From owner-freebsd-sparc64@FreeBSD.ORG Mon May 4 13:49:24 2009 Return-Path: Delivered-To: freebsd-sparc@FreeBSD.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 7BFA9106566C for ; Mon, 4 May 2009 13:49:24 +0000 (UTC) (envelope-from hannula@gmail.com) Received: from mail-ew0-f171.google.com (mail-ew0-f171.google.com [209.85.219.171]) by mx1.freebsd.org (Postfix) with ESMTP id A70188FC12 for ; Mon, 4 May 2009 13:49:23 +0000 (UTC) (envelope-from hannula@gmail.com) Received: by ewy19 with SMTP id 19so3736214ewy.43 for ; Mon, 04 May 2009 06:49:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:mime-version:received:date:message-id:subject :from:to:content-type:content-transfer-encoding; bh=7zZqQlk3tmb6vjUbNKj8rBNn9Le77HfJvZ6YOn/av2U=; b=sHH9wcemQE6LbA7dexEudp2u4+VnEjc4BurG273I+Jtr+seZJf98FQA/SJGn2mZNe1 EJlVhOqFOfTA+gVn7K8ovX3LI9rFmVYxcG6cbVk7QEtRshw/ilmDfU8nAhbXLZEtEJBn HkhMY2xANyywedV4eEpaVbcIpSa9VsB+ltiPw= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type :content-transfer-encoding; b=N+InzwAmwtmylSrjnN11BI/k4SHCjVTjDczre0NIT7UiDKu+xtSmlRyCTMWsb5IjKd aqO/4ET5fVmsJsq6skP+k+WzpMTYLT9c2htqPHg8FceHqUC39zPRy0O0BaedNi1Ltg6w yAnkmhQE//nQCO8wEDhPMvBmQfAbAmq4w8CdA= MIME-Version: 1.0 Received: by 10.210.143.9 with SMTP id q9mr2770551ebd.73.1241443404164; Mon, 04 May 2009 06:23:24 -0700 (PDT) Date: Mon, 4 May 2009 16:23:24 +0300 Message-ID: <4b8db2420905040623o6af3a0c2je96954880a1d32d9@mail.gmail.com> From: Olev To: freebsd-sparc@FreeBSD.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Cc: Subject: 7.2-RELEASE working on Sun Fire V480R X-BeenThere: freebsd-sparc64@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: Porting FreeBSD to the Sparc List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 04 May 2009 13:49:24 -0000 As it is not listed in supported systems I gave it a shot. Installs ok. Onboard ethernet not working. The machine I tested it on has 2x PCI SCSI cards inside and it finds them too. Verbose dmesg below: Sun Fire 480R, No Keyboard Copyright 2007 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.34, 4096 MB memory installed, Serial #53044977. Ethernet address 0:3:ba:29:66:f1, Host ID: 832966f1. Rebooting with command: boot Boot device: disk File and args: >> FreeBSD/sparc64 boot block Boot path: /pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a Boot loader: /boot/loader Consoles: Open Firmware console Booting with sun4u support. FreeBSD/sparc64 bootstrap loader, Revision 1.0 (root@obrian.cse.buffalo.edu, Fri May 1 14:51:37 UTC 2009) bootpath="/pci@9,600000/SUNW,qlc@2/fp@0,0/disk@w21000004cfb551b1,0:a" Loading /boot/defaults/loader.conf /boot/kernel/kernel data=0x7c0348+0x78d48 syms=[0x8+0x823e0+0x8+0x70aa3] / Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel] in 8 seconds... Type '?' for a list of commands, 'help' for more detailed help. OK boot -v jumping to kernel entry at 0xc0078000. Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-RELEASE #0: Sat May 2 08:25:23 UTC 2009 root@obrian.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc092e000. real memory = 4294967296 (4096 MB) avail memory = 4174045184 (3980 MB) machine: SUNW,Sun-Fire-480R cpu0: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) mask=0x23 maxtl=5 maxwin=7 initalizing intr_countp cpu1: Sun Microsystems UltraSparc-III+ Processor (900.00 MHz CPU) mask=0x23 maxtl=5 maxwin=7 INTR: Adding CPU 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs wlan: <802.11 Link Layer> firmware: 'isp_1000' version 1: 20142 bytes loaded at 0xc05fd180 registered firmware set firmware: 'isp_1040' version 1: 22944 bytes loaded at 0xc060202e registered firmware set firmware: 'isp_1040_it' version 1: 32942 bytes loaded at 0xc06079ce registered firmware set firmware: 'isp_1080' version 1: 31350 bytes loaded at 0xc060fa7c registered firmware set firmware: 'isp_1080_it' version 1: 40644 bytes loaded at 0xc06174f2 registered firmware set firmware: 'isp_12160' version 1: 28050 bytes loaded at 0xc06213b6 registered firmware set firmware: 'isp_12160_it' version 1: 40604 bytes loaded at 0xc0628148 registered firmware set firmware: 