Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 5 Jan 2012 11:11:46 +0000 (UTC)
From:      Martin Matuska <mm@FreeBSD.org>
To:        src-committers@freebsd.org, svn-src-all@freebsd.org, svn-src-stable@freebsd.org, svn-src-stable-9@freebsd.org
Subject:   svn commit: r229581 - in stable/9/cddl/contrib/opensolaris/cmd: zfs zpool
Message-ID:  <201201051111.q05BBkU3031150@svn.freebsd.org>

next in thread | raw e-mail | index | archive | help
Author: mm
Date: Thu Jan  5 11:11:46 2012
New Revision: 229581
URL: http://svn.freebsd.org/changeset/base/229581

Log:
  MFC r228206, r228353:
  
  MFC r228206:
  Remove unnecesary "Ns" macros and add missing command example to zpool(8).
  
  MFC r228353:
  Some mdoc(7) style and typo fixes to zfs(8).
  
  Submitted by:	Nobuyuki Koganemaru <n-kogane@syd.odn.ne.jp>

Modified:
  stable/9/cddl/contrib/opensolaris/cmd/zfs/zfs.8
  stable/9/cddl/contrib/opensolaris/cmd/zpool/zpool.8
Directory Properties:
  stable/9/cddl/contrib/opensolaris/   (props changed)

Modified: stable/9/cddl/contrib/opensolaris/cmd/zfs/zfs.8
==============================================================================
--- stable/9/cddl/contrib/opensolaris/cmd/zfs/zfs.8	Thu Jan  5 11:11:33 2012	(r229580)
+++ stable/9/cddl/contrib/opensolaris/cmd/zfs/zfs.8	Thu Jan  5 11:11:46 2012	(r229581)
@@ -377,7 +377,7 @@ property. This directory is created as n
 automatically mounts the file system when the
 .Qq Nm Cm mount Fl a
 command is invoked (without editing
-.Pa /etc/fstab Ns ).
+.Pa /etc/fstab ) .
 The
 .Sy mountpoint
 property can be inherited, so if
@@ -409,7 +409,7 @@ responsible for mounting and unmounting 
 dataset can be attached to a jail by using the
 .Qq Nm Cm jail
 subcommand. You cannot attach a dataset to one jail and the children of the
-same dataset to another jails. To allow managment of the dataset from within
+same dataset to another jails. To allow management of the dataset from within
 a jail, the
 .Sy jailed
 property has to be set. The
@@ -624,10 +624,10 @@ symbol, using one of the following forms
 .Bl -bullet -offset 2n
 .It
 POSIX name (for example,
-.Em joe Ns )
+.Em joe )
 .It
 POSIX numeric ID (for example,
-.Em 1001 Ns )
+.Em 1001 )
 .El
 .It Sy userrefs
 This property is set to the number of user holds on this snapshot. User holds
@@ -673,7 +673,7 @@ snapshot.
 The
 .Ar snapshot
 may be specified as a short snapshot name (just the part after the
-.Sy @ Ns ),
+.Sy @ ) ,
 in which case it will be interpreted as a snapshot in the same filesystem as
 this dataset. The
 .Ar snapshot
@@ -847,7 +847,7 @@ is an integer from 1 (fastest) to 9 (bes
 is equivalent to
 .Cm gzip-6
 (which is also the default for
-.Xr gzip 1 Ns ).
+.Xr gzip 1 ) .
 The
 .Cm zle
 compression algorithm compresses runs of zeros.
@@ -952,7 +952,7 @@ space calculation does not include space
 such as snapshots and clones. User space consumption is identified by the
 .Sy userspace@ Ns Ar user
 property.
-.sp
+.Pp
 Enforcement of user quotas may be delayed by several seconds. This delay means
 that a user might exceed their quota before the system notices that they are
 over quota and begins to refuse additional writes with the
@@ -960,14 +960,14 @@ over quota and begins to refuse addition
 error message. See the
 .Cm userspace
 subcommand for more information.
-.sp
+.Pp
 Unprivileged users can only access their own groups' space usage. The root
 user, or a user who has been granted the
 .Sy userquota
 privilege with
 .Qq Nm Cm allow ,
 can get and set everyone's quota.
-.sp
+.Pp
 This property is not available on volumes, on file systems before version 4, or
 on pools before version 15. The
 .Sy userquota@ Ns ...
