Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 17 Oct 2005 16:54:02 -0400
From:      John Baldwin <jhb@freebsd.org>
To:        freebsd-current@freebsd.org
Cc:        FreeBSD Current <current@freebsd.org>, Andrew Thompson <thompsa@freebsd.org>
Subject:   Re: RC1 panic on boot
Message-ID:  <200510171654.04153.jhb@freebsd.org>
In-Reply-To: <20051015014313.GA25990@heff.fud.org.nz>
References:  <20051015014313.GA25990@heff.fud.org.nz>

next in thread | previous in thread | raw e-mail | index | archive | help
On Friday 14 October 2005 09:43 pm, Andrew Thompson wrote:
> Hi,
>
>
> I am getting this panic on RC1, I am booting disc1 to install the
> system. Its a HP Omnibook 4150 and no PC cards are inserted.
>
> It has 5.4 on the drive at the moment which installed fine. I have
> attached a couple of dmesg logs.
>
>
> Andrew
>
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RC1 #0: Sun Oct  9 20:32:57 UTC 2005
>     root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Celeron (448.05-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x681  Stepping = 1
>  
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV
>,PAT,PSE36,MMX,FXSR,SSE> real memory  = 536870912 (512 MB)
> avail memory = 511746048 (488 MB)
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <HP-MCD CK RSDT> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 10 on acpi0
> pci_link2: <ACPI PCI Link LNKD> irq 10 on acpi0
> unknown: memory range not supported
> unknown: memory range not supported
> unknown: memory range not supported
> unknown: memory range not supported
> unknown: memory range not supported
> unknown: memory range not supported
> acpi_ec0: <Embedded Controller: GPE 0x9> port 0x62,0x66 on acpi0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
> cpu0: <ACPI CPU> on acpi0
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0

Your LNKC pci_link device didn't probe and attach for some reason.  Can you 
post your ASL somewhere?  ACPI is supposed to force all the link devices to 
probe first.

-- 
John Baldwin <jhb@FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200510171654.04153.jhb>