES= ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/ \
X ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/
X
XMAINTAINER= naddy@mips.rhein-neckar.de
X
XNO_WRKSUBDIR= yes
XMAN1= buffer.1
X
X.include <bsd.port.mk>
END-of-buffer/Makefile
exit
--
Christian "naddy" Weisgerber naddy@mips.rhein-neckar.de
carpe librum: books 'n' reviews <URL:http://www.carpe.com/buch/>;
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199904250440.VAA20749>