@@ -979,17 +979,17 @@ symbol, using one of the following forms
 .Bl -bullet -offset 2n
 .It
 POSIX name (for example,
-.Em joe Ns )
+.Em joe )
 .It
 POSIX numeric ID (for example,
-.Em 1001 Ns )
+.Em 1001 )
 .El
 .It Sy groupquota@ Ns Ar group Ns = Ns Ar size | Cm none
 Limits the amount of space consumed by the specified group. Group space
 consumption is identified by the
 .Sy userquota@ Ns Ar user
 property.
-.sp
+.Pp
 Unprivileged users can access only their own groups' space usage. The root
 user, or a user who has been granted the
 .Sy groupquota
@@ -1020,7 +1020,7 @@ than or equal to 128 Kbytes.
 Changing the file system's
 .Sy recordsize
 affects only files created afterward; existing files are unaffected.
-.sp
+.Pp
 This property can also be referred to by its shortened column name,
 .Sy recsize .
 .It Sy refquota Ns = Ns Ar size | Cm none
@@ -1036,13 +1036,13 @@ The
 .Sy refreservation
 reservation is accounted for in the parent datasets' space used, and counts
 against the parent datasets' quotas and reservations.
-.sp
+.Pp
 If
 .Sy refreservation
 is set, a snapshot is only allowed if there is enough free pool space outside
 of this reservation to accommodate the current number of "referenced" bytes in
 the dataset.
-.sp
+.Pp
 This property can also be referred to by its shortened column name,
 .Sy refreserv .
 .It Sy reservation Ns = Ns Ar size | Cm none
@@ -1161,7 +1161,7 @@ version number of 9 or higher, a
 is set instead. Any changes to
 .Sy volsize
 are reflected in an equivalent change to the reservation (or
-.Sy refreservation Ns ).
+.Sy refreservation ) .
 The
 .Sy volsize
 can only be set to a multiple of
@@ -1174,7 +1174,7 @@ run out of space, resulting in undefined
 on how the volume is used. These effects can also occur when the volume size is
 changed while it is in use (particularly when shrinking the size). Extreme care
 should be used when adjusting the volume size.
-.sp
+.Pp
 Though not recommended, a "sparse volume" (also known as "thin provisioning")
 can be created by specifying the
 .Fl s
@@ -1708,7 +1708,7 @@ Snapshots are displayed if the
 property is
 .Cm on
 (the default is
-.Cm off Ns ).
+.Cm off ) .
 The following fields are displayed,
 .Sy name , used , available , referenced , mountpoint .
 .Bl -tag -width indent
@@ -2168,10 +2168,10 @@ Creates a stream representation of the l
 argument (not part of
 .Fl i
 or
-.Fl I Ns )
+.Fl I )
 which is written to standard output. The output can be redirected to
 a file or to a different system (for example, using
-.Xr ssh 1 Ns ).
+.Xr ssh 1 ) .
 By default, a full stream is generated.
 .Bl -tag -width indent
 .It Fl i Ar snapshot
@@ -2180,10 +2180,10 @@ Generate an incremental stream from the
 to the last
 .Ar snapshot .
 The incremental source (the
-.Fl i Ar snapshot Ns )
+.Fl i Ar snapshot )
 can be specified as the last component of the snapshot name (for example, the
 part after the
-.Sy @ Ns ),
+.Sy @ ) ,
 and it is assumed to be from the same file system as the last
 .Ar snapshot .
 .Pp
@@ -2191,14 +2191,16 @@ If the destination is a clone, the sourc
 must be fully specified (for example, 
 .Cm pool/fs@origin ,
 not just
-.Cm @origin Ns ).
+.Cm @origin ) .
 .It Fl I Ar snapshot
 Generate a stream package that sends all intermediary snapshots from the
-.Fl I Ar snapshot to the last
-.Ar snapshot . For example,
+.Fl I Ar snapshot
+to the last
+.Ar snapshot .
+For example,
 .Ic -I @a fs@d
 is similar to
-.Ic -i @a fs@b; -i @b fs@c; -i @c fs@d Ns .
+.Ic -i @a fs@b; -i @b fs@c; -i @c fs@d .
 The incremental source snapshot may be specified as with the
 .Fl i
 option.
