Date: Sat, 12 Oct 2019 10:03:10 +0200 From: Henri Hennebert <hlh@restart.be> To: Emmanuel Vadot <manu@bidouilliste.com> Cc: Henri Hennebert via freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: PINE64+ 2GB - with U-Boot SPL 2019.10 - bootaa64.efi do not find UFS partition Message-ID: <185f1d4c-deec-35a3-2397-849a32d578d9@restart.be> In-Reply-To: <20191011135048.20f21c963c26852966ab60f2@bidouilliste.com> References: <73fd9b73-e8a8-cd0d-1ff6-92b602d2dbb3@restart.be> <20191011135048.20f21c963c26852966ab60f2@bidouilliste.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/11/19 1:50 PM, Emmanuel Vadot wrote:
> On Fri, 11 Oct 2019 13:36:26 +0200
> Henri Hennebert via freebsd-arm <freebsd-arm@freebsd.org> wrote:
>
>> U-Boot SPL 2019.10 (Oct 10 2019 - 18:05:29 +0200)
>> DRAM: 2048 MiB
>> Trying to boot from MMC1
>> NOTICE: BL31: v2.0(release):
>>
>>>> FreeBSD EFI boot block
>> Loader path: /boot/loader.efi
>>
>> Initializing modules: ZFS UFS
>> Load Path: /efi\boot\bootaa64.efi
>> Load Device:
>> /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,0x01,0,0x403b,0x20000)
>> Probing 3 block devices...... done
>> ZFS found no pools
>> UFS found no partitions
>> Failed to load '/boot/loader.efi'
>> panic: No bootable partitions found!
>> ## Application terminated, r = 1
>>
>> Revert to U-Boot SPL 2019.07 with the same bootaa64.efi boot OK
>>
>> Henri
>
> Is this boot1.efi that you've installed as bootaa64.efi ?
>
> Try installing loader.efi directly.
>
I try with loader.efi as bootaa64.efi to no avail:
U-Boot 2019.10 (Oct 10 2019 - 18:05:29 +0200) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Pine64+
DRAM: 2 GiB
MMC: mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default
environment
In: serial
Out: serial
Err: serial
Net: phy interface7
eth0: ethernet@1c30000
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
scanning bus usb@1c1b000 for devices... EHCI timed out on TD -
token=0x80008d80
USB device not accepting new address (error=22)
1 USB Device(s) found
scanning bus usb@1c1b400 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
31963 bytes read in 3 ms (10.2 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
Scanning disk mmc@1c0f000.blk...
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
607648 bytes read in 29 ms (20 MiB/s)
Consoles: EFI console
efipart_readwrite: rw=1, blk=0 size=1 status=2
efipart_readwrite: rw=1, blk=64 size=1 status=2
efipart_readwrite: rw=1, blk=1 size=1 status=2
efipart_readwrite: rw=1, blk=30883840 size=1 status=2
efipart_readwrite: rw=1, blk=0 size=1 status=2
efipart_readwrite: rw=1, blk=64 size=1 status=2
efipart_readwrite: rw=1, blk=1 size=1 status=2
efipart_readwrite: rw=1, blk=30883840 size=1 status=2
FreeBSD/arm64 EFI loader, Revision 1.1
Command line arguments: loader.efi
EFI version: 2.80
EFI Firmware: Das U-Boot (rev 8217.4096)
Console: efi (0)
Load Path: /efi\boot\bootaa64.efi
Load Device:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0x2b49e90d,0x403b,0x20000)
Trying ESP:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0x2b49e90d,0x403b,0x20000)
Setting currdev to disk0p1:
efipart_readwrite: rw=1, blk=0 size=1 status=2
efipart_readwrite: rw=1, blk=64 size=1 status=2
efipart_readwrite: rw=1, blk=1 size=1 status=2
efipart_readwrite: rw=1, blk=30883840 size=1 status=2
efipart_readwrite: rw=1, blk=0 size=1 status=2
efipart_readwrite: rw=1, blk=64 size=1 status=2
efipart_readwrite: rw=1, blk=1 size=1 status=2
efipart_readwrite: rw=1, blk=30883840 size=1 status=2
Trying:
/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,MBR,0x2b49e90d,0x24400,0x1d4f800)
Setting currdev to disk0p2:
efipart_readwrite: rw=1, blk=0 size=1 status=2
efipart_readwrite: rw=1, blk=64 size=1 status=2
efipart_readwrite: rw=1, blk=1 size=1 status=2
efipart_readwrite: rw=1, blk=30883840 size=1 status=2
efipart_readwrite: rw=1, blk=0 size=1 status=2
efipart_readwrite: rw=1, blk=64 size=1 status=2
efipart_readwrite: rw=1, blk=1 size=1 status=2
efipart_readwrite: rw=1, blk=30883840 size=1 status=2
Failed to find bootable partition
## Application terminated, r = 14 in 1 seconds
EFI LOAD FAILED: continuing...
Device 0: unknown device
ethernet@1c30000 Waiting for PHY auto negotiation to complete.... done
BOOTP broadcast 1
BOOTP broadcast 2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?185f1d4c-deec-35a3-2397-849a32d578d9>