From owner-freebsd-stable@FreeBSD.ORG Wed Jun 22 15:24:47 2011 Return-Path: Delivered-To: freebsd-stable@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 805E5106566C for ; Wed, 22 Jun 2011 15:24:47 +0000 (UTC) (envelope-from boydjd@jbip.net) Received: from mail-fx0-f54.google.com (mail-fx0-f54.google.com [209.85.161.54]) by mx1.freebsd.org (Postfix) with ESMTP id 66F198FC12 for ; Wed, 22 Jun 2011 15:24:46 +0000 (UTC) Received: by fxm11 with SMTP id 11so1060506fxm.13 for ; Wed, 22 Jun 2011 08:24:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=jbip.net; s=google; h=domainkey-signature:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc:content-type; bh=NTQDXLWvajy3YLpAcjuSZKN8+avLVvbQBsj47nLISII=; b=IWqZwJuyd5iUTTpGBQ2KiktmJKYu3i5fdQIcWROUIyNriKMtKRcGJpccr4YbwsHKrW 1AOHbPxo4RliI9/TheCsJHETpnRQ0sjdQSi4hdXhSl+KjQrR2uPBumVZIvPPxruirMSp wIAvoXFRRszQgh+XEUeGzepEDJ5vqxtP9nA1I= DomainKey-Signature: a=rsa-sha1; c=nofws; d=jbip.net; s=google; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc:content-type; b=N8AtFkmeJHP1L4SticOAIKso9haPtK+Ao9dzxlVx3wYzvNHYRJSszAAE9/q1NNn+fd BQlRniQwUIuxGCoQPvCkftZGg0dRhv+5yrBoy4MnqPcMFJSpJFeVE32Ycj16PfAZf29d gIcw+cCQXnDpbnGe/RxN1RZ0XOdNohO/Gt7+w= Received: by 10.223.97.196 with SMTP id m4mr1010351fan.55.1308756285217; Wed, 22 Jun 2011 08:24:45 -0700 (PDT) MIME-Version: 1.0 Received: by 10.223.25.1 with HTTP; Wed, 22 Jun 2011 08:24:25 -0700 (PDT) In-Reply-To: References: <20110615075754.GA54879@icarus.home.lan> From: Joshua Boyd Date: Wed, 22 Jun 2011 11:24:25 -0400 Message-ID: To: Jack Vogel Content-Type: text/plain; charset=ISO-8859-1 X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-stable , "Vogel, Jack" , Jeremy Chadwick Subject: Re: em0 watchdog timeouts on 8-STABLE X-BeenThere: freebsd-stable@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Production branch of FreeBSD source code List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Wed, 22 Jun 2011 15:24:47 -0000 :( I don't actually have problems normally with maxing out the throughput of the network. Watchdogs only occur when I've got heavy I/O occurring during ZFS scrubs across 2 mpt devices, at about 700MB/s. And then it doesn't matter what kind of traffic I'm running through em0, it still throws watchdogs. During the first occurrence it was actually pretty minimal traffic, less than 100KB/s. Are there any statistics that would be useful to you if I were to trigger the watchdogs again? On Wed, Jun 22, 2011 at 1:22 AM, Jack Vogel wrote: > I cannot repro this, I used your kernel config, this is on a Dell 1850 btw, > I ran netperf stress from 3 clients, and have seen no watchdogs :( > > Jack > > > > On Tue, Jun 21, 2011 at 7:59 PM, Joshua Boyd wrote: > >> If needed, I can reproduce this on demand. Just need to know what sort of >> statistics are needed when the problem is occurring. I've had to turn off my >> weekly scrubs until I can figure out how to fix this problem. >> >> >> On Wed, Jun 15, 2011 at 8:37 PM, Joshua Boyd wrote: >> >>> In the kernel. Here's my kernel configuration: >>> >>> http://pastebin.com/raw.php?i=4JL814m3 >>> >>> On Wed, Jun 15, 2011 at 8:20 PM, Jack Vogel wrote: >>> >>>> I have hardware now, am working on reproducing this. Just curious, do >>>> you have >>>> the em driver defined in the kernel, or as a module? >>>> >>>> Jack >>>> >>>> >>>> On Wed, Jun 15, 2011 at 2:09 AM, Joshua Boyd wrote: >>>> >>>>> On Wed, Jun 15, 2011 at 3:57 AM, Jeremy Chadwick >>>>> wrote: >>>>> >>>>> > On Wed, Jun 15, 2011 at 03:14:43AM -0400, Joshua Boyd wrote: >>>>> > > I recently updated my server to the latest 8-STABLE, and upgraded >>>>> to v28 >>>>> > > ZFS. I have not had these problems on any other version of 8-STABLE >>>>> or >>>>> > > 7-STABLE, which this box was upgraded from some time ago. >>>>> > > >>>>> > > Now, during my weekly scrub, I get the following messages and em0 >>>>> is >>>>> > > unresponsive: >>>>> > > >>>>> > > Jun 12 03:07:58 foghornleghorn kernel: em0: Watchdog timeout -- >>>>> resetting >>>>> > > Jun 12 03:07:58 foghornleghorn kernel: em0: link state changed to >>>>> DOWN >>>>> > > Jun 12 03:08:01 foghornleghorn kernel: em0: link state changed to >>>>> UP >>>>> > > Jun 12 03:08:47 foghornleghorn kernel: em0: Watchdog timeout -- >>>>> resetting >>>>> > > Jun 12 03:08:47 foghornleghorn kernel: em0: link state changed to >>>>> DOWN >>>>> > > Jun 12 03:08:50 foghornleghorn kernel: em0: link state changed to >>>>> UP >>>>> > > >>>>> > > My scrub is scheduled to start at 03:00:00, so it looks like >>>>> watchdog >>>>> > > timeouts start occurring pretty quickly once I/O ramps up. >>>>> > > >>>>> > > Here's some possibly relevant information, let me know if anything >>>>> else >>>>> > > would be helpful to troubleshoot. >>>>> > > >>>>> > > FreeBSD foghornleghorn.res.openband.net 8.2-STABLE FreeBSD >>>>> 8.2-STABLE >>>>> > #17: >>>>> > > Mon Jun 6 19:40:19 EDT 2011 >>>>> > > root@foghornleghorn.res.openband.net: >>>>> /usr/obj/usr/src/sys/FOGHORNLEGHORN >>>>> > > amd64 >>>>> > > >>>>> > > em0: port >>>>> > 0xe800-0xe83f >>>>> > > mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device >>>>> 5.0 on >>>>> > pci7 >>>>> > > >>>>> > > em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 >>>>> rev=0x05 >>>>> > > hdr=0x00 >>>>> > > vendor = 'Intel Corporation' >>>>> > > device = 'Gigabit Ethernet Controller (Copper) rev 5 >>>>> (82541PI)' >>>>> > > class = network >>>>> > > subclass = ethernet >>>>> > > >>>>> > > And, the SAS cards: >>>>> > > >>>>> > > dev.mpt.0.