@@ -2223,12 +2225,12 @@ flag is specified when this stream is re
 .It Fl D
 Generate a deduplicated stream. Blocks which would have been sent multiple
 times in the send stream will only be sent once.  The receiving system must
-also support this feature to recieve a deduplicated stream.  This flag can
+also support this feature to receive a deduplicated stream.  This flag can
 be used regardless of the dataset's
 .Sy dedup
 property, but performance will be much better if the filesystem uses a
 dedup-capable checksum (eg.
-.Sy sha256 Ns ).
+.Sy sha256 ) .
 .It Fl r
 Recursively send all descendant snapshots.  This is similar to the
 .Fl R
@@ -2323,14 +2325,14 @@ option is specified, all but the pool na
 appended (for example,
 .Sy b/c@1
 appended from sent snapshot
-.Sy a/b/c@1 Ns ),
+.Sy a/b/c@1 ) ,
 and if the
 .Fl e
 option is specified, only the tail of the sent snapshot path is appended (for
 example,
 .Sy c@1
 appended from sent snapshot
-.Sy a/b/c@1 Ns ).
+.Sy a/b/c@1 ) .
 In the case of
 .Fl d ,
 any file systems needed to replicate the path of the sent snapshot are created
@@ -2349,13 +2351,13 @@ Print verbose information about the stre
 receive operation.
 .It Fl n
 Do not actually receive the stream. This can be useful in conjunction with the
-.It Fl v
+.Fl v
 option to verify the name the receive operation would use.
 .It Fl F
 Force a rollback of the file system to the most recent snapshot before
 performing the receive operation. If receiving an incremental replication
 stream (for example, one generated by
-.Qq Nm Cm send Fl R Fi iI Ns ) ,
+.Qq Nm Cm send Fl R Fi iI ) ,
 destroy snapshots and file systems that do not exist on the sending side.
 .El
 .It Xo
@@ -2409,12 +2411,13 @@ option.
 .Op Fl e
 .Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar ...
 .Xc
-Specifies that the permissions be delegated to "everyone." Multiple permissions
+Specifies that the permissions be delegated to "everyone".
+Multiple permissions
 may be specified as a comma-separated list. Permission names are the same as
 .Tn ZFS
 subcommand and property names. See the property list below. Property set names,
 which begin with an at sign
-.Pq Sy @ Ns ,
+.Pq Sy @ ,
 may be specified. See the
 .Fl s
 form below for details.
@@ -2536,7 +2539,7 @@ commands for the specified file system a
 dynamically, so changes to a set are immediately reflected. Permission sets
 follow the same naming restrictions as ZFS file systems, but the name must
 begin with an "at sign"
-.Pq Sy @ Ns ,
+.Pq Sy @ ,
 and can be no more than 64 characters long.
 .It Xo
 .Nm
@@ -2655,7 +2658,7 @@ Describes differences between a snapshot
 successor dataset can be a later snapshot or the current filesystem.
 .Pp
 The changed files are displayed including the change type. The change type
-is displayed ussing a single character. If a file or directory was renamed,
+is displayed useing a single character. If a file or directory was renamed,
 the old and the new names are displayed.
 .Pp
 The following change types can be displayed:
@@ -2680,9 +2683,9 @@ The following file types can be displaye
 .It \&B Ta block device
 .It \&@ Ta symbolic link
 .It \&= Ta socket
-.It \&> Ta door (not supported on Fx Ns )
-.It \&| Ta FIFO (not supported on Fx Ns )
-.It \&P Ta event portal (not supported on Fx Ns )
+.It \&> Ta door (not supported on Fx )
+.It \&| Ta FIFO (not supported on Fx )
+.It \&P Ta event portal (not supported on Fx )
 .El
 .It Fl H
 Machine-parseable output, fields separated a tab character.

Modified: stable/9/cddl/contrib/opensolaris/cmd/zpool/zpool.8
==============================================================================
--- stable/9/cddl/contrib/opensolaris/cmd/zpool/zpool.8	Thu Jan  5 11:11:33 2012	(r229580)
+++ stable/9/cddl/contrib/opensolaris/cmd/zpool/zpool.8	Thu Jan  5 11:11:46 2012	(r229581)
@@ -195,7 +195,7 @@ are supported:
 .Bl -tag
 .It Sy disk
 A block device, typically located under
-.Pa /dev Ns .
+.Pa /dev .
