Date: Thu, 22 Jan 2004 20:21:50 -0600 From: Eric Anderson <anderson@centtech.com> To: David Gilbert <dgilbert@dclg.ca> Cc: Mike Hunter <mhunter@ack.Berkeley.EDU> Subject: Re: [D800] Dell D800 (FBSD 5.2-release) Broadcom BCM5705M MTU/Jumbo Problem Message-ID: <4010853E.20105@centtech.com> In-Reply-To: <16400.33337.986657.212849@canoe.dclg.ca> References: <20040123011206.GA1701@ack.Berkeley.EDU> <4010800A.2050109@centtech.com> <16400.33337.986657.212849@canoe.dclg.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
David Gilbert wrote: >>>>>>"Eric" == Eric Anderson <anderson@centtech.com> writes: >>>>>> >>>>>> > >Eric> As a data point, my BCM5702 (Dell D600) works fine: # ifconfig >Eric> -a bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu >Eric> 9000 options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING> inet6 >Eric> fe80::20b:dbff:fea3:f9a1%bge0 prefixlen 64 scopeid 0x1 inet >Eric> 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255 ether >Eric> 00:0b:db:a3:f9:a1 media: Ethernet autoselect (none) status: no >Eric> carrier > >What is the probe line for your bge? > >Mine is: > >bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3001> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2 >bge0: Ethernet address: 00:0b:db:94:3d:01 >miibus0: <MII bus> on bge0 > > bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfaff0000-0xfaffffff irq 11 at device 0.0 on pci2 bge0: Ethernet address: 00:0b:db:a3:f9:a1 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto Strange - it shows BCM5702, then BCM5703 Eric -- ------------------------------------------------------------------ Eric Anderson Sr. Systems Administrator Centaur Technology Today is the tomorrow you worried about yesterday. ------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4010853E.20105>