%desc: LSILogic SAS/SATA Adapter >>>>> > > dev.mpt.0.%driver: mpt >>>>> > > dev.mpt.0.%location: slot=0 function=0 >>>>> > > dev.mpt.0.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 >>>>> > > subdevice=0xa580 class=0x010000 >>>>> > > dev.mpt.0.%parent: pci1 >>>>> > > dev.mpt.0.debug: 3 >>>>> > > dev.mpt.0.role: 1 >>>>> > > dev.mpt.1.%desc: LSILogic SAS/SATA Adapter >>>>> > > dev.mpt.1.%driver: mpt >>>>> > > dev.mpt.1.%location: slot=0 function=0 >>>>> > > dev.mpt.1.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x15d9 >>>>> > > subdevice=0xa580 class=0x010000 >>>>> > > dev.mpt.1.%parent: pci2 >>>>> > > dev.mpt.1.debug: 3 >>>>> > > dev.mpt.1.role: 1 >>>>> > > dev.mpt.2.%desc: LSILogic SAS/SATA Adapter >>>>> > > dev.mpt.2.%driver: mpt >>>>> > > dev.mpt.2.%location: slot=0 function=0 >>>>> > > dev.mpt.2.%pnpinfo: vendor=0x1000 device=0x0058 subvendor=0x1000 >>>>> > > subdevice=0x30a0 class=0x010000 >>>>> > > dev.mpt.2.%parent: pci6 >>>>> > > dev.mpt.2.debug: 3 >>>>> > > dev.mpt.2.role: 1 >>>>> > >>>>> > Please provide output from the following commands (as root): >>>>> > >>>>> > # pciconf -lvcb >>>>> > >>>>> >>>>> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 GFX Dual Slot' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (external gfx0 port A)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (external gfx0 port B)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (external gfx1 port A)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 Serial ATA Controller' >>>>> class = mass storage >>>>> subclass = ATA >>>>> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI0)' >>>>> class = serial bus >>>>> subclass = USB >>>>> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI1)' >>>>> class = serial bus >>>>> subclass = USB >>>>> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI2)' >>>>> class = serial bus >>>>> subclass = USB >>>>> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI3)' >>>>> class = serial bus >>>>> subclass = USB >>>>> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI4)' >>>>> class = serial bus >>>>> subclass = USB >>>>> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (EHCI)' >>>>> class = serial bus >>>>> subclass = USB >>>>> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 >>>>> rev=0x14 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'ATI SMBus (ATI RD600/RS600)' >>>>> class = serial bus >>>>> subclass = SMBus >>>>> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' >>>>> class = mass storage >>>>> subclass = ATA >>>>> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 High Definition Audio Controller' >>>>> class = multimedia >>>>> subclass = HDA >>>>> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 PCI to LPC Bridge' >>>>> class = bridge >>>>> subclass = PCI-ISA >>>>> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 PCI to PCI Bridge' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport >>>>> Technology Configuration' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous >>>>> Control' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>>> rev=0x08 >>>>> hdr=0x00 >>>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>>> class = mass storage >>>>> subclass = SCSI >>>>> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>>> rev=0x08 >>>>> hdr=0x00 >>>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>>> class = mass storage >>>>> subclass = SCSI >>>>> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>>> rev=0xb1 >>>>> hdr=0x00 >>>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>>> device = '6121 SATA2 Controller' >>>>> class = mass storage >>>>> subclass = ATA >>>>> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab >>>>> rev=0x12 >>>>> hdr=0x00 >>>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>>> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' >>>>> class = network >>>>> subclass = ethernet >>>>> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>>> rev=0xb2 >>>>> hdr=0x00 >>>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>>> device = '6121 SATA2 Controller' >>>>> class = mass storage >>>>> subclass = ATA >>>>> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 >>>>> rev=0x08 >>>>> hdr=0x00 >>>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>>> class = mass storage >>>>> subclass = SCSI >>>>> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 >>>>> rev=0x05 >>>>> hdr=0x00 >>>>> vendor = 'Intel Corporation' >>>>> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' >>>>> class = network >>>>> subclass = ethernet >>>>> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 >>>>> rev=0x44 >>>>> hdr=0x00 >>>>> vendor = 'S3 Graphics Co., Ltd' >>>>> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' >>>>> class = display >>>>> subclass = VGA >>>>> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 >>>>> rev=0x70 >>>>> hdr=0x00 >>>>> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' >>>>> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' >>>>> class = serial bus >>>>> subclass = FireWire >>>>> [josh@foghornleghorn /var/log]$ sudo su - >>>>> foghornleghorn# pciconf -lvcb >>>>> hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 GFX Dual Slot' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> cap 08[c4] = HT slave >>>>> cap 08[40] = HT retry mode >>>>> cap 08[54] = HT unit ID clumping >>>>> cap 08[9c] = HT unknown d03c >>>>> pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (external gfx0 port A)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >>>>> cap 05[a0] = MSI supports 1 message >>>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>>> ecap 000b[100] = unknown 1 >>>>> ecap 0002[110] = VC 1 max VC0 >>>>> pcib2@pci0:0:3:0: class=0x060400 card=0x59561002 chip=0x59791002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (external gfx0 port B)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >>>>> cap 05[a0] = MSI supports 1 message >>>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>>> ecap 000b[100] = unknown 1 >>>>> ecap 0002[110] = VC 1 max VC0 >>>>> pcib3@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port A)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x2) >>>>> cap 05[a0] = MSI supports 1 message >>>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>>> ecap 000b[100] = unknown 1 >>>>> ecap 0002[110] = VC 1 max VC0 >>>>> pcib4@pci0:0:6:0: class=0x060400 card=0x59561002 chip=0x597c1002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port C)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) >>>>> cap 05[a0] = MSI supports 1 message >>>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>>> ecap 000b[100] = unknown 1 >>>>> ecap 0002[110] = VC 1 max VC0 >>>>> pcib5@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (PCIe gpp port D)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x1(x1) >>>>> cap 05[a0] = MSI supports 1 message >>>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>>> ecap 000b[100] = unknown 1 >>>>> ecap 0002[110] = VC 1 max VC0 >>>>> pcib6@pci0:0:11:0: class=0x060400 card=0x59561002 chip=0x59801002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'RD790 PCI to PCI bridge (external gfx1 port A)' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> cap 01[50] = powerspec 3 supports D0 D3 current D0 >>>>> cap 10[58] = PCI-Express 2 root port max data 128(128) link x4(x8) >>>>> cap 05[a0] = MSI supports 1 message >>>>> cap 0d[b0] = PCI Bridge card=0x59561002 >>>>> cap 08[b8] = HT MSI fixed address window enabled at 0xfee00000 >>>>> ecap 000b[100] = unknown 1 >>>>> ecap 0002[110] = VC 1 max VC0 >>>>> atapci4@pci0:0:18:0: class=0x01018f card=0x81ef1043 chip=0x43801002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 Serial ATA Controller' >>>>> class = mass storage >>>>> subclass = ATA >>>>> bar [10] = type I/O Port, range 32, base 0x5000, size 8, enabled >>>>> bar [14] = type I/O Port, range 32, base 0x4000, size 4, enabled >>>>> bar [18] = type I/O Port, range 32, base 0x3000, size 8, enabled >>>>> bar [1c] = type I/O Port, range 32, base 0x2000, size 4, enabled >>>>> bar [20] = type I/O Port, range 32, base 0x1000, size 16, enabled >>>>> bar [24] = type Memory, range 32, base 0xf71ff800, size 1024, >>>>> enabled >>>>> cap 01[60] = powerspec 2 supports D0 D3 current D0 >>>>> ohci0@pci0:0:19:0: class=0x0c0310 card=0x82881043 chip=0x43871002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI0)' >>>>> class = serial bus >>>>> subclass = USB >>>>> bar [10] = type Memory, range 32, base 0xf71fe000, size 4096, >>>>> enabled >>>>> ohci1@pci0:0:19:1: class=0x0c0310 card=0x82881043 chip=0x43881002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI1)' >>>>> class = serial bus >>>>> subclass = USB >>>>> bar [10] = type Memory, range 32, base 0xf71fd000, size 4096, >>>>> enabled >>>>> ohci2@pci0:0:19:2: class=0x0c0310 card=0x82881043 chip=0x43891002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI2)' >>>>> class = serial bus >>>>> subclass = USB >>>>> bar [10] = type Memory, range 32, base 0xf71fc000, size 4096, >>>>> enabled >>>>> ohci3@pci0:0:19:3: class=0x0c0310 card=0x82881043 chip=0x438a1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI3)' >>>>> class = serial bus >>>>> subclass = USB >>>>> bar [10] = type Memory, range 32, base 0xf71fb000, size 4096, >>>>> enabled >>>>> ohci4@pci0:0:19:4: class=0x0c0310 card=0x82881043 chip=0x438b1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (OHCI4)' >>>>> class = serial bus >>>>> subclass = USB >>>>> bar [10] = type Memory, range 32, base 0xf71fa000, size 4096, >>>>> enabled >>>>> ehci0@pci0:0:19:5: class=0x0c0320 card=0x82881043 chip=0x43861002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 USB Controller (EHCI)' >>>>> class = serial bus >>>>> subclass = USB >>>>> bar [10] = type Memory, range 32, base 0xf71ff000, size 256, >>>>> enabled >>>>> cap 01[c0] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>>> cap 05[d0] = MSI supports 1 message >>>>> cap 0a[e4] = EHCI Debug Port at offset 0xe0 in map 0x14 >>>>> none0@pci0:0:20:0: class=0x0c0500 card=0x82881043 chip=0x43851002 >>>>> rev=0x14 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'ATI SMBus (ATI RD600/RS600)' >>>>> class = serial bus >>>>> subclass = SMBus >>>>> bar [10] = type I/O Port, range 32, base 0xb00, size 16, enabled >>>>> cap 08[b0] = HT MSI fixed address window disabled at 0xfee00000 >>>>> atapci5@pci0:0:20:1: class=0x01018a card=0x82881043 chip=0x438c1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'ATI RD600/RS600 IDE Controller (RD600/RS600)' >>>>> class = mass storage >>>>> subclass = ATA >>>>> bar [10] = type I/O Port, range 32, base 0x1f0, size 8, enabled >>>>> bar [14] = type I/O Port, range 32, base 0x3f4, size 1, enabled >>>>> bar [18] = type I/O Port, range 32, base 0x170, size 8, enabled >>>>> bar [1c] = type I/O Port, range 32, base 0x374, size 1, enabled >>>>> bar [20] = type I/O Port, range 32, base 0xff00, size 16, enabled >>>>> none1@pci0:0:20:2: class=0x040300 card=0x82881043 chip=0x43831002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 High Definition Audio Controller' >>>>> class = multimedia >>>>> subclass = HDA >>>>> bar [10] = type Memory, range 64, base 0xf71f4000, size 16384, >>>>> enabled >>>>> cap 01[50] = powerspec 2 supports D0 D3 current D0 >>>>> isab0@pci0:0:20:3: class=0x060100 card=0x82881043 chip=0x438d1002 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 PCI to LPC Bridge' >>>>> class = bridge >>>>> subclass = PCI-ISA >>>>> pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 >>>>> rev=0x00 >>>>> hdr=0x01 >>>>> vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' >>>>> device = 'IXP SB600 PCI to PCI Bridge' >>>>> class = bridge >>>>> subclass = PCI-PCI >>>>> hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport >>>>> Technology Configuration' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> cap 08[80] = HT host >>>>> hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron Address Map' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous >>>>> Control' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> cap 0f[f0] = unknown >>>>> hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 >>>>> rev=0x00 >>>>> hdr=0x00 >>>>> vendor = 'Advanced Micro Devices (AMD)' >>>>> device = '(Family 10h) Athlon64/Opteron/Sempron Link Control' >>>>> class = bridge >>>>> subclass = HOST-PCI >>>>> mpt0@pci0:1:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>>> rev=0x08 >>>>> hdr=0x00 >>>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>>> class = mass storage >>>>> subclass = SCSI >>>>> bar [10] = type I/O Port, range 32, base 0x6000, size 256, >>>>> disabled >>>>> bar [14] = type Memory, range 64, base 0xf75fc000, size 16384, >>>>> enabled >>>>> bar [1c] = type Memory, range 64, base 0xf75e0000, size 65536, >>>>> enabled >>>>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >>>>> cap 05[98] = MSI supports 1 message, 64 bit >>>>> cap 11[b0] = MSI-X supports 1 message in map 0x14 >>>>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >>>>> mpt1@pci0:2:0:0: class=0x010000 card=0xa58015d9 chip=0x00581000 >>>>> rev=0x08 >>>>> hdr=0x00 >>>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>>> class = mass storage >>>>> subclass = SCSI >>>>> bar [10] = type I/O Port, range 32, base 0x7000, size 256, >>>>> disabled >>>>> bar [14] = type Memory, range 64, base 0xf78fc000, size 16384, >>>>> enabled >>>>> bar [1c] = type Memory, range 64, base 0xf78e0000, size 65536, >>>>> enabled >>>>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >>>>> cap 05[98] = MSI supports 1 message, 64 bit >>>>> cap 11[b0] = MSI-X supports 1 message in map 0x14 >>>>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >>>>> atapci0@pci0:3:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>>> rev=0xb1 >>>>> hdr=0x00 >>>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>>> device = '6121 SATA2 Controller' >>>>> class = mass storage >>>>> subclass = ATA >>>>> bar [10] = type I/O Port, range 32, base 0x9800, size 8, enabled >>>>> bar [14] = type I/O Port, range 32, base 0x9400, size 4, enabled >>>>> bar [18] = type I/O Port, range 32, base 0x9000, size 8, enabled >>>>> bar [1c] = type I/O Port, range 32, base 0x8800, size 4, enabled >>>>> bar [20] = type I/O Port, range 32, base 0x8400, size 16, enabled >>>>> bar [24] = type Memory, range 32, base 0xf79ffc00, size 1024, >>>>> enabled >>>>> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 >>>>> cap 05[50] = MSI supports 1 message >>>>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >>>>> x1(x1) >>>>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 2 corrected >>>>> mskc0@pci0:4:0:0: class=0x020000 card=0x81f81043 chip=0x436411ab >>>>> rev=0x12 >>>>> hdr=0x00 >>>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>>> device = 'Yukon PCI-E Gigabit Ethernet Controller (88E8056)' >>>>> class = network >>>>> subclass = ethernet >>>>> bar [10] = type Memory, range 64, base 0xf7afc000, size 16384, >>>>> enabled >>>>> bar [18] = type I/O Port, range 32, base 0xa800, size 256, enabled >>>>> cap 01[48] = powerspec 3 supports D0 D1 D2 D3 current D0 >>>>> cap 03[50] = VPD >>>>> cap 05[5c] = MSI supports 1 message, 64 bit enabled with 1 message >>>>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >>>>> x1(x1) >>>>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected >>>>> atapci2@pci0:5:0:0: class=0x01018f card=0x612111ab chip=0x612111ab >>>>> rev=0xb2 >>>>> hdr=0x00 >>>>> vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' >>>>> device = '6121 SATA2 Controller' >>>>> class = mass storage >>>>> subclass = ATA >>>>> bar [10] = type I/O Port, range 32, base 0xc800, size 8, enabled >>>>> bar [14] = type I/O Port, range 32, base 0xc400, size 4, enabled >>>>> bar [18] = type I/O Port, range 32, base 0xc000, size 8, enabled >>>>> bar [1c] = type I/O Port, range 32, base 0xb800, size 4, enabled >>>>> bar [20] = type I/O Port, range 32, base 0xb400, size 16, enabled >>>>> bar [24] = type Memory, range 32, base 0xf7bffc00, size 1024, >>>>> enabled >>>>> cap 01[48] = powerspec 2 supports D0 D1 D3 current D0 >>>>> cap 05[50] = MSI supports 1 message >>>>> cap 10[e0] = PCI-Express 1 legacy endpoint max data 128(128) link >>>>> x1(x1) >>>>> ecap 0001[100] = AER 1 0 fatal 0 non-fatal 1 corrected >>>>> mpt2@pci0:6:0:0: class=0x010000 