Date: Tue, 11 Mar 1997 21:15:05 -0500 (EST) From: spork <spork@super-g.com> To: raj@cisco.com Cc: freebsd-questions@freebsd.org Subject: Re: Installing using 3COM Etherlink III PCMCIA card Message-ID: <Pine.BSF.3.95.970311211415.17001C-100000@super-g.inch.com> In-Reply-To: <199703112328.PAA25326@rjohnson-home-ss20.cisco.com>
next in thread | previous in thread | raw e-mail | index | archive | help
To start with, you can see the info by hitting "scroll lock" and then you can scroll up and see what the probes say... Charles On Tue, 11 Mar 1997 raj@cisco.com wrote: > I'm having some problems getting the installation code to recognize my > 3COM Etherlink III PCMCIA card. I have removed all other devices > which I don't have from the configuration menu and I have set the > IOBase address to 0x210 (which is what the card's diag's say it's set > to) (the IRQ was already at 0xA) and yet it still doesn't appear in > the list of network interfaces when I try to install from an FTP > server. I tried to look quickly at the bootup messages to see if it's > being recognized at all but the screen is cleared so quickly after > printing it that I didn't have time to read the output. > > Suggestions? > > /raj > > ........................................................................... > Restlessness and discontent are the first necessities of progress. > - Thomas A. Edison >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95.970311211415.17001C-100000>