From owner-freebsd-questions@FreeBSD.ORG Mon Sep 17 22:18:49 2007 Return-Path: Delivered-To: freebsd-questions@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id DB08316A419 for ; Mon, 17 Sep 2007 22:18:49 +0000 (UTC) (envelope-from miguellangelorj@yahoo.com.br) Received: from web51807.mail.re2.yahoo.com (web51807.mail.re2.yahoo.com [206.190.38.238]) by mx1.freebsd.org (Postfix) with SMTP id 943AC13C46A for ; Mon, 17 Sep 2007 22:18:49 +0000 (UTC) (envelope-from miguellangelorj@yahoo.com.br) Received: (qmail 72133 invoked by uid 60001); 17 Sep 2007 21:52:09 -0000 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=s1024; d=yahoo.com.br; h=X-YMail-OSG:Received:Date:From:Subject:To:MIME-Version:Content-Type:Content-Transfer-Encoding:Message-ID; b=L0sEsWUWWDjXIIq3fNqP1ST3D+ix5X5xb4WFD/h2Q7uVXkMrEbyBPFtso/zRAjCb5b//hNUt8UnVnH01OUUmYOpmz8oi4OmbuUOTj3TeCHylea5XOJD6y1drC1fny+ALzjdPiXm3v0JcgnsPBUrCpd3YD8DbnX6XlBHVu/KpzHI=; X-YMail-OSG: NgqqjbgVM1mzobo8VMoZ_Xp4uV3jYSzPcjO79MFZITarQaH_.7viT6CVQoPLNnoS7EKq2SwrvBqCmJ6dEibffkmuz9CPzn1vS_JuywCw5SEL8xTPtg-- Received: from [128.222.37.20] by web51807.mail.re2.yahoo.com via HTTP; Mon, 17 Sep 2007 18:52:09 ART Date: Mon, 17 Sep 2007 18:52:09 -0300 (ART) From: Miguel Angelo To: freebsd-questions@freebsd.org MIME-Version: 1.0 Message-ID: <811178.71696.qm@web51807.mail.re2.yahoo.com> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Subject: Problem with FreeBSD and external storage X-BeenThere: freebsd-questions@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: User questions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Mon, 17 Sep 2007 22:18:49 -0000 Hi, I'm trying to put external disks(storage) in my FreeBSD server, but, i only can't see the disks that was allocated. I think that is necessary sometype of confugurations, because the hba was installed and all procedures necessary too. For information. Connection type --> SAN with switch MACdata and EMC storage. Note: I can see the storage array in dmesg.(see example above). I would like so much if somewhere can help. thank's for all. ****************************************************************************************** # dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-RELEASE #0: Thu May 31 10:58:03 UTC 2007 root@:/usr/obj/usr/src/sys/LAB MPTable: < Kings Canyon> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2400.10-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebfbff Features2=0x4400> Logical CPUs per core: 2 real memory = 2146959360 (2047 MB) avail memory = 2095882240 (1998 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 6 cpu3 (AP): APIC ID: 7 ioapic0: Assuming intbase of 0 ioapic1: Assuming intbase of 24 ioapic2: Assuming intbase of 48 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard kbd1 at kbdmux0 cpu0 on motherboard cpu1 on motherboard cpu2 on motherboard cpu3 on motherboard pcib0: pcibus 0 on motherboard pci0: on pcib0 pci0: at device 0.1 (no driver attached) pcib1: at device 2.0 on pci0 pci1: on pcib1 pci1: at device 28.0 (no driver attached) pcib2: at device 29.0 on pci1 pci2: on pcib2 mpt0: port 0x3000-0x30ff mem 0xfc220000-0xfc23ffff,0xfc200000-0xfc21ffff irq 48 at device 1.0 on pci2 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 em0: port 0x3400-0x343f mem 0xfc240000-0xfc25ffff irq 54 at device 3.0 on pci2 em0: Ethernet address: 00:30:48:25:6b:ca pci1: at device 30.0 (no driver attached) pcib3: at device 31.0 on pci1 pci3: on pcib3 ahd0: port 0x4400-0x44ff,0x4000-0x40ff mem 0xfc300000-0xfc301fff irq 32 at device 2.0 on pci3 