 .Tn ZFS
 can use individual slices or partitions, though the recommended mode of
 operation is to use whole disks. A disk can be specified by a full path to the
@@ -221,13 +221,14 @@ bytes and can withstand
 .Pq Em N-1
 devices failing before data integrity is compromised.
 .It Sy raidz
-.No ( or Sy raidz1 raidz2 raidz3 Ns ).
+(or
+.Sy raidz1 raidz2 raidz3 ) .
 A variation on
 .Sy RAID-5
 that allows for better distribution of parity and eliminates the
-.Qq Sy RAID-5 No write hole
-(in which data and parity become inconsistent after a power loss). Data and
-parity is striped across all disks within a
+.Qq Sy RAID-5
+write hole (in which data and parity become inconsistent after a power loss).
+Data and parity is striped across all disks within a
 .No raidz
 group.
 .Pp
@@ -251,7 +252,7 @@ type specifies a triple-parity
 group. The
 .Sy raidz No vdev
 type is an alias for
-.Sy raidz1 Ns .
+.Sy raidz1 .
 .Pp
 A
 .No raidz
@@ -322,6 +323,9 @@ are used to distinguish where a group en
 following creates two root
 .No vdev Ns s,
 each a mirror of two disks:
+.Bd -literal -offset 2n
+.Li # Ic zpool create mypool mirror da0 da1 mirror da2 da3
+.Ed
 .Ss Device Failure and Recovery
 .Tn ZFS
 supports a rich set of mechanisms for handling device failure and data
@@ -421,7 +425,7 @@ hardware-dependent and might not be supp
 .Ss Hot Spares
 .Tn ZFS
 allows devices to be associated with pools as
-.Qq hot spares Ns .
+.Qq hot spares .
 These devices are not actively used in the pool, but when an active device
 fails, it is automatically replaced by a hot spare. To create a pool with hot
 spares, specify a 
@@ -537,12 +541,13 @@ Number of blocks within the pool that ar
 A unique identifier for the pool.
 .It Sy health
 The current health of the pool. Health can be
-.Qq Sy ONLINE Ns ,
-.Qq Sy DEGRADED Ns ,
-.Qq Sy FAULTED Ns ,
-.Qq Sy OFFLINE Ns ,
-.Qq Sy REMOVED Ns , or
-.Qq Sy UNAVAIL Ns .
+.Qq Sy ONLINE ,
+.Qq Sy DEGRADED ,
+.Qq Sy FAULTED ,
+.Qq Sy OFFLINE ,
+.Qq Sy REMOVED ,
+or
+.Qq Sy UNAVAIL .
 .It Sy size
 Total size of the storage pool.
 .It Sy used
@@ -577,7 +582,7 @@ is not a persistent property. It is vali
 Setting
 .Sy altroot 
 defaults to using
-.Cm cachefile=none Ns ,
+.Cm cachefile=none ,
 though this may be overridden using an explicit setting.
 .El
 .Pp
@@ -585,7 +590,7 @@ The following property can only be set a
 .Bl -tag -width 2n
 .It Sy readonly Ns = Ns Cm on No | Cm off
 If set to
-.Cm on Ns ,
+.Cm on ,
 pool will be imported in read-only mode with the following restrictions:
 .Bl -bullet -offset 2n
 .It
@@ -606,7 +611,7 @@ command:
 .Bl -tag -width 2n
 .It Sy autoexpand Ns = Ns Cm on No | Cm off
 Controls automatic pool expansion when the underlying LUN is grown. If set to
-.Qq Cm on Ns ,
+.Qq Cm on ,
 the pool will be resized according to the size of the expanded
 device. If the device is part of a mirror or
 .No raidz
@@ -614,20 +619,20 @@ then all devices within that
 .No mirror/ Ns No raidz
 group must be expanded before the new space is made available to
 the pool. The default behavior is
-.Qq off Ns .
+.Qq off .
 This property can also be referred to by its shortened column name,
-.Sy expand Ns .
+.Sy expand .
 .It Sy autoreplace Ns = Ns Cm on No | Cm off
 Controls automatic device replacement. If set to
-.Qq Cm off Ns ,
+.Qq Cm off ,
 device replacement must be initiated by the administrator by using the 
 .Qq Nm Cm replace
 command. If set to 
-.Qq Cm on Ns ,
+.Qq Cm on ,
 any new device, found in the same
 physical location as a device that previously belonged to the pool, is
 automatically formatted and replaced. The default behavior is
-.Qq Cm off Ns .