'isp_2100' version 1: 76770 bytes loaded at 0xc0631fe4 registered firmware set firmware: 'isp_2200' version 1: 77214 bytes loaded at 0xc0644bc6 registered firmware set firmware: 'isp_2300' version 1: 105078 bytes loaded at 0xc0657964 registered firmware set firmware: 'isp_2322' version 1: 108856 bytes loaded at 0xc06713da registered firmware set firmware: 'isp_2400' version 1: 172952 bytes loaded at 0xc068ef94 registered firmware set random: kbd0 at kbdmux0 nfslock: pseudo-device mem: null: openfirm: nexus0: nexus0: mem 0x40000400000-0x40000400047 type memory-controller (no driver attached) nexus0: mem 0x40001400000-0x40001400047 type memory-controller (no driver attached) pcib0: mem 0x40004700000-0x40004717fff,0x40004410000-0x4000441004f,0x7ffee000000-0x7ffee0000ff irq 563,560,561,564,565 on nexus0 pcib0: Schizo, version 4, IGN 0x8, bus B, 33MHz pcib0: DVMA map: 0xc0000000 to 0xffffffff pcib0: bus range 0 to 0; PCI bus 0 pcib0: [FILTER] pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled map[14]: type Memory, range 32, base 0x100000, size 8, enabled map[18]: type Memory, range 32, base 0x102000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=3, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=b, irq=255 map[10]: type I/O Port, range 32, base 0x400, size 8, port disabled map[14]: type Memory, range 32, base 0x104000, size 8, enabled map[18]: type Memory, range 32, base 0x106000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type I/O Port, range 32, base 0x500, size 8, port disabled map[14]: type Memory, range 32, base 0x108000, size 8, enabled map[18]: type Memory, range 32, base 0x10a000, size 12, enabled found-> vendor=0x1000, dev=0x000f, revid=0x14 domain=0, bus=0, slot=4, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0200, cachelnsz=16 (dwords) lattimer=0x88 (4080 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns) intpin=b, irq=255 map[10]: type I/O Port, range 32, base 0x600, size 8, port disabled map[14]: type Memory, range 32, base 0x10c000, size 8, enabled map[18]: type Memory, range 32, base 0x10e000, size 12, enabled found-> vendor=0x1095, dev=0x0646, revid=0x07 domain=0, bus=0, slot=6, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x10 (480 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=255 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type I/O Port, range 32, base 0x700, size 3, port disabled map[14]: type I/O Port, range 32, base 0x718, size 2, enabled map[18]: type I/O Port, range 32, base 0x710, size 3, enabled map[1c]: type I/O Port, range 32, base 0x708, size 2, enabled map[20]: type I/O Port, range 32, base 0x720, size 4, enabled sym0: <875> port 0x300-0x3ff mem 0x100000-0x1000ff,0x102000-0x102fff at device 3.0 on pci0 sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x100000 sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x102000 sym0: chip clock is 40218KHz sym0: No NVRAM, ID 7, Fast-20, SE, parity checking sym0: open drain IRQ line driver, using on-chip SRAM sym0: using LOAD/STORE-based firmware. sym0: [MPSAFE] sym0: [ITHREAD] sym1: <875> port 0x400-0x4ff mem 0x104000-0x1040ff,0x106000-0x106fff at device 3.1 on pci0 sym1: Reserved 0x100 bytes for rid 0x14 type 3 at 0x104000 sym1: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x106000 sym1: chip clock is 40218KHz sym1: No NVRAM, ID 7, Fast-20, SE, parity checking sym1: open drain IRQ line driver, using on-chip SRAM sym1: using LOAD/STORE-based firmware. sym1: [MPSAFE] sym1: [ITHREAD] sym2: <875> port 0x500-0x5ff mem 0x108000-0x1080ff,0x10a000-0x10afff at device 4.0 on pci0 sym2: Reserved 0x100 bytes for rid 0x14 type 3 at 0x108000 sym2: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10a000 sym2: chip clock is 40218KHz sym2: No NVRAM, ID 7, Fast-20, SE, parity checking sym2: open drain IRQ line driver, using on-chip SRAM sym2: using LOAD/STORE-based firmware. sym2: [MPSAFE] sym2: [ITHREAD] sym3: <875> port 0x600-0x6ff mem 0x10c000-0x10c0ff,0x10e000-0x10efff at device 4.1 on pci0 sym3: Reserved 0x100 bytes for rid 0x14 type 3 at 0x10c000 sym3: Reserved 0x1000 bytes for rid 0x18 type 3 at 