From owner-freebsd-stable Tue May 15 10:11:29 2001 Delivered-To: freebsd-stable@freebsd.org Received: from goliath.siemens.de (goliath.siemens.de [194.138.37.131]) by hub.freebsd.org (Postfix) with ESMTP id 4EAD637B422 for ; Tue, 15 May 2001 10:11:16 -0700 (PDT) (envelope-from andre.albsmeier@mchp.siemens.de) X-Envelope-Sender-Is: andre.albsmeier@mchp.siemens.de (at relayer goliath.siemens.de) Received: from mail2.siemens.de (mail2.siemens.de [139.25.208.11]) by goliath.siemens.de (8.11.1/8.11.1) with ESMTP id f4FHBB405192; Tue, 15 May 2001 19:11:11 +0200 (MET DST) Received: from curry.mchp.siemens.de (curry.mchp.siemens.de [139.25.42.7]) by mail2.siemens.de (8.11.0/8.11.0) with ESMTP id f4FHBAB15744; Tue, 15 May 2001 19:11:10 +0200 (MET DST) Received: (from localhost) by curry.mchp.siemens.de (8.11.3/8.11.3) id f4FHBAF70775; Date: Tue, 15 May 2001 19:11:09 +0200 From: Andre Albsmeier To: Jonathan Lemon Cc: stable@FreeBSD.ORG, Andre.Albsmeier@mchp.siemens.de Subject: Re: HEADS UP - fxp now requires miibus Message-ID: <20010515191109.A4853@curry.mchp.siemens.de> References: <20010512192841.I617@prism.flugsvamp.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i In-Reply-To: <20010512192841.I617@prism.flugsvamp.com>; from jlemon@flugsvamp.com on Sat, May 12, 2001 at 07:28:41PM -0500 X-Echelon: BND CIA NSA Mossad KGB MI6 IRA detonator nuclear assault strike Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG On Sat, 12-May-2001 at 19:28:41 -0500, Jonathan Lemon wrote: > I've just merged the -current version of fxp into -stable; > this driver has some additional PHY support. However, you > will have to add "device miibus" to your kernel configuration, > as this is required by the driver. > > I don't anticipate any problems, the driver has been tested > in -current and -stable for a while. Hmm, I have problems with a mchine that contains both: a 100MBit and a 10 Mbit card. The 100MBit card works but the 10MBit doesn't. Here is the dmesg with the new driver: fxp0: port 0x6100-0x613f mem 0xe0100000-0xe011ffff,0xe0121000-0xe0 121fff irq 11 at device 14.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:02:b3:1f:25:dc fxp0: PCI IDs: 8086 1229 8086 0040 fxp0: Chip Type: 0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: fxp0 attached fxp1: port 0x6200-0x621f mem 0xe0000000-0xe00fffff,0xe0120000-0xe0 120fff irq 10 at device 15.0 on pci0 fxp1: using memory space register mapping fxp1: Ethernet address 00:a0:c9:a9:1d:06 fxp1: PCI IDs: 8086 1229 8086 0003 fxp1: Chip Type: 1 fxp1: MII without any PHY! After activating the old driver in sys/conf/files I got it working again: fxp0: port 0x6100-0x613f mem 0xe0100000-0xe011ffff,0xe0121000-0xe0121fff irq 11 at device 14.0 on pci0 fxp0: Ethernet address 00:02:b3:1f:25:dc bpf: fxp0 attached fxp1: port 0x6200-0x621f mem 0xe0000000-0xe00fffff,0xe0120000-0xe0120fff irq 10 at device 15.0 on pci0 fxp1: Ethernet address 00:a0:c9:a9:1d:06, 10Mbps bpf: fxp1 attached root@gate:~>ifconfig fxp0: flags=8843 mtu 1500 inet 192.168.128.1 netmask 0xffffff00 broadcast 192.168.128.255 ether 00:02:b3:1f:25:dc media: 100baseTX status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP fxp1: flags=8843 mtu 1500 inet 146.254.1.172 netmask 0xffffff00 broadcast 146.254.1.255 ether 00:a0:c9:a9:1d:06 media: manual supported media: manual Any hints? Thanks, -Andre To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message