Date: Mon, 8 Jun 1998 09:55:40 -0500 From: Roger Hall <RHall@esigroup.com> To: QUESTIONS@FreeBSD.ORG Subject: X Server Message-ID: <2C10B557AEBDD011872500A0C933CDDB352606@ESIPROD>
next in thread | raw e-mail | index | archive | help
I am trying to setup an X server (SVGA). Previous help from this list pointed me to xf86config, which I have worked my way through several times now. I have a Dell Trinitron 800HS monitor with a horz 30-70; vert 50-120; 1280x1024@65; 800x60@85. (I tried choosing both 2 and 8 in the monitor refresh prompt.) I found "ARK 2000 1MB" on my video card and traced that to a "Diamond Stealth64 Graphics 2001 series" assuming a RAMDAC of "ics5342". (Choice 140 in the cards, choice 21 in the RAMDAC, choice 4 in the clockchip). I tried "X -probeonly 2>probe.txt" to find the clock but it wouldn't run from anywhere, so I started putting in the clockchip line. When I execute "startx" I get an error. I can't seem to " | more" the output, so I can only see the last screen of messages. <-- Begin Screen --> (--) SVGA: PCI: ARK Logic 2000PV rev 0, Memory @ 0xfec000000 (**) SVGA: ark200pv: ramdac ics5342 (--) SVGA: Using ICS5342 programmable clock (MCLK 1.193 MHz) (--) SVGA: chipset: ark2000pv (--) SVGA: videoram: 1024k (**) SVGA: Using 8 bpp, Depth 8, Color weight: 666 (--) SVGA: Maximum allowed dot-clock: 2.169 MHz (--) SVGA: Clock for mode "640x480" is too high for the configured hardware. Limit is 2.169 MHz (--) SVGA: Removing mode "640x480" from list of valid nodes. (--) SVGA: Clock for mode "800x600" is too high for the configured hardware. Limit is 2.169 MHz (--) SVGA: Removing mode "800x600" from list of valid nodes. (--) SVGA: Clock for mode "1024x768" is too high for the configured hardware. Limit is 2.169 MHz Fatal server error: No valid modes found. When reporting a problem...<del> X connection to : 0.0 broken (explicit kill or server shutdown). <-- End Screen --> I have inspected my "XF86Config" file and found many (more than three) different "Modeline"s, all of which have a DotClock an order of magnitude higher than 2.169. Nothing I've tried so far has given different response. TIA! Roger Roger Hall Webmaster http://www.esigroup.com 501.666.4233.296 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2C10B557AEBDD011872500A0C933CDDB352606>