card=0x30a01000 chip=0x00581000 >>>>> rev=0x08 >>>>> hdr=0x00 >>>>> vendor = 'LSI Logic (Was: Symbios Logic, NCR)' >>>>> device = 'SAS 3000 series, 8-port with 1068E -StorPort' >>>>> class = mass storage >>>>> subclass = SCSI >>>>> bar [10] = type I/O Port, range 32, base 0xd000, size 256, >>>>> disabled >>>>> bar [14] = type Memory, range 64, base 0xf7ffc000, size 16384, >>>>> enabled >>>>> bar [1c] = type Memory, range 64, base 0xf7fe0000, size 65536, >>>>> enabled >>>>> cap 01[50] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>>> cap 10[68] = PCI-Express 1 endpoint max data 128(4096) link x4(x8) >>>>> cap 05[98] = MSI supports 1 message, 64 bit >>>>> cap 11[b0] = MSI-X supports 1 message in map 0x14 >>>>> ecap 0001[100] = AER 1 1 fatal 1 non-fatal 0 corrected >>>>> em0@pci0:7:5:0: class=0x020000 card=0x13768086 chip=0x107c8086 >>>>> rev=0x05 >>>>> hdr=0x00 >>>>> vendor = 'Intel Corporation' >>>>> device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' >>>>> class = network >>>>> subclass = ethernet >>>>> bar [10] = type Memory, range 32, base 0xfebe0000, size 131072, >>>>> enabled >>>>> bar [14] = type Memory, range 32, base 0xfebc0000, size 131072, >>>>> enabled >>>>> bar [18] = type I/O Port, range 32, base 0xe800, size 64, enabled >>>>> cap 01[dc] = powerspec 2 supports D0 D3 current D0 >>>>> cap 07[e4] = PCI-X supports 2048 burst read, 1 split transaction >>>>> vgapci0@pci0:7:6:0: class=0x030000 card=0x00000000 chip=0x88115333 >>>>> rev=0x44 >>>>> hdr=0x00 >>>>> vendor = 'S3 Graphics Co., Ltd' >>>>> device = '86C732 Trio32, 86C764 Trio64, 86C765 Trio64V+ Rev 01' >>>>> class = display >>>>> subclass = VGA >>>>> bar [10] = type Memory, range 32, base 0xf8000000, size 67108864, >>>>> enabled >>>>> none2@pci0:7:8:0: class=0x0c0010 card=0x82941043 chip=0x581111c1 >>>>> rev=0x70 >>>>> hdr=0x00 >>>>> vendor = 'Lucent/Agere Systems (Was: AT&T MicroElectronics)' >>>>> device = '1394A PCI PHY/Link Open Host Ctrlr I/F (FW322)' >>>>> class = serial bus >>>>> subclass = FireWire >>>>> bar [10] = type Memory, range 32, base 0xfeb8f000, size 4096, >>>>> enabled >>>>> cap 01[44] = powerspec 2 supports D0 D1 D2 D3 current D0 >>>>> >>>>> >>>>> >>>>> > # vmstat -i >>>>> > >>>>> >>>>> interrupt total rate >>>>> irq9: acpi0 1 0 >>>>> irq16: atapci0+ 2 0 >>>>> irq17: ohci1 ohci3 3 0 >>>>> irq18: mpt0 ohci2+ 7066718 31 >>>>> irq19: mpt1 atapci* 7798877 34 >>>>> irq20: em0 11715792 51 >>>>> irq22: atapci4 628883 2 >>>>> cpu0: timer 455853831 1999 >>>>> irq256: mskc0 97098730 425 >>>>> cpu1: timer 455845190 1999 >>>>> Total 1036008027 4544 >>>>> >>>>> >>>>> >>>>> > # sysctl -a | grep msi >>>>> > >>>>> >>>>> hw.pci.honor_msi_blacklist: 1 >>>>> hw.pci.enable_msix: 1 >>>>> hw.pci.enable_msi: 1 >>>>> >>>>> >>>>> >>>>> > # dmesg >>>>> > >>>>> >>>>> Copyright (c) 1992-2011 The FreeBSD Project. >>>>> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, >>>>> 1994 >>>>> The Regents of the University of California. All rights reserved. >>>>> FreeBSD is a registered trademark of The FreeBSD Foundation. >>>>> FreeBSD 8.2-STABLE #17: Mon Jun 6 19:40:19 EDT 2011 >>>>> root@foghornleghorn.res.openband.net: >>>>> /usr/obj/usr/src/sys/FOGHORNLEGHORN >>>>> amd64 >>>>> Timecounter "i8254" frequency 1193182 Hz quality 0 >>>>> CPU: AMD Phenom(tm) II X2 555 Processor (3209.77-MHz K8-class CPU) >>>>> Origin = "AuthenticAMD" Id = 0x100f43 Family = 10 Model = 4 >>>>> Stepping = >>>>> 3 >>>>> >>>>> >>>>> Features=0x178bfbff >>>>> Features2=0x802009 >>>>> AMD >>>>> >>>>> Features=0xee500800 >>>>> AMD >>>>> >>>>> Features2=0x37ff >>>>> TSC: P-state invariant >>>>> real memory = 8589934592 (8192 MB) >>>>> avail memory = 8257736704 (7875 MB) >>>>> ACPI APIC Table: <092310 OEMAPIC > >>>>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >>>>> FreeBSD/SMP: 1 package(s) x 2 core(s) >>>>> cpu0 (BSP): APIC ID: 0 >>>>> cpu1 (AP): APIC ID: 1 >>>>> ioapic0 irqs 0-23 on motherboard >>>>> acpi0: <092310 OEMRSDT> on motherboard >>>>> acpi0: [ITHREAD] >>>>> acpi0: Power Button (fixed) >>>>> acpi0: reservation of fee00000, 1000 (3) failed >>>>> acpi0: reservation of ffb80000, 80000 (3) failed >>>>> acpi0: reservation of fff00000, 100000 (3) failed >>>>> acpi0: reservation of 0, a0000 (3) failed >>>>> acpi0: reservation of 100000, dff00000 (3) failed >>>>> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 >>>>> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 >>>>> cpu0: on acpi0 >>>>> cpu1: on acpi0 >>>>> acpi_hpet0: iomem 0xfed00000-0xfed003ff on >>>>> acpi0 >>>>> Timecounter "HPET" frequency 14318180 Hz quality 900 >>>>> pcib0: port 0xcf8-0xcff on acpi0 >>>>> pci0: on pcib0 >>>>> pcib1: irq 18 at device 2.0 on pci0 >>>>> pci1: on pcib1 >>>>> mpt0: port 0x6000-0x60ff mem >>>>> 0xf75fc000-0xf75fffff,0xf75e0000-0xf75effff irq 18 at device 0.0 on >>>>> pci1 >>>>> mpt0: [ITHREAD] >>>>> mpt0: MPI Version=1.5.20.0 >>>>> pcib2: irq 19 at device 3.0 on pci0 >>>>> pci2: on pcib2 >>>>> mpt1: port 0x7000-0x70ff mem >>>>> 0xf78fc000-0xf78fffff,0xf78e0000-0xf78effff irq 19 at device 0.0 on >>>>> pci2 >>>>> mpt1: [ITHREAD] >>>>> mpt1: MPI Version=1.5.20.0 >>>>> pcib3: irq 16 at device 4.0 on pci0 >>>>> pci3: on pcib3 >>>>> atapci0: port >>>>> 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f >>>>> mem >>>>> 0xf79ffc00-0xf79fffff irq 16 at device 0.0 on pci3 >>>>> atapci0: [ITHREAD] >>>>> atapci1: on atapci0 >>>>> atapci1: [ITHREAD] >>>>> atapci1: AHCI v1.00 controller with 3 3Gbps ports, PM