From owner-freebsd-hackers Tue Aug 12 06:22:31 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id GAA20862 for hackers-outgoing; Tue, 12 Aug 1997 06:22:31 -0700 (PDT) Received: from oskar.nanoteq.co.za (oskar.nanoteq.co.za [163.195.220.170]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id GAA20838 for ; Tue, 12 Aug 1997 06:22:10 -0700 (PDT) Received: (from rbezuide@localhost) by oskar.nanoteq.co.za (8.8.5/8.8.5) id PAA07662 for freebsd-hackers@freebsd.org; Tue, 12 Aug 1997 15:21:59 +0200 (SAT) From: Reinier Bezuidenhout Message-Id: <199708121321.PAA07662@oskar.nanoteq.co.za> Subject: Can't mount worm0 To: freebsd-hackers@freebsd.org Date: Tue, 12 Aug 1997 15:21:58 +0200 (SAT) X-Mailer: ELM [version 2.4ME+ PL28 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-freebsd-hackers@freebsd.org X-Loop: FreeBSD.org Precedence: bulk Hi ... I have the following setup 200 MHz pentium - running FreeBSD 3.0-970713-SNAP 128 MB ram Adaptec 2940UW SCSI controll SCSI disk WD Enterprise HP 4020i CDR When booting the machine the CDR is probed as worm0, I have made a sh MAKEDEV worm0 in the /dev durectory, but when I try to mount ANY CD in the drive it gives me the following error ... # mount_cd9660 /dev/worm0 /mnt mount_cd9660: Input/output error # ???? Any ideas .. I have compiled about 10 kernels, re-installed, the machine changed the SCSI ID's on the CDR, changed the sequence of the disk and the CDR etc. When I boot with a GENERIC kernel, I AM able to mount the /dev/cd0a and read the CD ?? Here follows the probe of the devices ... ..... chip2: rev 0x00 on pci0.7.1 ahc0: rev 0x00 int a irq 12 on pci0.9.0 ahc0: aic7880 Wide Channel, SCSI Id=7, 16 SCBs ahc0: waiting for scsi devices to settle scbus0 at ahc0 bus 0 Sending SDTR!! sd0 at scbus0 target 0 lun 0 sd0: type 0 fixed SCSI 2 sd0: Direct-Access 2077MB (4254819 512 byte sectors) ahc0:A:6: refuses WIDE negotiation. Using 8bit transfers ahc0:A:6: refuses synchronous negotiation. Using asynchronous transfers worm0 at scbus0 target 6 lun 0 worm0: type 5 removable SCSI 2 worm0: Write-Once vga0: rev 0x53 int a irq 10 on pci0.11.0 Probing for devices on the ISA bus: .... Thanx Reinier