From owner-freebsd-questions Wed Feb 9 16:26:49 2000 Delivered-To: freebsd-questions@freebsd.org Received: from superman.imag.net (superman.imag.net [207.200.148.6]) by builder.freebsd.org (Postfix) with ESMTP id 89F884183 for ; Wed, 9 Feb 2000 16:26:42 -0800 (PST) Received: from mymachine.imag.net (lon-p16.wwdc.com [207.200.138.17]) by superman.imag.net (8.9.3/8.9.3) with SMTP id QAA04249; Wed, 9 Feb 2000 16:26:18 -0800 (PST) From: Mark Hendriks Reply-To: markh@lon.imag.net To: freebsd-questions@FreeBSD.ORG Subject: Re: [repost] Modem configuration troubles under 3.4-S Date: Wed, 9 Feb 2000 18:40:09 -0500 X-Mailer: KMail [version 1.0.21] Content-Type: text/plain References: <87puu8pbrp.fsf@tea.thpoon.com> Cc: a.genkin@utoronto.ca MIME-Version: 1.0 Message-Id: <00020918514000.00267@mymachine.imag.net> Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Your modem really doesn't need a whole lot of "configuration". From a software point of view, a modem is a pretty simple device. As long as it uses the standard AT commands, the only other things the software would need to know are the port and irq numbers. If your modem doesn't work, there's a good chance it's hardware related. On Mon, 07 Feb 2000, Arcady Genkin wrote: > And, lastly, I tried installing mgetty+sendfax, and sendfax complains: > ,---- > | sendfax -v -m ATF -M 7200 9056779381 dhl_fax.g3 > | Trying fax device '/dev/cuaa2'... OK. > | sendfax: cannot set serial port speed 38000 on "cuaa2" > `---- I'd say that this is where the problem actually lies - your serial port isn't being set to the proper speed. Based on what you describe, you serial port is being set to a speed *much* lower than 38000. Unfortunately, as to why your modem would act this way, I really have no idea. Mark Hendriks markh@lon.imag.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message