supported >>>>> ata2: on atapci1 >>>>> ata2: [ITHREAD] >>>>> ata3: on atapci1 >>>>> ata3: [ITHREAD] >>>>> ata4: on atapci0 >>>>> ata4: [ITHREAD] >>>>> pcib4: irq 18 at device 6.0 on pci0 >>>>> pci4: on pcib4 >>>>> mskc0: port 0xa800-0xa8ff mem >>>>> 0xf7afc000-0xf7afffff irq 18 at device 0.0 on pci4 >>>>> msk0: >>>>> on >>>>> mskc0 >>>>> msk0: Ethernet address: 00:1f:c6:e9:f8:7c >>>>> miibus0: on msk0 >>>>> e1000phy0: PHY 0 on miibus0 >>>>> e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, >>>>> 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow >>>>> mskc0: [ITHREAD] >>>>> pcib5: irq 19 at device 7.0 on pci0 >>>>> pci5: on pcib5 >>>>> atapci2: port >>>>> 0xc800-0xc807,0xc400-0xc403,0xc000-0xc007,0xb800-0xb803,0xb400-0xb40f >>>>> mem >>>>> 0xf7bffc00-0xf7bfffff irq 19 at device 0.0 on pci5 >>>>> atapci2: [ITHREAD] >>>>> atapci3: on atapci2 >>>>> atapci3: [ITHREAD] >>>>> atapci3: AHCI v1.00 controller with 3 3Gbps ports, PM supported >>>>> ata5: on atapci3 >>>>> ata5: [ITHREAD] >>>>> ata6: on atapci3 >>>>> ata6: [ITHREAD] >>>>> ata7: on atapci2 >>>>> ata7: [ITHREAD] >>>>> pcib6: irq 19 at device 11.0 on pci0 >>>>> pci6: on pcib6 >>>>> mpt2: port 0xd000-0xd0ff mem >>>>> 0xf7ffc000-0xf7ffffff,0xf7fe0000-0xf7feffff irq 19 at device 0.0 on >>>>> pci6 >>>>> mpt2: [ITHREAD] >>>>> mpt2: MPI Version=1.5.19.0 >>>>> atapci4: port >>>>> 0x5000-0x5007,0x4000-0x4003,0x3000-0x3007,0x2000-0x2003,0x1000-0x100f >>>>> mem >>>>> 0xf71ff800-0xf71ffbff irq 22 at device 18.0 on pci0 >>>>> atapci4: [ITHREAD] >>>>> atapci4: AHCI v1.10 controller with 4 3Gbps ports, PM supported >>>>> ata8: on atapci4 >>>>> ata8: port is not ready (timeout 0ms) tfd = 000001d0 >>>>> ata8: software reset clear timeout >>>>> ata8: [ITHREAD] >>>>> ata9: on atapci4 >>>>> ata9: [ITHREAD] >>>>> ata10: on atapci4 >>>>> ata10: [ITHREAD] >>>>> ata11: on atapci4 >>>>> ata11: [ITHREAD] >>>>> ohci0: mem 0xf71fe000-0xf71fefff irq 16 >>>>> at >>>>> device 19.0 on pci0 >>>>> ohci0: [ITHREAD] >>>>> usbus0: on ohci0 >>>>> ohci1: mem 0xf71fd000-0xf71fdfff irq 17 >>>>> at >>>>> device 19.1 on pci0 >>>>> ohci1: [ITHREAD] >>>>> usbus1: on ohci1 >>>>> ohci2: mem 0xf71fc000-0xf71fcfff irq 18 >>>>> at >>>>> device 19.2 on pci0 >>>>> ohci2: [ITHREAD] >>>>> usbus2: on ohci2 >>>>> ohci3: mem 0xf71fb000-0xf71fbfff irq 17 >>>>> at >>>>> device 19.3 on pci0 >>>>> ohci3: [ITHREAD] >>>>> usbus3: on ohci3 >>>>> ohci4: mem 0xf71fa000-0xf71fafff irq 18 >>>>> at >>>>> device 19.4 on pci0 >>>>> ohci4: [ITHREAD] >>>>> usbus4: on ohci4 >>>>> ehci0: mem 0xf71ff000-0xf71ff0ff >>>>> irq 19 >>>>> at device 19.5 on pci0 >>>>> ehci0: [ITHREAD] >>>>> ehci0: AMD SB600/700 quirk applied >>>>> usbus5: EHCI version 1.0 >>>>> usbus5: on ehci0 >>>>> pci0: at device 20.0 (no driver attached) >>>>> atapci5: port >>>>> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on >>>>> pci0 >>>>> ata0: on atapci5 >>>>> ata0: [ITHREAD] >>>>> pci0: at device 20.2 (no driver attached) >>>>> isab0: at device 20.3 on pci0 >>>>> isa0: on isab0 >>>>> pcib7: at device 20.4 on pci0 >>>>> pci7: on pcib7 >>>>> em0: port >>>>> 0xe800-0xe83f >>>>> mem 0xfebe0000-0xfebfffff,0xfebc0000-0xfebdffff irq 20 at device 5.0 on >>>>> pci7 >>>>> em0: [FILTER] >>>>> em0: Ethernet address: 00:1b:21:4e:e5:2e >>>>> vgapci0: mem 0xf8000000-0xfbffffff at device >>>>> 6.0 on >>>>> pci7 >>>>> pci7: at device 8.0 (no driver attached) >>>>> acpi_button0: on acpi0 >>>>> atrtc0: port 0x70-0x71 irq 8 on acpi0 >>>>> acpi_hpet1: iomem 0xfed00000-0xfed003ff on >>>>> acpi0 >>>>> device_attach: acpi_hpet1 attach returned 12 >>>>> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 >>>>> uart0: [FILTER] >>>>> orm0: at iomem >>>>> 0xc0000-0xc7fff,0xc8000-0xc87ff,0xc8800-0xc97ff on isa0 >>>>> sc0: at flags 0x100 on isa0 >>>>> sc0: VGA <16 virtual consoles, flags=0x300> >>>>> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >>>>> isa0 >>>>> acpi_throttle0: on cpu0 >>>>> acpi_throttle0: CLK_VAL field overlaps THT_EN bit >>>>> device_attach: acpi_throttle0 attach returned 6 >>>>> hwpstate0: on cpu0 >>>>> Timecounters tick every 1.000 msec >>>>> usbus0: 12Mbps Full Speed USB v1.0 >>>>> usbus1: 12Mbps Full Speed USB v1.0 >>>>> usbus2: 12Mbps Full Speed USB v1.0 >>>>> usbus3: 12Mbps Full Speed USB v1.0 >>>>> usbus4: 12Mbps Full Speed USB v1.0 >>>>> usbus5: 480Mbps High Speed USB v2.0 >>>>> ugen0.1: at usbus0 >>>>> uhub0: on usbus0 >>>>> ugen1.1: at usbus1 >>>>> uhub1: on usbus1 >>>>> ugen2.1: at usbus2 >>>>> uhub2: on usbus2 >>>>> ugen3.1: at usbus3 >>>>> uhub3: on usbus3 >>>>> ugen4.1: at usbus4 >>>>> uhub4: on usbus4 >>>>> ugen5.1: at usbus5 >>>>> uhub5: on usbus5 >>>>> ad16: 476940MB at ata8-master UDMA100 SATA >>>>> 3Gb/s >>>>> uhub0: 2 ports with 2 removable, self powered >>>>> uhub1: 2 ports with 2 removable, self powered >>>>> uhub2: 2 ports with 2 removable, self powered >>>>> uhub3: 2 ports with 2 removable, self powered >>>>> uhub4: 2 ports with 2 removable, self powered >>>>> da8 at mpt0 bus 0 scbus0 target 0 lun 0 >>>>> da8: Fixed Direct Access SCSI-5 device >>>>> da8: 300.000MB/s transfers >>>>> da8: Command Queueing enabled >>>>> da8: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da9 at mpt0 bus 0 scbus0 target 1 lun 0 >>>>> da9: Fixed Direct Access SCSI-5 device >>>>> da9: 300.000MB/s transfers >>>>> da9: Command Queueing enabled >>>>> da9: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da10 at mpt0 bus 0 scbus0 target 2 lun 0 >>>>> da10: Fixed Direct