Date: Sat, 22 Mar 1997 08:31:16 -0500 From: Ron Bolin <rlb@mindspring.com> To: freebsd-current@freebsd.org Subject: AHC SCSI and XMCD Halt System Message-ID: <3333DF24.41C67EA6@mindspring.com>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------446B9B3D2781E494167EB0E7 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit FYI, When using 2.2REL ENG cvsup 3-20-97. System: Adaptech 2940UW and Fujitsu 2954QAU with a Toshiba 3701B SCSI-II CDROM. When I use Xmcd 2.1 the system reboots (every time), it didn't do this b4 3-3-97. See attached dmesg.txt file. Ron -- **************************************************************************** Ron Bolin rlb@mindspring.com, http://www.mindspring.com/~rlb/ GSU: gs01rlb@panther.gsu.edu matrlbx@indigo4.cs.gsu.edu Home: 770-992-8877 **************************************************************************** --------------446B9B3D2781E494167EB0E7 Content-Type: text/plain; charset=us-ascii; name="dmesg.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.txt" Copyright (c) 1992-1996 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 2.2-RELEASE #0: Fri Mar 21 09:50:02 EST 1997 rlb@rlb.users.mindspring.com:/usr/src/sys/compile/dogsnarf Calibrating clock(s) ... i586 clock: 199447994 Hz, i8254 clock: 1193280 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CLK_USE_I586_CALIBRATION not specified - using old calibration method CPU: Pentium Pro (199.43-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x617 Stepping=7 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,<b11>,MTRR,PGE,MCA,CMOV> real memory = 134217728 (131072K bytes) avail memory = 129028096 (126004K bytes) pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000005c pcibus_setup(1a): mode1res=0x80000000 (0x80000000) pcibus_check: device 0 is there (id=12378086) Probing for devices on PCI bus 0: configuration mode 1 allows 32 devices. chip0 <Intel 82440FX (Natoma) PCI and memory controller> rev 2 on pci0:0 chip1 <Intel 82371SB PCI-ISA bridge> rev 1 on pci0:7:0 chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1 mapreg[20] type=1 addr=0000ffa0 size=0010. I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks Extended BIOS: disabled Lower BIOS: disabled Coprocessor IRQ13: disabled Mouse IRQ12: disabled Interrupt Routing: A: , B: , C: , D: MB0: , MB1: pci0:7:2: Intel Corporation, device=0x7020, class=0x0c, subclass=0x03 int d irq ?? [no driver assigned] vga0 <VGA-compatible display device> rev 1 on pci0:19 mapreg[10] type=0 addr=fe000000 size=800000. ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 11 on pci0:20 mapreg[10] type=1 addr=0000ec00 size=0100. mapreg[14] type=0 addr=febef000 size=1000. reg16: ioaddr=0xec00 size=0x100 ahc0: Reading SEEPROM...done. internal50 cable is present internal68 cable is present brdctl == 0x2c external cable not present eprom is present brdctl == 0xec low byte termination disabled, high byte termination enabled ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0: Resetting Channel A ahc0: Downloading Sequencer Program...ahc0: 387 instructions downloaded Done ahc0: Probing channel A ahc0 waiting for scsi devices to settle ahc0: target 0 synchronous at 10.0MHz, offset = 0xf (ahc0:0:0): "SEAGATE ST12550N 0013" type 0 fixed SCSI 2 sd0(ahc0:0:0): Direct-Access 2040MB (4178874 512 byte sectors) sd0(ahc0:0:0): with 2708 cyls, 19 heads, and an average 81 sectors/track ahc0: target 1 using 16Bit transfers ahc0: target 1 synchronous at 10.0MHz, offset = 0x8 (ahc0:1:0): "FUJITSU M2934Q-512 0110" type 0 fixed SCSI 2 sd1(ahc0:1:0): Direct-Access 4153MB (8506782 512 byte sectors) sd1(ahc0:1:0): with 3421 cyls, 18 heads, and an average 138 sectors/track ahc0: target 2 synchronous at 5.0MHz, offset = 0x8 (ahc0:2:0): "SONY SDT-5000 3.30" type 1 removable SCSI 2 st0(ahc0:2:0): Sequential-Access density code 0x13, drive empty ahc0: target 3 synchronous at 10.0MHz, offset = 0x8 (ahc0:3:0): "TOSHIBA CD-ROM XM-5701TA 3136" type 5 removable SCSI 2 cd0(ahc0:3:0): CD-ROM cd present [206115 x 2048 byte records] ahc0:A:4: refuses synchronous negotiation. Using asynchronous transfers (ahc0:4:0): "ARCHIVE VIPER 2525 25462 -007" type 1 removable SCSI 1 st1(ahc0:4:0): Sequential-Access density code 0x0, drive empty pci0: uses 8392704 bytes of memory from fe000000 upto febeffff. pci0: uses 272 bytes of I/O space from ec00 upto ffaf. Probing for devices on the ISA bus: sc0: the current keyboard controller command byte 0065 kbdio: RESET_KBD return code:00fa kbdio: RESET_KBD status:00aa sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x300 ed1 not found at 0x280 sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2: disabled, not probed. sio3: disabled, not probed. lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface bpf: lp0 attached lpt1 not found at 0xffffffff mse0: wrong signature ff mse0 not found at 0x23c psm0: current command byte:0065 kbdio: TEST_AUX_PORT status:0000 kbdio: RESET_AUX return code:00fa kbdio: RESET_AUX status:00aa kbdio: RESET_AUX ID:0000 psm0: status after reset 00 02 64 psm: status b1 03 c8 (get_mouse_buttons) psm0: status 00 02 64 psm0 at 0x60-0x64 irq 12 on motherboard psm0: device ID 0, 3 buttons fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in aic0 not found at 0x340 wt0 not found at 0x300 1 3C5x9 board(s) on ISA found at 0x300 ep0 at 0x300-0x30f irq 10 on isa ep0: aui/utp/bnc[*BNC*] address 00:60:97:13:cf:82 bpf: ep0 attached npx0 on motherboard npx0: INT 16 interface imasks: bio c0000840, tty c003149a, net c003149a BIOS Geometries: 0:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors 1:03fe3f20 0..1022=1023 cylinders, 0..63=64 heads, 1..32=32 sectors 0 accounted for Device configuration finished. Considering FFS root f/s. changing root device to sd1a configure() finished. bpf: tun0 attached bpf: sl0 attached bpf: lo0 attached bpf: ds0 attached sd1s1: type 0xa5, start 32, end = 8506047, size 8506016 : OK WARNING: / was not properly dismounted. --------------446B9B3D2781E494167EB0E7--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3333DF24.41C67EA6>