0x10e000 sym3: chip clock is 40218KHz sym3: No NVRAM, ID 7, Fast-20, SE, parity checking sym3: open drain IRQ line driver, using on-chip SRAM sym3: using LOAD/STORE-based firmware. sym3: [MPSAFE] sym3: [ITHREAD] atapci0: port 0x700-0x707,0x718-0x71b,0x710-0x717,0x708-0x70b,0x720-0x72f at device 6.0 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x720 pcib0: belatedly registered as interrupt controller for vector 0x208 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: HW has secondary channel disabled ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x700 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x718 ata2: reset tp1 mask=03 ostat0=00 ostat1=00 ata2: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata2: stat1=0x00 err=0x04 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=00 stat1=00 devices=0x4 ata2: [MPSAFE] ata2: [ITHREAD] pcib1: mem 0x40004600000-0x40004617fff,0x40004410000-0x4000441004f,0x7ffec000000-0x7ffec0000ff irq 562,560,561,564,566 on nexus0 pcib1: Schizo, version 4, IGN 0x8, bus A, 66MHz Timecounter "pcib1" frequency 150000000 Hz quality 100 pcib1: DVMA map: 0xc0000000 to 0xffffffff pcib1: bus range 0 to 0; PCI bus 0 pcib1: [FILTER] pcib1: [FILTER] pcib1: [FILTER] pcib1: [FILTER] pci1: on pcib1 pci1: domain=1, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=1, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib2: mem 0x40004f00000-0x40004f17fff,0x40004c10000-0x40004c1004f,0x7ffea000000-0x7ffea0000ff irq 627,624,625,628,629 on nexus0 pcib2: Schizo, version 4, IGN 0x9, bus B, 33MHz pcib2: DVMA map: 0xc0000000 to 0xffffffff pcib2: bus range 0 to 0; PCI bus 0 pcib2: [FILTER] pci2: on pcib2 pci2: domain=2, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=2, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x108e, dev=0x1100, revid=0x01 domain=2, bus=0, slot=1, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0146, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x19 (6250 ns) map[10]: type Memory, range 32, base 0x7d000000, size 24, enabled map[14]: type Memory, range 32, base 0x7e000000, size 23, enabled found-> vendor=0x108e, dev=0x1103, revid=0x01 domain=2, bus=0, slot=1, func=3 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0280, cachelnsz=16 (dwords) lattimer=0x50 (2400 ns), mingnt=0x0a (2500 ns), maxlat=0x05 (1250 ns) map[10]: type Memory, range 32, base 0x1000000, size 15, memory disabled found-> vendor=0x108e, dev=0xabba, revid=0x11 domain=2, bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0x200000, size 21, memory disabled ebus0: mem 0x7d000000-0x7dffffff,0x7e000000-0x7e7fffff at device 1.0 on pci2 ebus0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0x7d000000 ebus0: Reserved 0x800000 bytes for rid 0x14 type 3 at 0x7e000000 ebus0: addr 0-0x1fffff (no driver attached) ebus0: addr 0x100000000-0x1000fffff (no driver attached) ebus0: addr 0x10030002e-0x10030002f,0x100300600-0x100300607 (no driver attached) ebus0: addr 0x10000002e-0x10000002f,0x10000002d irq 35 (no driver attached) ebus0: addr 0x100000030-0x100000031 irq 35 (no driver attached) rtc0: addr 0x100300070-0x100300071 irq 36 on ebus0 rtc0: registered as a time-of-day clock (resolution 1000000us) rtc0: invalid timeebus0: addr 0x100300600-0x100300607 (no driver attached) ebus0: addr 0x100300700-0x100300701 (no driver attached) uart0: <16550 or compatible> addr 0x1003062f8-0x1003062ff irq 46 on ebus0 uart0: [FILTER] uart0: fast interrupt uart1: <16550 or compatible> addr 0x1003083f8-0x1003083ff irq 45 on ebus0 uart1: [FILTER] uart1: fast interrupt scc0: addr 0x100400000-0x10040007f irq 34 on ebus0 scc0: not resetting hardware scc0: [FILTER] uart2: on scc0 uart2: [FILTER] uart2: CTS oflow uart2: fast interrupt uart2: console (9600,n,8,1) uart3: on scc0 uart3: [FILTER] uart3: CTS oflow uart3: fast interrupt scc0: fast interrupt ohci0: mem 0x1000000-0x1007fff at device 1.3 on pci2 ohci0: Reserved 0x8000 bytes for rid 0x10 type 3 at 0x1000000 ohci0: (New OHCI DeviceId=0x1103108e) ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: on ohci0 usb0: USB revision 1.0 uhub0: <(0x108e) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 4 ports with 4 removable, self powered pci2: at device 2.0 (no driver attached) pcib3: mem 0x40004e00000-0x40004e17fff,0x40004c10000-0x40004c1004f,0x7ffe8000000-0x7ffe80000ff irq 626,624,625,628,630 on nexus0 pcib3: Schizo, version 4, IGN 0x9, bus A, 66MHz Timecounter "pcib3" frequency 150000000 Hz quality 100 pcib3: DVMA map: 0xc0000000 to 0xffffffff pcib3: bus range 0 to 0; PCI bus 0 pcib3: [FILTER] pcib3: [FILTER] pcib3: [FILTER] pcib3: [FILTER] pci3: on pcib3 pci3: domain=3, physical bus=0 found-> vendor=0x108e, dev=0x8001, revid=0x00 domain=3, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0146, statreg=0x02a0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x108e, dev=0xabba, revid=0x11 domain=3, bus=0, slot=1, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0144, statreg=0x04a0, cachelnsz=16 (dwords) lattimer=0xff (7650 ns), mingnt=0x40 (16000 ns), maxlat=0x40 (16000 ns) intpin=a, irq=255 map[10]: type Memory, range 32, base 0x200000, size 21, memory disabled found-> vendor=0x1077, dev=0x2200, revid=0x05 domain=3, bus=0, slot=2, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0xf8 (7440 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 1 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0x300, size 8, port disabled map[14]: type Memory, range 32, base 0x400000, size 12, memory disabled pci3: at device 1.0 (no driver attached) Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 3.0 isp0: port 0x300-0x3ff mem 0x400000-0x400fff at device 2.0 on pci3 isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0x400000 isp0: using Memory space register mapping isp0: [MPSAFE] isp0: [ITHREAD] isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.6 isp0: Last F/W revision was 2.1.105 isp0: 309 max I/O command limit set isp0: invalid NVRAM header isp0: invalid NVRAM header isp0: Using Node WWN 0x400000007f000009 isp0: Using Port WWN 0x400000007f000009 syscons0: no video adapter found. nexus0: type unknown (no driver attached) Reducing kern.maxvnodes 134011 -> 100000 procfs registered Timecounter "tick" frequency 900000000 Hz quality 10 Timecounters tick every 1.000 msec lo0: bpf attached isp0: LIP Received isp0: Loop UP isp0: Port Database Changed ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire isp0: Firmware State Ready> acd0: setting PIO4 on CMD 646U2 chip isp0: HBA PortID 0x000029 N-Port Handle 109, Connection Topology 'Private Loop' isp0: HBA WWNN 0x400000007f000009 HBA WWPN 0x400000007f000009 isp0: PortID 0x0000ef handle 0x0 role Target arrived at tgt 0 WWNN 0x20000004cfb551b1 WWPN 0x21000004cfb551b1 isp0: PortID 0x0000e8 handle 0x1 role Target arrived at tgt 1 WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed acd0: DVDR drive at ata2 as master acd0: read 4134KB/s (4134KB/s) write 172KB/s, 512KB buffer, PIO4 acd0: Reads: CDDA acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Waiting 5 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym2:0:-1:-1): SCSI BUS reset delivered. (noperiph:sym3:0:-1:-1): SCSI BUS reset delivered. (probe0:isp0:0:0:0): Retrying Command (probe1:isp0:0:1:0): Retrying Command pass0 at isp0 bus 0 target 0 lun 0 pass0: Fixed Direct Access SCSI-3 device pass0: Serial Number 3FP233TR00007316NY71 pass0: 100.000MB/s transfers pass0: Command Queueing Enabled pass1 at isp0 bus 0 target 1 lun 0 pass1: Fixed Direct Access SCSI-3 device pass1: Serial Number 3FP239L000007315HL0H pass1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed PortID 0xe8 pass1: Command Queueing Enabled GEOM: new disk da0 GEOM: new disk da1 da0 at isp0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: Serial Number 3FP233TR00007316NY71 da0: 100.000MB/s transfers da0: Command Queueing Enabled da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) da1 at isp0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: Serial Number 3FP239L000007315HL0H da1: 100.000MB/s transfers WWNN 0x20000004cfb558ed WWPN 0x21000004cfb558ed PortID 0xe8 da1: Command Queueing Enabled da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C) SMP: AP CPU #1 Launched!