From owner-freebsd-bugs@FreeBSD.ORG Sat Jun 20 16:26:58 2015 Return-Path: Delivered-To: freebsd-bugs@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [8.8.178.115]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by hub.freebsd.org (Postfix) with ESMTPS id B8A75A for ; Sat, 20 Jun 2015 16:26:58 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from kenobi.freebsd.org (kenobi.freebsd.org [IPv6:2001:1900:2254:206a::16:76]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by mx1.freebsd.org (Postfix) with ESMTPS id A2992A90 for ; Sat, 20 Jun 2015 16:26:58 +0000 (UTC) (envelope-from bugzilla-noreply@freebsd.org) Received: from bugs.freebsd.org ([127.0.1.118]) by kenobi.freebsd.org (8.14.9/8.14.9) with ESMTP id t5KGQwuN066780 for ; Sat, 20 Jun 2015 16:26:58 GMT (envelope-from bugzilla-noreply@freebsd.org) From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 200993] camcontrol commands results in Periph destroyed on mrsas Date: Sat, 20 Jun 2015 16:26:58 +0000 X-Bugzilla-Reason: AssignedTo X-Bugzilla-Type: new X-Bugzilla-Watch-Reason: None X-Bugzilla-Product: Base System X-Bugzilla-Component: kern X-Bugzilla-Version: 10.1-STABLE X-Bugzilla-Keywords: X-Bugzilla-Severity: Affects Only Me X-Bugzilla-Who: phil@dip.host X-Bugzilla-Status: New X-Bugzilla-Priority: --- X-Bugzilla-Assigned-To: freebsd-bugs@FreeBSD.org X-Bugzilla-Target-Milestone: --- X-Bugzilla-Flags: X-Bugzilla-Changed-Fields: bug_id short_desc product version rep_platform op_sys bug_status bug_severity priority component assigned_to reporter Message-ID: Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable X-Bugzilla-URL: https://bugs.freebsd.org/bugzilla/ Auto-Submitted: auto-generated MIME-Version: 1.0 X-BeenThere: freebsd-bugs@freebsd.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: Bug reports List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sat, 20 Jun 2015 16:26:58 -0000 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D200993 Bug ID: 200993 Summary: camcontrol commands results in Periph destroyed on mrsas Product: Base System Version: 10.1-STABLE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: phil@dip.host FreeBSD 10.1 amd64 on Dell R530 server camcontrol identify ... smartctl -a ... detach disk with message: da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0: s/n WZ141217AS1648620 detached (da0:mrsas0:1:0:0): Periph destroyed But camcontrol rescan sometimes return disk # smartctl -a /dev/da0 # camcontrol rescan 1:0:0 # camcontrol identify /dev/da0 # MegaCli -FwTermLog -Dsply -a0 =EF=BF=BD06/20/15 12:29:19: C0:EVT#02773-06/20/15 12:29:19: 113=3DUnexpecte= d sense: PD 00(e0x20/s0) Path 4433221104000000, CDB: 00 00 00 00 00 00, Sense: 1/00/1d =EF=BF=BD06/20/15 12:32:56: C0:SysDma: localAddrPlb 50e0241070, localAddr e= 0241070 00 00 1d 00 00 00 00 06/20/15 16:07:36: C0:EVT#02781-06/20/15 16:07:36: 113=3DUnexpected sense: = PD 07(e0x20/s7) Path 4433221103000000, CDB: 1b 00 00 00 02 00, Sense: 5/24/00 # uname -a FreeBSD ********** 10.1-RELEASE-p10 FreeBSD 10.1-RELEASE-p10 #0: Wed May 13 06:54:13 UTC 2015=20=20=20=20 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 # sysctl -a | grep mrsas device mrsas da0 at mrsas0 bus 1 scbus1 target 0 lun 0 (da0:mrsas0:1:0:0): Periph destroyed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0 at mrsas0 bus 1 scbus1 target 0 lun 0 (da0:mrsas0:1:0:0): Periph destroyed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da0 at mrsas0 bus 1 scbus1 target 0 lun 0 (da0:mrsas0:1:0:0): Periph destroyed da0 at mrsas0 bus 1 scbus1 target 0 lun 0 da7 at mrsas0 bus 1 scbus1 target 7 lun 0 hw.mfi.mrsas_enable: 1 dev.mrsas.%parent:=20 dev.mrsas.0.%desc: LSI Invader SAS Controller dev.mrsas.0.%driver: mrsas dev.mrsas.0.%location: slot=3D0 function=3D0 dev.mrsas.0.%pnpinfo: vendor=3D0x1000 device=3D0x005d subvendor=3D0x1028 subdevice=3D0x1f49 class=3D0x010400 dev.mrsas.0.%parent: pci1 dev.mrsas.0.disable_ocr: 0 dev.mrsas.0.driver_version: 06.704.01.01-fbsd dev.mrsas.0.reset_count: 0 dev.mrsas.0.fw_outstanding: 0 dev.mrsas.0.io_cmds_highwater: 84 dev.mrsas.0.mrsas_debug: 9 dev.mrsas.0.mrsas_io_timeout: 180000 dev.mrsas.0.mrsas_fw_fault_check_delay: 1 dev.mrsas.0.reset_in_progress: 0 # MegaCli -AdpAllInfo -aAll Adapter #0 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D Versions =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Product Name : PERC H730 Mini Serial No : 4CF01GX FW Package Build: 25.2.1.0037 Mfg. Data =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Mfg. Date : 12/18/14 Rework Date : 12/18/14 Revision No : A00 Battery FRU : N/A Image Versions in Flash: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D BIOS Version : 6.18.02.0_4.16.07.00_0x06070400 Ctrl-R Version : 5.03-0010 FW Version : 4.240.00-3615 NVDATA Version : 3.1310.00-0081 Boot Block Version : 3.02.00.00-0000 Pending Images in Flash =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D None PCI Info =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Controller