From owner-freebsd-alpha@FreeBSD.ORG Tue Aug 31 13:22:01 2004 Return-Path: Delivered-To: freebsd-alpha@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 67C4C16A4CE for ; Tue, 31 Aug 2004 13:22:01 +0000 (GMT) Received: from servww6.ww.uni-erlangen.de (servww6.ww.uni-erlangen.de [131.188.238.13]) by mx1.FreeBSD.org (Postfix) with ESMTP id 4B4B843D46 for ; Tue, 31 Aug 2004 13:22:00 +0000 (GMT) (envelope-from ardelean@ww.uni-erlangen.de) Received: from localhost (ardelean@localhost)ESMTP id i7VDLvf31878 for ; Tue, 31 Aug 2004 15:21:57 +0200 Date: Tue, 31 Aug 2004 15:21:57 +0200 (CEST) From: Gheorghe Ardelean To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Subject: FreeBSD 5.3-BETA1 boot OK on Alpha Server 2100 5/250RM X-BeenThere: freebsd-alpha@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Porting FreeBSD to the Alpha List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 31 Aug 2004 13:22:01 -0000 Hi, Today I have tested my Alpha Server at work and to my surprise the BETA1 disc was booting ok on this machine. Thank you Andrew for supporting this machine in FreeBSD (IIRC he wrote the support for this)! The graphic card is a Compaq Qvision in an EISA slot! The config and boot mesage (boot -v) follows! Regards, G. Ardelean ========== VMS PALcode V1.20-3, OSF PALcode V1.22-1 starting console on CPU 0 Testing Memory bank 0 Testing Memory bank 1 Testing Memory bank 2 Testing Memory bank 3 Configuring Memory Modules probing hose 0, PCI probing PCI-to-EISA bridge, bus 1 bus 0, slot 0 -- ewa -- DECchip 21040-AA bus 0, slot 1 -- pka -- NCR 53C810 bus 1, slot 2 -- vga -- Compaq Qvision ** keyboard error ** starting console on CPU 1 starting console on CPU 2 starting console on CPU 3 os_type: UNIX - console CIPCA driver not started Memory Testing and Configuration Status Module Size Base Addr Intlv Mode Intlv Unit Status ------ ----- --------- ---------- ---------- ------ 2 512MB 00000000 2-Way 0 Passed 3 512MB 00000000 2-Way 1 Passed Total Bad Pages 0 Testing the System Testing the Disks (read only) Testing the Network AlphaServer 2100 Console V5.3-6, built on Oct 16 1998 at 12:49:45 P00>>>show dev dka0.0.0.1.0 DKA0 RZ28 442D dka100.1.0.1.0 DKA100 RZ28 D41C dka200.2.0.1.0 DKA200 RZ28 442D dka300.3.0.1.0 DKA300 RZ28 442D dka600.6.0.1.0 DKA600 RRD43 1084 dva0.0.0.1000.0 DVA0 RX26/RX23 ewa0.0.0.0.0 EWA0 08-00-2B-E2-78-1C pka0.7.0.1.0 PKA0 SCSI Bus ID 7 P00>>>show config Digital Equipment Corporation AlphaServer 2100 5/250 SRM Console V5.3-6 VMS PALcode V1.20-3, OSF PALcode V1.22-1 Component Status Module ID CPU 0 P B2040-AA DECchip (tm) 21164-1 CPU 1 P B2040-AA DECchip (tm) 21164-1 CPU 2 P B2040-AA DECchip (tm) 21164-1 CPU 3 P B2040-AA DECchip (tm) 21164-1 Memory 2 P B2022-CA 512 MB Memory 3 P B2022-CA 512 MB I/O B2110-AA dva0.0.0.1000.0 RX26/RX23 Slot Option Hose 0, Bus 0, PCI 0 DECchip 21040-AA ewa0.0.0.0.0 08-00-2B-E2-78-1C 1 NCR 53C810 pka0.7.0.1.0 SCSI Bus ID 7 dka0.0.0.1.0 RZ28 dka100.1.0.1.0 RZ28 dka200.2.0.1.0 RZ28 dka300.3.0.1.0 RZ28 dka600.6.0.1.0 RRD43 2 Intel 82375 Bridge to Bus 1, EISA Slot Option Hose 0, Bus 1, EISA 2 Compaq Qvision P00>>> P00>>>boot dka600 (boot dka600.6.0.1.0 -flags A) block 0 of dka600.6.0.1.0 is a valid boot block reading 409 blocks from dka600.6.0.1.0 bootstrap code read in base = 200000, image_start = 0, image_bytes = 33200 initializing HWRPB at 2000 initializing page table at 3fff0000 initializing machine state setting affinity to the primary CPU jumping to bootstrap code Console: SRM firmware console VMS PAL rev: 0x4000300010114 OSF PAL rev: 0x4000100020116 Switch to OSF PAL code succeeded. FreeBSD/alpha SRM CD9660 boot, Revision 1.2 (root@ds10.wbnet, Mon Aug 23 08:53:04 UTC 2004) Memory: 1048576 k Loading /boot/defaults/loader.conf Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 9 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v Entering /boot/kernel/kernel at 0xfffffc0000347100... GDB: debug ports: sio GDB: current port: sio KDB: debugger backends: ddb gdb KDB: current backend: ddb Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004 root@ds10.wbnet:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e02000. Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e020e0. DEC AlphaServer 2100 AlphaServer 2100 5/250, 250MHz 8192 byte page size, 4 processors. CPU: EV5 (21164) major=5 minor=1 OSF PAL rev: 0x4000100020116 real memory = 1071570944 (1021 MB) Physical memory chunk(s): 0x00e24000 - 0x3f0c9fff, 1042964480 bytes (127315 pages) avail memory = 1036075008 (988 MB) smp_start_secondary: starting cpu 1 smp_start_secondary: cpu 1 started smp_start_secondary: starting cpu 2 smp_start_secondary: cpu 2 started smp_start_secondary: starting cpu 3 smp_start_secondary: cpu 3 started FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs null: random: mem: t20: using interrupt type 0 on pci bus 0 t20: pcib0: on t20 pci0: on pcib0 pci0: physical bus=0 map[10]: type 4, range 32, base 00010100, size 7, enabled map[14]: type 1, range 32, base 81000100, size 7, enabled found-> vendor=0x1011, dev=0x0002, revid=0x23 bus=0, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=2 map[10]: type 4, range 32, base 00010000, size 8, enabled map[14]: type 1, range 32, base 81000000, size 8, enabled found-> vendor=0x1000, dev=0x0001, revid=0x01 bus=0, slot=1, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=1 found-> vendor=0x8086, dev=0x0482, revid=0x03 bus=0, slot=2, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) de0: port 0x10100-0x1017f mem 0x81000100-0x8100017f irq 2 at device 0.0 on pci0 de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x81000100 de0: interrupting at T2 irq 2 (stdio irq 2) de0: [GIANT-LOCKED] de0: DEC 21040 [10Mb/s] pass 2.3 de0: bpf attached de0: Ethernet address: 08:00:2b:e2:78:1c sym0: <810> port 0x10000-0x100ff mem 0x81000000-0x810000ff irq 1 at device 1.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x81000000 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 252 msec, 35271 KHz sym0: Delay (GEN=11): 283 msec, 31407 KHz sym0: Delay (GEN=11): 282 msec, 31518 KHz sym0: interrupting at T2 irq 1 (stdio irq 1) sym0: [GIANT-LOCKED] eisab0: at device 2.0 on pci0 eisa0: on eisab0 mainboard0: on eisa0 slot 0 eisa0: unknown card CPQ3111 (0x0e113111) at slot 2 isa0: on eisab0 Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: at iomem 0xc0000-0xc67ff on isa0 ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ata0: interrupting at T2 irq 14 (stdio irq 21) ata0: [MPSAFE] ata1 at port 0x376,0x170-0x177 irq 15 on isa0 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ata1: interrupting at T2 irq 15 (stdio irq 22) ata1: [MPSAFE] atkbdc0: at port 0x64,0x60 on isa0 atkbd0: irq 1 on atkbdc0 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at T2 irq 1 (stdio irq 6) atkbd0: [GIANT-LOCKED] psm0: current command byte:0061 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0: at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: interrupting at T2 irq 6 (stdio irq 7) fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 249772724 Hz (firmware 250000000 Hz) i8254 clock: 1193176 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: on ppc0 lpt0: on ppbus0 lpt0: Polled port ppi0: on ppbus0 ppc0: interrupting at T2 irq 7 (stdio irq 9) sc0: on isa0 sc0: VGA <16 virtual consoles, flags=0x0> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x201 0x211 0x201 0x201 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio0: interrupting at T2 irq 4 (stdio irq 15) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0 sio1: type 16550A sio1: interrupting at T2 irq 3 (stdio irq 8) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices procfs registered Timecounter "i8254" frequency 1193182 Hz quality 0 Timecounters tick every 0.976 msec lo0: bpf attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. md0: Preloaded image 4423680 bytes at 0xfffffc00009c63d8 GEOM: Configure md0a, start 8192 length 4415488 end 4423679 GEOM: Configure md0c, start 0 length 4423680 end 4423679 de0: enabling 10baseT port (probe6:sym0:0:6:0): Retrying Command (probe0:sym0:0:0:0): Retrying Command (probe1:sym0:0:1:0): Retrying Command (probe2:sym0:0:2:0): Retrying Command (probe3:sym0:0:3:0): Retrying Command (probe6:sym0:0:6:0): error 22 (probe6:sym0:0:6:0): Unretryable Error pass0 at sym0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-2 device pass0: Serial Number PCB=ZG50902578 ; HDA=000051261444 pass0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass1 at sym0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-2 device pass1: Serial Number PCB=419250460827(ZG50460827 ?); HDA=0000000050452327 pass1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass2 at sym0 bus 0 target 2 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number PCB=ZG50901887 ; HDA=000051258040 pass2: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass3 at sym0 bus 0 target 3 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number PCB=ZG50891425 ; HDA=000051261132 pass3: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled pass4 at sym0 bus 0 target 6 lun 0 pass4: Removable CD-ROM SCSI-2 device pass4: 4.166MB/s transfers (4.166MHz, offset 8) cd0 at sym0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 4.166MB/s transfers (4.166MHz, offset 8) cd0: cd present [565180 x 512 byte records] da0 at sym0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number PCB=ZG50902578 ; HDA=000051261444 da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) da1 at sym0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number PCB=419250460827(ZG50460827 ?); HDA=0000000050452327 da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da1: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) da2 at sym0 bus 0 target 2 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number PCB=ZG50901887 ; HDA=000051258040 da2: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da2: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) da3 at sym0 bus 0 target 3 lun 0 da3: Fixed Direct Access SCSI-2 device da3: Serial Number PCB=ZG50891425 ; HDA=000051261132 da3: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da3: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C) GEOM: new disk cd0 GEOM: new disk da0 GEOM: new disk da1 GEOM: new disk da2 GEOM: new disk da3 release_aps: releasing secondary CPUs SMP: AP CPU #2 Launched! SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! GEOM: Configure da0a, start 6190080 length 6190080 end 12380159 GEOM: Configure da0b, start 12380160 length 136181760 end 148561919 GEOM: Configure da0c, start 0 length 2102563840 end 2102563839 GEOM: Configure da0d, start 148561920 length 1954001920 end 2102563839 GEOM: Configure da1a, start 0 length 100663296 end 100663295 GEOM: Configure da1b, start 100663296 length 536870912 end 637534207 GEOM: Configure da1c, start 0 length 2104565760 end 2104565759 GEOM: Configure da1e, start 637534208 length 1467031552 end 2104565759 GEOM: Configure da2a, start 0 length 2102563840 end 2102563839 GEOM: Configure da2c, start 0 length 2102563840 end 2102563839 GEOM: Configure da3a, start 0 length 2102563840 end 2102563839 GEOM: Configure da3c, start 0 length 2102563840 end 2102563839 Mounting root from ufs:/dev/md0 WARNING: clock gained 7 days -- CHECK AND RESET THE DATE! start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /stand/sysinstall /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. ===