Access SCSI-5 device >>>>> da10: 300.000MB/s transfers >>>>> da10: Command Queueing enabled >>>>> da10: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da11 at mpt0 bus 0 scbus0 target 3 lun 0 >>>>> da11: Fixed Direct Access SCSI-5 device >>>>> da11: 300.000MB/s transfers >>>>> da11: Command Queueing enabled >>>>> da11: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da12 at mpt0 bus 0 scbus0 target 4 lun 0 >>>>> da12: Fixed Direct Access SCSI-5 device >>>>> da12: 300.000MB/s transfers >>>>> da12: Command Queueing enabled >>>>> da12: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da13 at mpt0 bus 0 scbus0 target 5 lun 0 >>>>> da13: Fixed Direct Access SCSI-5 device >>>>> da13: 300.000MB/s transfers >>>>> da13: Command Queueing enabled >>>>> da13: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da14 at mpt0 bus 0 scbus0 target 6 lun 0 >>>>> da14: Fixed Direct Access SCSI-5 device >>>>> da14: 300.000MB/s transfers >>>>> da14: Command Queueing enabled >>>>> da14: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da0 at mpt1 bus 0 scbus1 target 0 lun 0 >>>>> da0: Fixed Direct Access SCSI-5 device >>>>> da0: 300.000MB/s transfers >>>>> da0: Command Queueing enabled >>>>> da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>>> da1 at mpt1 bus 0 scbus1 target 1 lun 0 >>>>> da1: Fixed Direct Access SCSI-5 device >>>>> da1: 300.000MB/s transfers >>>>> da1: Command Queueing enabled >>>>> da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>>> da2 at mpt1 bus 0 scbus1 target 2 lun 0 >>>>> da2: Fixed Direct Access SCSI-5 device >>>>> da2: 300.000MB/s transfers >>>>> da2: Command Queueing enabled >>>>> da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>>> da3 at mpt1 bus 0 scbus1 target 3 lun 0 >>>>> da3: Fixed Direct Access SCSI-5 device >>>>> da3: 300.000MB/s transfers >>>>> da3: Command Queueing enabled >>>>> da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>>> da4 at mpt1 bus 0 scbus1 target 4 lun 0 >>>>> da4: Fixed Direct Access SCSI-5 device >>>>> da4: 300.000MB/s transfers >>>>> da4: Command Queueing enabled >>>>> da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C) >>>>> da5 at mpt1 bus 0 scbus1 target 5 lun 0 >>>>> da5: Fixed Direct Access SCSI-5 device >>>>> da5: 300.000MB/s transfers >>>>> da5: Command Queueing enabled >>>>> da5: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da6 at mpt1 bus 0 scbus1 target 6 lun 0 >>>>> da6: Fixed Direct Access SCSI-5 device >>>>> da6: 300.000MB/s transfers >>>>> da6: Command Queueing enabled >>>>> da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> da7 at mpt1 bus 0 scbus1 target 7 lun 0 >>>>> da7: Fixed Direct Access SCSI-5 device >>>>> da7: 300.000MB/s transfers >>>>> da7: Command Queueing enabled >>>>> da7: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C) >>>>> SMP: AP CPU #1 Launched! >>>>> uhub5: 10 ports with 10 removable, self powered >>>>> GEOM: da7: geometry does not match label (16h,63s != 255h,63s). >>>>> Trying to mount root from ufs:/dev/ad16s1a >>>>> WARNING: / was not properly dismounted >>>>> ZFS filesystem version 5 >>>>> ZFS storage pool version 28 >>>>> WARNING: /tmp was not properly dismounted >>>>> WARNING: /usr was not properly dismounted >>>>> WARNING: /var was not properly dismounted >>>>> 0 >>>>> mpt1: request 0xffffff80002c57f0:2369 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c57f0:2369 function 0 >>>>> mpt1: mpt_wait_req(1) timed out >>>>> mpt1: mpt_recover_commands: abort timed-out. Resetting controller >>>>> mpt1: mpt_cam_event: 0x80 >>>>> mpt1: mpt_cam_event: 0x80 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c57f0:2369 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x12 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c5c70:2375 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c5c70:2375 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c5c70:2375 >>>>> mpt1: >>>>> abort of req 0xffffff80002c5c70:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c5fd0:2379 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c5fd0:2379 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c5fd0:2379 >>>>> mpt1: >>>>> abort of req 0xffffff80002c5fd0:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c6210:2383 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c6210:2383 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c6210:2383 >>>>> mpt1: >>>>> abort of req 0xffffff80002c6210:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c6180:2387 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c6180:2387 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c6180:2387 >>>>> mpt1: >>>>> abort of req 0xffffff80002c6180:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c62a0:2391 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c62a0:2391 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c62a0:2391 >>>>> mpt1: >>>>> abort of req 0xffffff80002c62a0:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c6720:2395 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c6720:2395 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c6720:2395 >>>>> mpt1: >>>>> abort of req 0xffffff80002c6720:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: request 0xffffff80002c67b0:2399 timed out for ccb >>>>> 0xffffff00063bb000 >>>>> (req->ccb 0xffffff00063bb000) >>>>> mpt1: attempting to abort req 0xffffff80002c67b0:2399 function 0 >>>>> mpt1: completing timedout/aborted req 0xffffff80002c67b0:2399 >>>>> mpt1: >>>>> abort of req 0xffffff80002c67b0:0 completed >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt1: mpt_cam_event: 0x16 >>>>> mpt0: request 0xffffff80002a69e0:2082 timed out for ccb >>>>> 0xffffff0006389800 >>>>> (req->ccb 0xffffff0006389800) >>>>> mpt0: attempting to abort req 0xffffff80002a69e0:2082 function 0 >>>>> mpt0: completing timedout/aborted req 0xffffff80002a69e0:2082 >>>>> mpt0: abort of req 0xffffff80002a69e0:0 completed >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: request 0xffffff80002a6c20:2086 timed out for ccb >>>>> 0xffffff0006389800 >>>>> (req->ccb 0xffffff0006389800) >>>>> mpt0: attempting to abort req 0xffffff80002a6c20:2086 function 0 >>>>> mpt0: completing timedout/aborted req 0xffffff80002a6c20:2086 >>>>> mpt0: abort of req 0xffffff80002a6c20:0 completed >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: request 0xffffff80002a6cb0:2090 timed out for ccb >>>>> 0xffffff0006389800 >>>>> (req->ccb 0xffffff0006389800) >>>>> mpt0: attempting to abort req 0xffffff80002a6cb0:2090 function 0 >>>>> mpt0: completing timedout/aborted req 0xffffff80002a6cb0:2090 >>>>> mpt0: abort of req 0xffffff80002a6cb0:0 completed >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: request 0xffffff80002a6b90:2094 timed out for ccb >>>>> 0xffffff0006389800 >>>>> (req->ccb 0xffffff0006389800) >>>>> mpt0: attempting to abort req 0xffffff80002a6b90:2094 function 0 >>>>> mpt0: completing timedout/aborted req 0xffffff80002a6b90:2094 >>>>> mpt0: abort of req 0xffffff80002a6b90:0 completed >>>>> mpt0: mpt_cam_event: 0x16 >>>>> mpt0: mpt_cam_event: 0x16 >>>>> tun0: link state changed to UP >>>>> (da8:mpt0:0:0:0): READ(10). CDB: 28 0 3e e2 6f 56 0 0 1 0 >>>>> (da8:mpt0:0:0:0): CAM status: SCSI Status Error >>>>> (da8:mpt0:0:0:0): SCSI status: Check Condition >>>>> (da8:mpt0:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da11:mpt0:0:3:0): READ(10). CDB: 28 0 1a b6 92 0 0 0 80 0 >>>>> (da11:mpt0:0:3:0): CAM status: SCSI Status Error >>>>> (da11:mpt0:0:3:0): SCSI status: Check Condition >>>>> (da11:mpt0:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, >>>>> reset, or >>>>> bus device reset occurred) >>>>> (da2:mpt1:0:2:0): READ(10). CDB: 28 0 76 7b de 0 0 0 80 0 >>>>> (da2:mpt1:0:2:0): CAM status: SCSI Status Error >>>>> (da2:mpt1:0:2:0): SCSI status: Check Condition >>>>> (da2:mpt1:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da10:mpt0:0:2:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 >>>>> (da10:mpt0:0:2:0): CAM status: SCSI Status Error >>>>> (da10:mpt0:0:2:0): SCSI status: Check Condition >>>>> (da10:mpt0:0:2:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, >>>>> reset, or >>>>> bus device reset occurred) >>>>> (da5:mpt1:0:5:0): READ(10). CDB: 28 0 1a ff 67 80 0 0 80 0 >>>>> (da5:mpt1:0:5:0): CAM status: SCSI Status Error >>>>> (da5:mpt1:0:5:0): SCSI status: Check Condition >>>>> (da5:mpt1:0:5:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da7:mpt1:0:7:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 >>>>> (da7:mpt1:0:7:0): CAM status: SCSI Status Error >>>>> (da7:mpt1:0:7:0): SCSI status: Check Condition >>>>> (da7:mpt1:0:7:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da6:mpt1:0:6:0): READ(10). CDB: 28 0 40 d7 da 80 0 0 80 0 >>>>> (da6:mpt1:0:6:0): CAM status: SCSI Status Error >>>>> (da6:mpt1:0:6:0): SCSI status: Check Condition >>>>> (da6:mpt1:0:6:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da0:mpt1:0:0:0): READ(10). CDB: 28 0 76 91 87 e3 0 0 1 0 >>>>> (da0:mpt1:0:0:0): CAM status: SCSI Status Error >>>>> (da0:mpt1:0:0:0): SCSI status: Check Condition >>>>> (da0:mpt1:0:0:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da3:mpt1:0:3:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 >>>>> (da3:mpt1:0:3:0): CAM status: SCSI Status Error >>>>> (da3:mpt1:0:3:0): SCSI status: Check Condition >>>>> (da3:mpt1:0:3:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da1:mpt1:0:1:0): READ(10). CDB: 28 0 76 69 1 1c 0 0 1 0 >>>>> (da1:mpt1:0:1:0): CAM status: SCSI Status Error >>>>> (da1:mpt1:0:1:0): SCSI status: Check Condition >>>>> (da1:mpt1:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da9:mpt0:0:1:0): READ(10). CDB: 28 0 1a b3 d7 0 0 0 80 0 >>>>> (da9:mpt0:0:1:0): CAM status: SCSI Status Error >>>>> (da9:mpt0:0:1:0): SCSI status: Check Condition >>>>> (da9:mpt0:0:1:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> (da4:mpt1:0:4:0): READ(10). CDB: 28 0 53 3c c6 0 0 0 80 0 >>>>> (da4:mpt1:0:4:0): CAM status: SCSI Status Error >>>>> (da4:mpt1:0:4:0): SCSI status: Check Condition >>>>> (da4:mpt1:0:4:0): SCSI sense: UNIT ATTENTION asc:29,0 (Power on, reset, >>>>> or >>>>> bus device reset occurred) >>>>> >>>>> >>>>> >>>>> > >>>>> > -- >>>>> > | Jeremy Chadwick jdc@parodius.com| >>>>> > | Parodius Networking http://www.parodius.com/| >>>>> > | UNIX Systems Administrator Mountain View, CA, US >>>>> | >>>>> > | Making life hard for others since 1977. PGP 4BD6C0CB >>>>> | >>>>> > >>>>> > >>>>> >>>>> >>>>> -- >>>>> Joshua Boyd >>>>> _______________________________________________ >>>>> freebsd-stable@freebsd.org mailing list >>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >>>>> To unsubscribe, send any mail to " >>>>> freebsd-stable-unsubscribe@freebsd.org" >>>>> >>>> >>>> >>> >>> >>> -- >>> Joshua Boyd >>> >> >> >> >> -- >> Joshua Boyd >> >> >> E-mail: boydjd@jbip.net >> http://www.jbip.net >> > > -- Joshua Boyd E-mail: boydjd@jbip.net http://www.jbip.net