Id : 0000 Vendor Id : 1000 Device Id : 005d SubVendorId : 1028 SubDeviceId : 1f49 Host Interface : PCIE ChipRevision : C0 Link Speed : 3=20 Number of Frontend Port: 0=20 Device Interface : PCIE Number of Backend Port: 8=20 Port : Address 0 4433221100000000=20 1 4433221101000000=20 2 4433221102000000=20 3 4433221103000000=20 4 4433221104000000=20 5 4433221105000000=20 6 4433221106000000=20 7 4433221107000000=20 HW Configuration =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D SAS Address : 544a84200655a100 BBU : Present Alarm : Absent NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Present ROC temperature : 33 degree Celsius Controller temperature : 33 degree Celcius Settings =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Current Time : 16:24:37 6/20, 2015 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 4 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : 128MB Cluster Mode : Disabled Alarm : Disabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 255 Ecc Bucket Leak Rate : 240 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Disabled Maintain PD Fail History : Disabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : Yes Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 0=20 Auto Enhanced Import : No Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No POST delay : 90 seconds BIOS Error Handling : Pause on Errors Current Boot Mode :Normal Capabilities =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID10, RAID= 50, RAID60, PRL 11, PRL 11 with spanning, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Status =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D ECC Bucket Count : 0 Limitations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Max Arms Per VD : 32=20 Max Spans Per VD : 8=20 Max Arrays : 128=20 Max Number of VDs : 64=20 Max Parallel Commands : 928=20 Max SGE Count : 60=20 Max Data Transfer Size : 8192 sectors=20 Max Strips PerIO : 42=20 Max LD per array : 16=20 Min Strip Size : 64 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 0 MB Device Present =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Virtual Drives : 0=20 Degraded : 0=20 Offline : 0=20 Physical Devices : 9=20 Disks : 8=20 Critical Disks : 0=20 Failed Disks : 0=20 Supported Adapter Operations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : Yes Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : Yes Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : No Support PI : Yes Support Boot Time PFK Change : No Disable Online PFK Change : No Support LDPI Type1 : No Support LDPI Type2 : Yes Support LDPI Type3 : No Support Shield State : Yes Block SSD Write Disk Cache Change: No Support Online FW Update : Yes Supported VD Operations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : Yes Support Breakmirror : Yes Power Savings : Yes Supported PD Operations =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes NCQ : No Disable Copyback : No Enable JBOD : Yes Enable Copyback on SMART : Yes Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : No Disable Spin Down of hot spares : Yes Spin Down time : 30=20 T10 Power State : Yes Error Counters =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Memory Correctable Errors : 0=20 Memory Uncorrectable Errors : 0=20 Cluster Information =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Cluster Permitted : No Cluster Active : No Default Settings =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D Phy Polarity : 0=20 Phy PolaritySplit : 0=20 Background Rate : 30=20 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : No Coercion Mode : 128MB ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : 1=20 Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : No Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 4=20 Disable Ctrl-R : No Enable Web BIOS : No Direct PD Mapping : Yes BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : No Maintain PD Fail History : No Disable Puncturing : No Zero Based Enclosure Enumeration : Yes PreBoot CLI Enabled : No LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : Yes Enable Led Header : No Delay during POST : 0=20 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : Yes Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : Yes Max LD per array : 16 Power Saving option : Don't spin down unconfigured drives Don't spin down Hot spares Don't Auto spin down Configured Drives Power settings apply to all drives - individual PD/LD power settings cannot= be set Max power savings option is not allowed for LDs. Only T10 power conditions= are to be used. Cached writes are not used for spun down VDs Can schedule disable power savings at controller level Default spin down time in minutes: 30=20 Enable JBOD : Yes TTY Log In Flash : Yes Auto Enhanced Import : No BreakMirror RAID Support : Yes Disable Join Mirror : Yes Enable Shield State : No Time taken to detect CME : 60s Exit Code: 0x00 --=20 You are receiving this mail because: You are the assignee for the bug.=