Date: Wed, 8 Nov 2000 21:31:58 +0100 (CET) From: =?ISO-8859-1?Q?G=E9rard_Roudier?= <groudier@club-internet.fr> To: oneflower <oneflower@china.com> Cc: freebsd-hackers@FreeBSD.ORG, freebsd-isp@FreeBSD.ORG, Pam Delaney <pam.delaney@lsil.com> Subject: Re: a problem about install freebsd 4.1.1 on HP Lpr? Message-ID: <Pine.LNX.4.10.10011082105470.1654-100000@linux.local> In-Reply-To: <001701c04991$87ea03c0$656e6dca@oneflower>
next in thread | previous in thread | raw e-mail | index | archive | help
Looks like both the NetRaid firmware and the `sym' driver are in love with
the 895. If I am right, such an evil competition obviously disallows both
of them to succeed their aim. :-)
Given this message,
> Symbios,Inc.Pci boot Rom ,no supported devices found.
The Symbios BIOS seems to detect the situation just fine and discard the
895.
For now, I donnot know how it does, but may-be Pamela knows.
G=E9rard.
On Wed, 8 Nov 2000, oneflower wrote:
> Hello,every one:
>=20
> I have meet a problem when I am installing FreeBSD 4.1.1 on HP LPR.
>=20
> HP LPR:
>=20
> cpu: PIII 650MHZ *2
> memory:384MB
> Disk : 9G scsi-2 *2
> Scsi card: HP NetRaid 1si
> scsi card without raid (HP)
>=20
> PhoenixBIOS 4.06.34 PR
> Symbios,Inc.SDMS (TM) v4.0 PCI SCSI BIOS,PCI Rev. 2.0 ,2.1
> Copyright 1995 ,1998 Symbios,Inc.
> PCI-4.14.04
>=20
> Symbios,Inc.Pci boot Rom ,no supported devices found.
>=20
> HP NetRAID Adapter BIOS VER B.02.02 Apr 03,2000
> Copyright(c) American MegaTrends,Inc.
>=20
>=20
>=20
> the install process stop at this screen:
>=20
> "..........................................
> fxp0:<Inter pro 10/100B/100+ Ethernet> port 0x9400-0x943f mem 0xfa100000-=
0xfa1fffff,
> 0xfa200000-0xfa2fffff irq 11 at device 3.0 on pci1
> fxp0: Ethernet address 00:d0:b7:91:20:d2
> sym0: <895> port 0x9000-0x90ff mem 0xfa201000-0xfa201fff,0xfa202000-0xfa2=
020ff=20
> irq 15 at device 4.0 on pci1"
> =20
>=20
> after a long time ,it repeated messages on screen like :
>=20
> ".......
> (noperiph: sym0:0:-1:-1): SCSI BUS mode change from SE to SE
> sym0:0:iph:sym OUT phase after..........."
>=20
>=20
>=20
> What problem? Who can help me?
>=20
> The Lpr can be installed with windows 2000 Adv Server,run well but boot w=
indows
> needs a lot of time.
> I can't install Redhat 7.0 on it ,too.
> It stoped at load scsi driver.
>=20
>=20
> Best Regards,
>=20
> Flower
> N=85'=B2=E6=ECr=B8=9B{=FB=1E=9D=D9=9A=8A[h=99=A8=E8=AD=DA&=A3=F1ky=E0R=0F=
=FA+=83=08=AD=87=FB=A7=B2=E6=ECr=B8=9By=FA=DEy=BB=1D=FE=16=9C=91=EA=EC=FE)=
=ED=85=E6=E8w*=1F=B6=17=A6z=CB=1A
>=20
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.10.10011082105470.1654-100000>