Date: Thu, 7 Feb 2002 21:28:33 -0600 From: "Brian" <bellsso@telocity.com> To: <freebsd-scsi@FreeBSD.ORG> Subject: SCSI Errors Message-ID: <029601c1b050$b05c8450$1e01a8c0@ellefson.local>
next in thread | raw e-mail | index | archive | help
Hello, Recently I have started seeing errors in the SCSI subsystem. I am running 4.5 RC from Jan 27th. I am seeing erorrs in the logs like the following: Feb 5 09:23:09 db1 /kernel: (da1:sym0:0:1:0): Invalidating pack Feb 5 09:23:11 db1 /kernel: (da1:sym0:0:1:0): Invalidating pack Feb 5 21:35:52 db1 /kernel: sym0: <1010-33> port 0xa400-0xa4ff mem 0xe7002000-0xe7003fff,0xe7005000 -0xe70053ff irq 10 at device 13.0 on pci0 Feb 5 21:35:52 db1 /kernel: sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking Feb 5 21:35:52 db1 /kernel: sym0: open drain IRQ line driver, using on-chip SRAM Feb 5 21:35:52 db1 /kernel: sym0: using LOAD/STORE-based firmware. Feb 5 21:35:52 db1 /kernel: sym0: handling phase mismatch from SCRIPTS. Feb 5 21:35:52 db1 /kernel: (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. Feb 5 21:35:52 db1 /kernel: da0 at sym0 bus 0 target 0 lun 0 Feb 5 21:35:52 db1 /kernel: da1 at sym0 bus 0 target 1 lun 0 Feb 5 21:35:52 db1 /kernel: sym0:1: ERROR (0:c) (8-0-0) (3e/18) @ (scripta 5f8:15000246). Feb 5 21:35:52 db1 /kernel: sym0: script cmd = 11000000 Feb 5 21:35:52 db1 /kernel: sym0: regdump: da 00 c0 18 47 3e 01 0f 6e 08 81 00 80 00 05 02 00 52 a6 2e 00 00 00 00. Feb 5 21:35:52 db1 /kernel: (noperiph:sym0:0:-1:-1): SCSI BUS reset detected. Feb 7 12:56:41 db1 /kernel: sym0: unexpected disconnect Feb 7 12:56:42 db1 /kernel: sym0: unexpected disconnect Feb 7 12:56:46 db1 /kernel: (da1:sym0:0:1:0): Invalidating pack Feb 7 12:56:49 db1 /kernel: (da1:sym0:0:1:0): Invalidating pack Feb 7 14:22:30 db1 /kernel: sym0: <1010-33> port 0xa400-0xa4ff mem 0xe7002000-0xe7003fff,0xe7005000 -0xe70053ff irq 10 at device 13.0 on pci0 Feb 7 14:22:30 db1 /kernel: sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking Feb 7 14:22:30 db1 /kernel: sym0: open drain IRQ line driver, using on-chip SRAM Feb 7 14:22:30 db1 /kernel: sym0: using LOAD/STORE-based firmware. Feb 7 14:22:30 db1 /kernel: sym0: handling phase mismatch from SCRIPTS. Feb 7 14:22:31 db1 /kernel: (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. Feb 7 14:22:31 db1 /kernel: da0 at sym0 bus 0 target 0 lun 0 Feb 7 14:22:31 db1 /kernel: da1 at sym0 bus 0 target 1 lun 0 I am running a Tekram SCSI card, but it has been OK before. Could this be a card going bad? A drive getting ready to die? Termination? Thanks in advance Brian To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?029601c1b050$b05c8450$1e01a8c0>