From owner-freebsd-questions Mon Aug 25 14:06:04 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.7/8.8.7) id OAA09904 for questions-outgoing; Mon, 25 Aug 1997 14:06:04 -0700 (PDT) Received: from zingo.nj.nec.com (zingo.nj.nec.com [138.15.150.106]) by hub.freebsd.org (8.8.7/8.8.7) with ESMTP id OAA09888 for ; Mon, 25 Aug 1997 14:05:59 -0700 (PDT) Received: from penobscot (penobscot [138.15.5.116]) by zingo.nj.nec.com (8.7.4/8.7.3) with SMTP id RAA15071 for ; Mon, 25 Aug 1997 17:05:54 -0400 (EDT) Received: by penobscot (940816.SGI.8.6.9/cliff's joyful mailer #2) id RAA21202(penobscot); Mon, 25 Aug 1997 17:05:53 -0400 To: questions@FreeBSD.ORG Subject: Driver allocation problem with PCCARD 3COM Etherlink III 3C589 Mime-Version: 1.0 (generated by tm-edit 7.106) Content-Type: text/plain; charset=ISO-8859-1 From: Mike Sperber Date: 25 Aug 1997 17:05:53 -0400 Message-ID: Lines: 24 X-Mailer: Gnus v5.4.52/XEmacs 20.2 Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from quoted-printable to 8bit by hub.freebsd.org id OAA09898 Sender: owner-freebsd-questions@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hi, I'm having a problem getting the above setup to work. I have turned on pccardd in rc.conf, stripped pccard.conf down to just that entry, and recompiled the ep0 driver with the standard settings from the LINT configuration. pccardd notices when the card gets inserted, and finds the config entry in pccard.conf, but then says cardd: driver allocation failed for 3Com Corporation I'm somewhat confused by the fact that the kernel config entry for the PCMCIA Etherlink is zp0, not ep0. But with the zp0 driver, the same problem persists. Any help would be much appreciated. (Oh, this is 2.2.2-RELEASE.) -- Cheers =8-} Mike Friede, Völkerverständigung und überhaupt blabla