+.Qq Cm off .
 This property can also be referred to by its shortened column name, "replace".
 .It Sy bootfs Ns = Ns Ar pool Ns / Ns Ar dataset
 Identifies the default bootable dataset for the root pool. This property is
@@ -650,7 +655,7 @@ creates a temporary pool that is never c
 Threshold for the number of block ditto copies. If the reference count for a
 deduplicated block increases above this number, a new ditto copy of this block
 is automatically stored. Deafult setting is
-.Cm 0 Ns .
+.Cm 0 .
 .It Sy delegation Ns = Ns Cm on No | Cm off
 Controls whether a non-privileged user is granted access based on the dataset
 permissions defined on the dataset. See
@@ -694,7 +699,7 @@ decreased. The preferred method of updat
 command, though this property can be used when a specific version is needed
 for backwards compatibility. This property can be any number between 1 and the
 current version reported by
-.Qo Ic zpool upgrade -v Qc Ns .
+.Qo Ic zpool upgrade -v Qc .
 .El
 .Sh SUBCOMMANDS
 All subcommands that modify state are logged persistently to the pool in their
@@ -731,7 +736,7 @@ subcommand.
 .Bl -tag -width indent
 .It Fl f
 Forces use of
-.Ar vdev Ns ,
+.Ar vdev ,
 even if they appear in use or specify a conflicting replication level.
 Not all devices can be overridden in this manner.
 .It Fl n
@@ -762,7 +767,8 @@ configuration. If
 is not currently part of a mirrored configuration,
 .Ar device
 automatically transforms into a two-way mirror of
-.Ar device No and Ar new_device Ns . If
+.Ar device No and Ar new_device .
+If
 .Ar device
 is part of a two-way mirror, attaching
 .Ar new_device
@@ -772,7 +778,7 @@ begins to resilver immediately.
 .Bl -tag -width indent
 .It Fl f
 Forces use of
-.Ar new_device Ns ,
+.Ar new_device ,
 even if its appears to be in use. Not all devices can be overridden in this
 manner.
 .El
@@ -846,7 +852,7 @@ is specified.
 Unless the
 .Fl R
 option is specified, the default mount point is
-.Qq Pa /pool Ns .
+.Qq Pa /pool .
 The mount point must not exist or must be empty, or else the
 root dataset cannot be mounted. This can be overridden with the
 .Fl m
@@ -890,9 +896,11 @@ or
 if
 .Sy altroot
 is specified. The mount point must be an absolute path, 
-.Qq Cm legacy Ns , or Qq Cm none Ns .
+.Qq Cm legacy ,
+or
+.Qq Cm none .
 For more information on dataset mount points, see
-.Xr zfs 8 Ns \&.
+.Xr zfs 8 .
 .El
 .It Xo
 .Nm
@@ -1000,7 +1008,7 @@ performed.
 Lists pools available to import. If the
 .Fl d
 option is not specified, this command searches for devices in
-.Qq Pa /dev Ns .
+.Qq Pa /dev .
 The
 .Fl d
 option can be specified multiple times, and all directories are searched. If
@@ -1028,7 +1036,7 @@ pool property. This
 is used instead of searching for devices.
 .It Fl d Ar dir
 Searches for devices or files in
-.Ar dir Ns .
+.Ar dir .
 The
 .Fl d
 option can be specified multiple times.
@@ -1078,7 +1086,7 @@ pool property. This
 is used instead of searching for devices.
 .It Fl d Ar dir
 Searches for devices or files in
-.Ar dir Ns .
+.Ar dir .
 The
 .Fl d
 option can be specified multiple times. This option is incompatible with the
@@ -1141,7 +1149,7 @@ Imports a specific pool. A pool can be i
 identifier. If
 .Ar newpool
 is specified, the pool is imported using the name
-.Ar newpool Ns .
+.Ar newpool .
 Otherwise, it is imported with the same name as its exported name.
 .Pp
 If a device is removed from a system without running
@@ -1171,7 +1179,7 @@ pool property. This
 is used instead of searching for devices.
 .It Fl d Ar dir
 Searches for devices or files in
-.Ar dir Ns .
+.Ar dir .