ahd0: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs ahd1: port 0x4c00-0x4cff,0x4800-0x48ff mem 0xfc302000-0xfc303fff irq 33 at device 2.1 on pci3 ahd1: [GIANT-LOCKED] aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs isp0: port 0x5000-0x50ff mem 0xfc304000-0xfc304fff irq 28 at device 3.0 on pci3 isp0: set PCI line size to 16 isp0: [GIANT-LOCKED] isp0: Board Type 2312, Chip Revision 0x2, resident F/W Revision 3.3.19 isp0: 839 max I/O commands supported isp0: NVRAM Port WWN 0x210000e08b9a13ea pci0: at device 29.0 (no driver attached) pci0: at device 29.1 (no driver attached) pci0: at device 29.2 (no driver attached) pcib4: at device 30.0 on pci0 pci4: on pcib4 atapci0: port 0x6c50-0x6c57,0x6c44-0x6c47,0x6c48-0x6c4f,0x6c40-0x6c43,0x6000-0x60ff irq 16 at device 1.0 on pci4 ata2: on atapci0 ata3: on atapci0 atapci1: port 0x6c68-0x6c6f,0x6c5c-0x6c5f,0x6c60-0x6c67,0x6c58-0x6c5b,0x6400-0x64ff irq 16 at device 1.1 on pci4 ata4: on atapci1 ata5: on atapci1 pci4: at device 4.0 (no driver attached) fxp0: port 0x6c00-0x6c3f mem 0xfc401000-0xfc401fff,0xfc420000-0xfc43ffff irq 22 at device 5.0 on pci4 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:30:48:25:6b:cb isab0: at device 31.0 on pci0 isa0: on isab0 atapci2: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2060-0x206f at device 31.1 on pci0 ata0: on atapci2 ata1: on atapci2 pci0: at device 31.3 (no driver attached) pmtimer0 on isa0 orm0: at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc97ff,0xc9800-0xcd7ff,0xe0000-0xe3fff on isa0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: can't assign resources (memory) unknown: can't assign resources (port) unknown: can't assign resources (memory) unknown: can't assign resources (port) unknown: can't assign resources (port) Timecounters tick every 1.000 msec isp0: Loop Reset Received isp0: Loop Reset Received isp0: LIP Received isp0: Point-to-Point mode isp0: Loop UP isp0: Port Database Changed isp0: Firmware State Ready> isp0: Target 126 (Loop 0x7e) Port ID 0xfffffe (role (none)) Arrived Port WWN 0x200d080088037938 Node WWN 0x1000080088037938 isp0: 2Gb link speed/s isp0: Loop ID 255, Port ID 0x610d13, Loop State 0x2, Topology 'F Port' isp0: Target 255 (Loop 0xff) Port ID 0x610d13 (role Initiator) Arrived Port WWN 0x210000e08b9a13ea Node WWN 0x200000e08b9a13ea isp0: Fabric Device @ PortID 0x610413 isp0: Fabric Device @ PortID 0x610d13 isp0: Target 0 (Loop 0x0) Port ID 0x610413 (role Target) Arrived Port WWN 0x5006048c4a859540 Node WWN 0x5006048c4a859540 acd0: CDROM at ata0-master UDMA33 ad4: 76319MB at ata2-master UDMA100 ad6: 76319MB at ata3-master UDMA100 ad9: 381554MB at ata4-slave UDMA100 ad11: 381554MB at ata5-slave UDMA100 Waiting 5 seconds for SCSI devices to settle pass0 at isp0 bus 0 target 0 lun 0 pass0: Fixed Storage Array SCSI-2 device pass0: 200.000MB/s transfers, Tagged Queueing Enabled ar0: 76319MB status: READY ar0: disk0 READY (master) using ad4 at ata2-master ar0: disk1 READY (mirror) using ad6 at ata3-master ar1: 381554MB status: READY ar1: disk0 READY (master) using ad9 at ata4-slave ar1: disk1 READY (mirror) using ad11 at ata5-slave SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/ar0s1a uhci0: port 0x2000-0x201f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x2020-0x203f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x2040-0x205f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered # **************************************************************************************** Sds, Miguel Angelo Flickr agora em português. Você clica, todo mundo vê. Saiba mais.