Date: Fri, 15 Jun 2018 21:40:14 +0300 From: Alexandru Elisei <alexandru.elisei@gmail.com> To: Jim Thompson <jim@netgate.com> Cc: Michael Dexter <editor@callfortesting.org>, freebsd-arm@freebsd.org, "Rodney W. Grimes" <freebsd-rwg@pdx.rh.cn85.dnsmgr.net>, freebsd-virtualization@freebsd.org, Alexandru Elisei <alexandru.elisei@gmail.com> Subject: Re: ARMv8 development board with GICv3 Message-ID: <CAB-4s4=%2Bj_w5MimPmk8_sPKP61f28Fxq7p6s913pGxFTeFKb6g@mail.gmail.com> In-Reply-To: <B02C0869-83AE-43C6-8F20-75E75159E2D1@netgate.com> References: <201806130737.w5D7bHxX038233@pdx.rh.CN85.dnsmgr.net> <91705d37-7a15-afcd-cadd-c14c6a43eb84@callfortesting.org> <CAB-4s4=xxsnCD8i%2Btp4f=6HCyGK9n0ZoYZ=2TLY-tbSQ-uNpPw@mail.gmail.com> <B02C0869-83AE-43C6-8F20-75E75159E2D1@netgate.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Jun 15, 2018 at 8:51 PM, Jim Thompson <jim@netgate.com> wrote: > > > https://gist.github.com/gonzopancho/760ab9ecee9dfbc1b6033e48647a4b48 > > Note: we haven=E2=80=99t upstreamed everything. Yet. Is FreeBSD bootable on the board and the NIC working? > macchiato.bin needs interrupts and NIC drivers, and seems a better target > for bhyve > > machiatto.bin 4C A72 @ 1.6GHz/2.0GHz, 16GB DDR4 > > espresso.bin 2C A53 @1.0GHz and1/2GB DDR3 (*) > > Jim > > (*) Very new espresso.bin has 1.2GHz SoC and DDR4, and you can plug a SAT= A > drive in, including power. > https://i.imgur.com/5fc2vv0.jpg >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB-4s4=%2Bj_w5MimPmk8_sPKP61f28Fxq7p6s913pGxFTeFKb6g>