 The
 .Fl d
 option can be specified multiple times. This option is incompatible with the
@@ -1236,11 +1244,11 @@ Print a timestamp.
 Use modifier
 .Cm d
 for standard date format. See
-.Xr date 1 Ns .
+.Xr date 1 .
 Use modifier
 .Cm u
 for unixtime
-.Pq equals Qq Ic date +%s Ns .
+.Pq equals Qq Ic date +%s .
 .It Fl v
 Verbose statistics. Reports usage statistics for individual
 .No vdev Ns s
@@ -1256,7 +1264,7 @@ within the pool, in addition to the pool
 Removes
 .Tn ZFS
 label information from the specified
-.Ar device Ns .
+.Ar device .
 The
 .Ar device
 must not be part of an active pool configuration.
@@ -1295,24 +1303,24 @@ instead of arbitrary space.
 Comma-separated list of properties to display. See the
 .Qq Sx Properties
 section for a list of valid properties. The default list is
-.Sy name Ns ,
-.Sy size Ns ,
-.Sy used Ns ,
-.Sy available Ns ,
-.Sy capacity Ns ,
-.Sy health Ns ,
-.Sy altroot Ns .
+.Sy name ,
+.Sy size ,
+.Sy used ,
+.Sy available ,
+.Sy capacity  ,
+.Sy health ,
+.Sy altroot .
 .It Fl T Cm d Ns | Ns Cm u
 Print a timestamp.
 .Pp
 Use modifier
 .Cm d
 for standard date format. See
-.Xr date 1 Ns .
+.Xr date 1 .
 Use modifier
 .Cm u
 for unixtime
-.Pq equals Qq Ic date +%s Ns .
+.Pq equals Qq Ic date +%s .
 .El
 .It Xo
 .Nm
@@ -1380,11 +1388,11 @@ devices cannot be removed from a pool.
 Replaces
 .Ar old_device
 with
-.Ar new_device Ns .
+.Ar new_device .
 This is equivalent to attaching
-.Ar new_device Ns ,
+.Ar new_device ,
 waiting for it to resilver, and then detaching
-.Ar old_device Ns .
+.Ar old_device .
 .Pp
 The size of 
 .Ar new_device
@@ -1397,7 +1405,7 @@ configuration.
 is required if the pool is not redundant. If
 .Ar new_device
 is not specified, it defaults to
-.Ar old_device Ns . 
+.Ar old_device . 
 This form of replacement is useful after an existing disk has failed and has
 been physically replaced. In this case, the new disk may have the same
 .Pa /dev
@@ -1407,7 +1415,7 @@ recognizes this.
 .Bl -tag -width indent
 .It Fl f
 Forces use of
-.Ar new_device Ns ,
+.Ar new_device ,
 even if its appears to be in use. Not all devices can be overridden in this
 manner.
 .El
@@ -1420,7 +1428,7 @@ manner.
 .Pp
 Begins a scrub. The scrub examines all data in the specified pools to verify
 that it checksums correctly. For replicated (mirror or
-.No raidz Ns )
+.No raidz )
 devices,
 .Tn ZFS
 automatically repairs any damage discovered during the scrub. The
@@ -1565,11 +1573,11 @@ Print a timestamp.
 Use modifier
 .Cm d
 for standard date format. See
-.Xr date 1 Ns .
+.Xr date 1 .
 Use modifier
 .Cm u
 for unixtime
-.Pq equals Qq Ic date +%s Ns .
+.Pq equals Qq Ic date +%s .
 .El
 .It Xo
 .Nm
@@ -1649,7 +1657,7 @@ recommended, a pool based on files can b
 .It Sy Example 5 No Adding a Mirror to a Tn ZFS No Storage Pool
 .Pp
 The following command adds two mirrored disks to the pool
-.Em tank Ns ,
+.Em tank ,
 assuming the pool is already made up of two-way mirrors. The additional space
 is immediately available to any datasets within the pool.
 .Bd -literal -offset 2n
@@ -1793,7 +1801,7 @@ subcommand as follows:
 .It Sy Example 15 No Removing a Mirrored Log Device
 .Pp
 The following command removes the mirrored log device
-.Em mirror-2 Ns .
+.Em mirror-2 .
 .Pp
 Given this configuration:
 .Bd -literal -offset 2n



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?201201051111.q05BBkU3031150>