Date: Fri, 19 Apr 2019 14:21:55 -0400 From: "Wallace Barrow" <incin@incin.me> To: "Scott Long" <scottl@samsco.org> Cc: freebsd-scsi@freebsd.org Subject: Re: SAS3008 On FreeBSD 12 wGeli - OS Wont Boot Message-ID: <14e0991e-2e53-4127-baf0-dc674b6d8653@www.fastmail.com> In-Reply-To: <3A9F7544-40A8-4446-ADC8-18CE57A9F55A@samsco.org> References: <a62c7ed3-f5f1-4a5b-83df-949a32b0d8e8@www.fastmail.com> <120DF864-06FB-4396-887B-78DA3E7DA351@samsco.org> <3A9F7544-40A8-4446-ADC8-18CE57A9F55A@samsco.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Scott,=20 You are correct. Installing onto a disk controlled by the SAS3008 works = fine when Geli is not enabled. --=20 Wallace Barrow incin@incin.me On Fri, Apr 19, 2019, at 1:06 PM, Scott Long wrote: > From the loader, set >=20 > hw.mpr.debug_level=3D0xffff >=20 > It=E2=80=99ll dump a lot of text to the console when the kernel boots,= but if=20 > you could send me all if it, I=E2=80=99d appreciate it. For my unders= tanding,=20 > installing onto a disk controlled by the SAS3008 works fine for you as= =20 > long as you don=E2=80=99t enable GELI? >=20 > Thanks,
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14e0991e-2e53-4127-baf0-dc674b6d8653>