Date: Wed, 9 Feb 2000 21:17:19 -0700 (MST) From: Ivan Fetch <ivanfetch@technologist.com> To: freebsd-questions@freebsd.org Subject: Assistance needed with pnp command for SoundBlaster 16 Message-ID: <Pine.LNX.4.20.0002092112250.144-100000@ibis.ivanfetch.tzo.com>
next in thread | raw e-mail | index | archive | help
Hello,
I have a SoundBlaster 16 which is not configured (plug and play) by the
BIOS, so I am attempting to configure it via the `pnp' command at the
kernel Config> prompt. I have compiled my kernel with sb0 (as well as the
sb16 driver and the sbmidi driver as instructed in hte handbook). I have
specified the correct IO (220), IRQ (5), and DRQs (5 and 16 for the 16
DMA) when compiling the kernel. I am trying to use a line like the
following, but suspect I have the lcn or device number wrong:
pnp 1 0 enable os port0 220 irq0 5 drq0 5 drq1 16
Variations on the above line always yield: sb0 not found at 0x220. My
reason for not specifying the above port0 address as 0x220, as it seems
like that was read as 540 (or something like that) when I re-output my pnp
command via kget.
Below is my output from pnpinfo -- Any assistance is greatly appreciated.
Checking for Plug-n-Play devices...
Card assigned CSN #1
Vendor ID CTL002c (0x2c008c0e), Serial Number 0x0d59237d
PnP Version 1.0, Vendor Version 16
Device Description: Creative SB16 PnP
Logical Device ID: CTL0031 0x31008c0e #0
Device Description: Audio
TAG Start DF
Good Configuration
IRQ: 5 - only one type (true/edge)
DMA: channel(s) 1
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x220, alignment 0x1, len 0x10
[16-bit addr]
I/O Range 0x330 .. 0x330, alignment 0x1, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5 6 7
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Acceptable Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5 6 7
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
DMA: channel(s) 5 6 7
16-bit, not a bus master, , count by word, Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
I/O Range 0x388 .. 0x388, alignment 0x1, len 0x4
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
I/O Range 0x300 .. 0x330, alignment 0x30, len 0x2
[16-bit addr]
TAG Start DF
Sub-optimal Configuration
IRQ: 5 7 10 11 - only one type (true/edge)
DMA: channel(s) 0 1 3
8-bit, not a bus master, count by byte, , Compatibility mode
I/O Range 0x220 .. 0x280, alignment 0x20, len 0x10
[16-bit addr]
TAG End DF
Logical Device ID: PNPffff 0xffffd041 #1
Device Description: Reserved
I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1
[16-bit addr]
Logical Device ID: PNPffff 0xffffd041 #2
Device Description: Reserved
I/O Range 0x100 .. 0x3f8, alignment 0x8, len 0x1
[16-bit addr]
Logical Device ID: CTL7001 0x01708c0e #3
Compatible Device ID: PNPb02f (2fb0d041)
Device Description: Game
I/O Range 0x200 .. 0x200, alignment 0x1, len 0x8
[16-bit addr]
End Tag
Successfully got 55 resources, 4 logical fdevs
-- card select # 0x0001
CSN CTL002c (0x2c008c0e), Serial Number 0x0d59237d
Logical device #0
IO: 0x00d0 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 5 0
DMA 5 0
IO range check 0x00 activate 0x01
Logical device #1
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
Logical device #2
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
Logical device #3
IO: 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
IRQ 0 0
DMA 4 4
IO range check 0x00 activate 0x00
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.20.0002092112250.144-100000>