Date: Sat, 20 Sep 2014 09:37:41 +0400 From: "Marat N.Afanasyev" <amarat@li.ru> To: Michael Jung <mikej@mikej.com>, freebsd-x11@freebsd.org Subject: Re: Machine lockup - WAS: Re: drmn0: error: GPU lockup CP stall for more than 10000msec Message-ID: <541D12A5.4070807@li.ru> In-Reply-To: <7118ea03de5b97785ccbb476f67253ef@mail.mikej.com> References: <42f077e55c2d4eea5a65f4f83209e26e@mail.mikej.com> <7118ea03de5b97785ccbb476f67253ef@mail.mikej.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Michael Jung wrote: > Since starting to use the DRI driver I am having problems with my machine > locking up. Remote ssh sessions die, keyboard dead, screen blank. > > I am asking for pointers on how to try and debug this. My system is ZFS > on boot so I created a swap partition on USB /dev/da0s1b and added > > dumpdev="/dev/da0p1" > > to rc.conf. After rebooting into single user mode and mounting zfs > partitions "zfs mount -a" I tried > > #savecore /var/crash /dev/da0p1 but savecore complains that no core files > were found. Is kernel dump to USB swap not supported? > > I'm running 10.1-BETA1 with these options added. > > options INVARIANTS > options INVARIANT_SUPPORT > options DEBUG_VFS_LOCKS > > I have not been in front of the box during failure so I am not sure if > it exhibited the behavior shown below or not. > > I have used this box for several years using VESA drivers without issue. > > I'm posting here first since this seems to related to a DRI issue. > > Thanks. > > --mikej > > > On 2014-09-12 14:02, Michael Jung wrote: >> This has happened twice so I thought I would report it. I believe all >> the required info is available in the links below. >> >> X.Org X Server 1.12.4 / 10.1-BETA1 #0 r271460 >> >> I was simply building ports when X11 puked, the console flipped back >> to VT and tried to fire up X11 again. This happened over and over >> until reboot. I did not try unloading the kernel modules and reloading >> them. Please advise what else to do or to collect should this happen >> again. >> >> Lastly, I have been using the VESA driver for a long time on this >> hardware. I just starting using the new ATI driver and VT console. >> >> Thanks. >> >> http://216.26.158.189/x11/devinfo.txt >> http://216.26.158.189/x11/dmesg.fail >> http://216.26.158.189/x11/pciconf.txt >> http://216.26.158.189/x11/pkg.txt >> xorg.conf auto generated >> >> >> rmn0: error: GPU lockup CP stall for more than 10000msec >> drmn0: warning: GPU lockup (waiting for 0x000000000000d969) >> drmn0: error: failed to get a new IB (-11) >> error: [drm:pid5702:radeon_cs_ib_chunk] *ERROR* Failed to get ib ! >> drmn0: info: Saved 1591 dwords of commands on ring 0. >> drmn0: info: GPU softreset: 0x00000003 >> drmn0: info: GRBM_STATUS = 0xA0003828 >> drmn0: info: GRBM_STATUS_SE0 = 0x00000007 >> drmn0: info: GRBM_STATUS_SE1 = 0x00000007 >> drmn0: info: SRBM_STATUS = 0x20000040 >> drmn0: info: R_008674_CP_STALLED_STAT1 = 0x00000000 >> drmn0: info: R_008678_CP_STALLED_STAT2 = 0x00010000 >> drmn0: info: R_00867C_CP_BUSY_STAT = 0x00020106 >> drmn0: info: R_008680_CP_STAT = 0x80038647 >> drmn0: info: GRBM_SOFT_RESET=0x00007F6B >> drmn0: info: GRBM_STATUS = 0x00003828 >> drmn0: info: GRBM_STATUS_SE0 = 0x00000007 >> drmn0: info: GRBM_STATUS_SE1 = 0x00000007 >> drmn0: info: SRBM_STATUS = 0x20000040 >> drmn0: info: R_008674_CP_STALLED_STAT1 = 0x00000000 >> drmn0: info: R_008678_CP_STALLED_STAT2 = 0x00000000 >> drmn0: info: R_00867C_CP_BUSY_STAT = 0x00000000 >> drmn0: info: R_008680_CP_STAT = 0x00000000 >> drmn0: info: GPU reset succeeded, trying to resume >> info: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). >> drmn0: info: WB enabled >> drmn0: info: fence driver on ring 0 use gpu addr 0x0000000020000c00 >> and cpu addr 0x0xfffff8018adfec00 >> drmn0: info: fence driver on ring 3 use gpu addr 0x0000000020000c0c >> and cpu addr 0x0xfffff8018adfec0c >> info: [drm] ring test on 0 succeeded in 2 usecs >> info: [drm] ring test on 3 succeeded in 1 usecs >> drmn0: error: GPU lockup CP stall for more than 10000msec > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" > > I have the same problem and decided to switch back to my 4550 radeon and ums driver, kms is simply too unstable for me, unfortunately -- SY, Marat [-- Attachment #2 --] 0 *H 01 0 + 0 *H i0-0 30 *H 01 0 UIL10U StartCom Ltd.1+0)U "Secure Digital Certificate Signing1806U/StartCom Class 1 Primary Intermediate Client CA0 140829001839Z 150830051817Z0O10U 8OZrXmXZQ3204AnS10U amarat@li.ru10 *H amarat@li.ru0"0 *H 0 z\qHC=.gÆ,TJ9 0r{c`E\ - '=}w 6uNC XtڷPs|,qA~5 Nw_82*83Ĺ/_\"^UMMAq!M pBI Er /f!._,c+ f_["AM ݎ m ZW/1ɞȡ`=F~ܝc C z::c7H*F廤o 00 U 0 0 U 0 U %0++0 U 5C = 0 U #0Sr풜\|~5NԸQ0U 0 amarat@li.ru0LU C0?0; +70*0.+"http://www.startssl.com/policy.pdf0+00' StartCom Certification Authority0This certificate was issued according to the Class 1 Validation requirements of the StartCom CA policy, reliance only for the intended purpose in compliance of the relying party obligations.06U /0-0+)'%http://crl.startssl.com/crtu1-crl.crl0+009+0-http://ocsp.startssl.com/sub/class1/client/ca0B+06http://aia.startssl.com/certs/sub.class1.client.ca.crt0#U 0http://www.startssl.com/0 *H bR:tDֳ| 3K3cT$JI 3;6S=h4P,q2lnvIAZ@x- :CĤ _ƂHj#3Wuة!vڼ 9.9P9 jvߵ.^uA'l%NTM* 6dxZ֩K v.}Вjcy4A7/040 0 *H 0}1 0 UIL10U StartCom Ltd.1+0)U "Secure Digital Certificate Signing1)0'U StartCom Certification Authority0 071024210155Z 171024210155Z01 0 UIL10U StartCom Ltd.1+0)U "Secure Digital Certificate Signing1806U/StartCom Class 1 Primary Intermediate Client CA0"0 *H 0 -).2AUGo#G B|NDRpM-B=o -we5JQpa>O.#._<V [~**pz~3WG .ᘟMlr[<Ce6fqO"uxfWN#uicgkv$Lb%y`_{`xK'GN 00U 00U 0 U Sr풜\|~5NԸQ0 U #0N @[i04hCA0f+Z0X0'+0http://ocsp.startssl.com/ca0-+0!http://www.startssl.com/sfsca.crt0[U T0R0'%#!http://www.startssl.com/sfsca.crl0'%#!http://crl.startssl.com/sfsca.crl0U y0w0u +70f0.+"http://www.startssl.com/policy.pdf04+(http://www.startssl.com/intermediate.pdf0 *H }x,\c^ #wMq}>UK/^yX֏y frMIŲB61ymQҨݬZ0& ;@#13qۑ& ̢o 6r_;GO>*I( 74XS1r3)!LJy6Kotˆ# _wSr ;B ADp(fs 䰷6%.W0J3:bC<8t X1<Cn=t==wST~\wkBf|15zUP)(IjVB!OfI=bb\4-*em/нSJm7N[]'@ڽ D9Kr>R7/|o^I@ټ'Pa $ z9a'L)( I}vcH]۸D*W} m>Q|C.(,lQ10001 0 UIL10U StartCom Ltd.1+0)U "Secure Digital Certificate Signing1806U/StartCom Class 1 Primary Intermediate Client CA 30 + 0 *H 1 *H 0 *H 1 140920053741Z0# *H 1 j]+S!:0l *H 1_0]0 `He*0 `He0 *H 0*H 0 *H @0+0 *H (0 +71001 0 UIL10U StartCom Ltd.1+0)U "Secure Digital Certificate Signing1806U/StartCom Class 1 Primary Intermediate Client CA 30 *H 101 0 UIL10U StartCom Ltd.1+0)U "Secure Digital Certificate Signing1806U/StartCom Class 1 Primary Intermediate Client CA 30 *H 6j|B,'^pמ_UW@EUb"o; GTb[5xr?rHS*̠뀜,[\_.۽X &e #Jȸ@9907SKc3#5nfF,݄]>C746aPO\zL NfcΈjX;m~{2 d<!N` b%;RlJn"ڮhbF:V!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?541D12A5.4070807>