From owner-freebsd-questions Sun Aug 6 15:39:37 1995 Return-Path: questions-owner Received: (from majordom@localhost) by freefall.cdrom.com (8.6.11/8.6.6) id PAA13222 for questions-outgoing; Sun, 6 Aug 1995 15:39:37 -0700 Received: from mail1.wolfe.net (mail1.wolfe.net [204.157.98.11]) by freefall.cdrom.com (8.6.11/8.6.6) with ESMTP id PAA13213 for ; Sun, 6 Aug 1995 15:39:34 -0700 Received: from gonzo.wolfe.net (moore@gonzo.wolfe.net [204.157.98.2]) by mail1.wolfe.net (8.6.12/8.6.10) with ESMTP id PAA19560; Sun, 6 Aug 1995 15:41:33 -0700 From: Timothy Moore Received: (moore@localhost) by gonzo.wolfe.net (8.6.10/8.6.9) id PAA10995; Sun, 6 Aug 1995 15:38:49 -0700 Date: Sun, 6 Aug 1995 15:38:49 -0700 Message-Id: <199508062238.PAA10995@gonzo.wolfe.net> To: msmith@atrad.adelaide.edu.au CC: jmb@kryten.Atinc.COM, questions@freebsd.org In-reply-to: Michael Smith's message of Thu, 27 Jul 1995 15:14:07 +0930 (CST) <199507270544.PAA06639@genesis.atrad.adelaide.edu.au> Subject: Re: Problems installing a serial card... Sender: questions-owner@freebsd.org Precedence: bulk Hi, If your remember a couple of weeks ago I was having problems with a serial card. I finally got around to enabling CONFIG_VERBOSE in the sio driver. Here's the dmesg output. The problems are obviously irq related. But, I'm pretty sure I've set the jumpers on the card correctly unless the documentation is completely wrong. See anything obvious? Thanks, Tim 6 2 0x0 0 0 0x0 Yes wdc0 0x1f0 14 -1 0x0 0 0 0x0 Yes wdc1 0x170 15 -1 0x0 0 1 0x0 Yes bt0 0x330 -1 -1 0x0 0 0 0x0 Yes uha0 0x330 -1 5 0x0 0 0 0x0 Yes ahc1 0x0 -1 -1 0x0 0 1 0x0 Yes ahb0 0x0 -1 -1 0x0 0 0 0x0 Yes aha0 0x330 -1 5 0x0 0 0 0x0 Yes aic0 0x340 11 -1 0x0 0 0 0x0 Yes nca0 0x1f88 10 -1 0x0 0 0 0x0 No nca1 0x350 5 -1 0x0 0 1 0x0 No sea0 0x0 5 -1 0xc8000 8192 0 0x0 No wt0 0x300 5 1 0x0 0 0 0x0 No mcd0 0x300 10 -1 0x0 0 0 0x0 No mcd1 0x340 11 -1 0x0 0 1 0x0 No matcd0 0xffffffff -1 -1 0x0 0 0 0x0 Yes scd0 0x230 -1 -1 0x0 0 0 0x0 Yes sc0 0x60 1 -1 0x0 0 0 0x0 Yes sio0 0x3f8 4 -1 0x0 0 0 0x0 Yes sio1 0x2f8 3 -1 0x0 0 1 0x0 Yes sio2 0x3e8 10 -1 0x0 0 2 0x80 Yes sio3 0x2e8 11 -1 0x0 0 3 0x80 Yes Device port irq drq iomem iosize unit flags enabled lpt0 0xffffffff 7 -1 0x0 0 0 0x0 Yes lpt1 0xffffffff -1 -1 0x0 0 1 0x0 Yes lpt2 0xffffffff -1 -1 0x0 0 2 0x0 Yes ed0 0x280 5 -1 0xd8000 0 0 0x0 No ed1 0x300 5 -1 0xd8000 0 1 0x0 Yes ie0 0x360 7 -1 0xd0000 0 0 0x0 No ep0 0x300 10 -1 0x0 0 0 0x0 No ix0 0x300 10 -1 0xd0000 32768 0 0x0 No le0 0x300 5 -1 0xd0000 0 0 0x0 No lnc0 0x280 10 0 0x0 0 0 0x0 No lnc1 0x300 5 5 0x0 0 1 0x0 No ze0 0x300 5 -1 0xd8000 0 0 0x0 No zp0 0x300 10 -1 0xd8000 0 0 0x0 No npx0 0xf0 13 -1 0x0 0 0 0x0 Yes config> quit avail memory = 6873088 (1678 pages) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0: disabled, not probed. ed1 at 0x300-0x31f irq 5 on isa ed1: address 00:c0:0c:20:64:d6, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16450 sio2: probe test 3 failed sio2 not found at 0x3e8 sio3: probe test 5 failed sio3: probe test 8 failed sio3 not found at 0x2e8 lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface lpt1 not found at 0xffffffff lpt2 not found at 0xffffffff fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 765 fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): wd0: 325MB (666600 sectors), 1010 cyls, 12 heads, 55 S/T, 512 B/S wdc1 not found at 0x170 bt0 not found at 0x330 uha0 not found at 0x330 ahc1 not found ahb0 not found aha0 not found at 0x330 aic0 not found at 0x340 nca0: disabled, not probed. nca1: disabled, not probed. sea0: disabled, not probed. wt0: disabled, not probed. mcd0: disabled, not probed. mcd1: disabled, not probed. matcd0 not found at 0xffffffff scd0 not found at 0x230 ie0: disabled, not probed. ep0: disabled, not probed. ix0: disabled, not probed. le0: disabled, not probed. lnc0: disabled, not probed. lnc1: disabled, not probed. ze0: disabled, not probed. zp0: disabled, not probed. npx0 on motherboard npx0: INT 16 interface