Date: Thu, 05 Jul 2012 11:00:45 +0300 From: Alexandr <shuriku@shurik.kiev.ua> To: Kevin Oberman <kob6558@gmail.com> Cc: freebsd-mobile@freebsd.org Subject: Re: looking for opinions on laptop Message-ID: <4FF549AD.70202@shurik.kiev.ua> In-Reply-To: <CAN6yY1s-PFoJUgL8Mg3PWTt-DFy1UvnK9AoyA3XxPpaB7OkTfA@mail.gmail.com> References: <20461.39520.53750.83802@jerusalem.litteratus.org> <201207032202.58778.erich@alogreentechnologies.com> <20467.3769.866463.886400@jerusalem.litteratus.org> <201207032228.47210.erichfreebsdlist@ovitrap.com> <4FF47C05.9020709@shurik.kiev.ua> <CAN6yY1s-PFoJUgL8Mg3PWTt-DFy1UvnK9AoyA3XxPpaB7OkTfA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] 05.07.2012 07:45, Kevin Oberman пишет: > On Wed, Jul 4, 2012 at 10:23 AM, Alexandr <shuriku@shurik.kiev.ua> wrote: >> I'm using Lenovo B570 (Core i5-2410M) with 10-CURRENT and with 9-STABLE >> after KMS patches were committed. >> >> Works perfect: >> 1. Intel GMA with latest i915kms and dri2. Nvidia Optimus mode disabled >> in BIOS. >> 2. Network with re(4) >> 3. Wireless NIC (broadcom) was replaced with new Intel 6025 bought from >> e-bay for 20$ >> 4. Bluetooth >> >> Doesn't work: >> 1. Fn-keys >> 2. Screen backlight control >> 3. Suspend/Resume >> 4. Doesn't boot from GPT-disk, only from MBR (bios related issue) > I have a very similar T520. Same as above, but two spindles (which I > still like) except: > Wired network card is Intel 82579LM supported in head, 9, and 8.3 > > Wireless can be selected to use the Intel card at no extra cost, but > default is a RealTek that is not supported > > SOME Fn keys work and others may be redefined to work. Brightness in > particular does not work and I have not been able to get it to work. > ThinkLight does work. > > Backlight can be adjusted with the SET by command using the acpi_call > port. This includes trurnig off and on. > > Mine boots fine from GPT disk. (My FreeBSD boots from the GPT disk.) I > am really surprised the X220 fails on them. > > Sound works, but you need to change a couple of pins to get the audio > jack working. Add the following to /boot/loader.conf: > # Load the sound driver > snd_hda_load="YES" > # and setup headphones > # Out : speaker + headphones > hint.hdac.0.cad0.nid25.config="as=1 seq=15" > # In : mic + external mic > hint.hdac.0.cad0.nid35.config="as=2" > hint.hdac.0.cad0.nid27.config="as=2 seq=15" > > I have not tried to use the HDMI, so I have no idea about it. HDMI and sound works fine [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iQEcBAEBAgAGBQJP9UmtAAoJENymDnon3wetK9YH/A++LLkzzfM6jBwfve0KuT1Y eWJm7RuTcKp3YuBcTDa8p1nLoJoiHkjeNVxEK/uTe2oOdT8hrFm6gHKWcXVLJ2KG uRFdtCj+nZqHswXxwmdj41Kh0jDbhn38awOMMb+h1WcAef5UPDYceP6hDIUonFPO G2W1tiQA7BCXJxCRFHIzFxy8yDGdLwY0eu+aXy8V0XvNa3Iz9KkYcP9Lf089OVoi tZ946OR5WoRuoJdeRd/bqJQH4hGaKqbcK8Mr3WUy13qkcIsLZobgW9w64eFHVBlC ZU1CFp/T+l40sS6t910KJfozWMlB5RqkMR1mSQtuvZUSRysfSA7w5OJgJOk9WR0= =FaLH -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4FF549AD.70202>