From owner-freebsd-acpi@FreeBSD.ORG Sun May 30 06:08:34 2010 Return-Path: Delivered-To: freebsd-acpi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id BC66E106566C for ; Sun, 30 May 2010 06:08:34 +0000 (UTC) (envelope-from hallucinator7@hotmail.com) Received: from col0-omc1-s10.col0.hotmail.com (col0-omc1-s10.col0.hotmail.com [65.55.34.20]) by mx1.freebsd.org (Postfix) with ESMTP id 9781E8FC08 for ; Sun, 30 May 2010 06:08:34 +0000 (UTC) Received: from COL115-W17 ([65.55.34.9]) by col0-omc1-s10.col0.hotmail.com with Microsoft SMTPSVC(6.0.3790.4675); Sat, 29 May 2010 23:08:33 -0700 Message-ID: X-Originating-IP: [116.86.94.78] From: Wei Yang Tan To: Date: Sun, 30 May 2010 14:08:33 +0800 Importance: Normal In-Reply-To: References: , MIME-Version: 1.0 X-OriginalArrivalTime: 30 May 2010 06:08:33.0591 (UTC) FILETIME=[88B4F470:01CAFFBE] Content-Type: text/plain; charset="gb2312" Content-Transfer-Encoding: 8bit X-Content-Filtered-By: Mailman/MimeDel 2.1.5 Cc: freebsd-acpi@freebsd.org Subject: RE: Errors encountered when performing hibernate / suspend X-BeenThere: freebsd-acpi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: ACPI and power management development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Sun, 30 May 2010 06:08:34 -0000 > Date: Sat, 29 May 2010 21:46:34 -0700 > Subject: Re: Errors encountered when performing hibernate / suspend > From: yanefbsd@gmail.com > To: hallucinator7@hotmail.com > CC: freebsd-acpi@freebsd.org > > 2010/5/29 Wei Yang Tan : > > > >> From: hallucinator7@hotmail.com > >> To: freebsd-acpi@freebsd.org > >> Date: Thu, 13 May 2010 21:56:20 +0800 > >> Subject: Errors encountered when performing hibernate / suspend > >> > >> > >> Hi! > >> > >> > >> First, thank you very much for your help. I am very new to FreeBSD, so do bear with me for a while. Anyway, the problem is as follows: > >> > >> > >> Whenever I tried to hibernate, it will not be successful and I get the following error at my ~/.xession-error file: > >> > >> > >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer. > >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer. > >> > >> ** (xfce4-session:1124): WARNING **: xfsm-shutdown-helper.c:234: Failed to contact HAL: No back-end for your operating system > >> > >> > >> > >> When I tried to suspend, it will not be successful and I will get the error message at my ~/.xession-error file: > >> > >> > >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer. > >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer. > >> thunar-volman: No property info.capabilities on device with id /org/freedesktop/Hal/devices/usb_device_45e_83_noserial. > >> > >> > >> > >> I read the Handbook and I thought it may help by trying out the command "acpiconf -s1". Of course it is not successful and the error message ar ~/.xsession-error is: > >> > >> > >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer. > >> ** Message: xfsm-shutdown-helper.c:268: Using HAL to shutdown/reboot the computer. > >> thunar-volman: No property info.capabilities on device with id /org/freedesktop/Hal/devices/usb_device_45e_83_noserial. > >> > >> > >> > >> > >> while the following is my "dmesg" output: > >> > >> > >> Copyright (c) 1992-2009 The FreeBSD Project. > >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > >> The Regents of the University of California. All rights reserved. > >> FreeBSD is a registered trademark of The FreeBSD Foundation. > >> FreeBSD 8.0-RELEASE #0: Sat Nov 21 15:48:17 UTC 2009 > >> root@almeida.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC > >> Timecounter "i8254" frequency 1193182 Hz quality 0 > >> CPU: Intel Pentium III (996.77-MHz 686-class CPU) > >> Origin = "GenuineIntel" Id = 0x68a Stepping = 10 > >> Features=0x383fbff > >> real memory = 537395200 (512 MB) > >> avail memory = 510431232 (486 MB) > >> ACPI APIC Table: > >> ioapic0: Changing APIC ID to 8 > >> ioapic0 irqs 0-23 on motherboard > >> kbd1 at kbdmux0 > >> acpi0: on motherboard > >> acpi0: [ITHREAD] > >> acpi0: Power Button (fixed) > >> acpi0: reservation of 0, a0000 (3) failed > >> acpi0: reservation of 100000, 1ff00000 (3) failed > >> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > >> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0 > >> pcib0: port 0xcf8-0xcff on acpi0 > >> pci0: on pcib0 > >> agp0: on hostb0 > >> pcib1: at device 1.0 on pci0 > >> pci1: on pcib1 > >> vgapci0: mem 0x41000000-0x41ffffff,0x44000000-0x45ffffff irq 18 at device 0.0 on pci1 > >> pcib2: at device 30.0 on pci0 > >> pci2: on pcib2 > >> fxp0: port 0x1000-0x103f mem 0x40000000-0x40000fff irq 20 at device 8.0 on pci2 > >> miibus0: on fxp0 > >> inphy0: PHY 1 on miibus0 > >> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > >> fxp0: Ethernet address: 00:02:a5:94:97:26 > >> fxp0: [ITHREAD] > >> isab0: at device 31.0 on pci0 > >> isa0: on isab0 > >> atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2460-0x246f at device 31.1 on pci0 > >> ata0: on atapci0 > >> ata0: [ITHREAD] > >> ata1: on atapci0 > >> ata1: [ITHREAD] > >> uhci0: port 0x2440-0x245f irq 23 at device 31.4 on pci0 > >> uhci0: [ITHREAD] > >> uhci0: LegSup = 0x0030 > >> usbus0: on uhci0 > >> pcm0: port 0x2000-0x20ff,0x2400-0x243f irq 17 at device 31.5 on pci0 > >> pcm0: [ITHREAD] > >> pcm0: > >> acpi_button0: on acpi0 > >> atrtc0: port 0x70-0x71 irq 8 on acpi0 > >> atkbdc0: port 0x60,0x64 irq 1 on acpi0 > >> atkbd0: irq 1 on atkbdc0 > >> kbd0 at atkbd0 > >> atkbd0: [GIANT-LOCKED] > >> atkbd0: [ITHREAD] > >> ppc0: port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0 > >> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > >> ppc0: FIFO with 16/16/13 bytes threshold > >> ppc0: [ITHREAD] > >> ppbus0: on ppc0 > >> ppbus0: IEEE1284 device found /NIBBLE > >> ppbus0: Probing for PnP devices: > >> ppbus0: PRINTER BJL,BJRaster3,BSCC,TXT01,BJScan2 > >> plip0: on ppbus0 > >> plip0: [ITHREAD] > >> lpt0: on ppbus0 > >> lpt0: [ITHREAD] > >> lpt0: Interrupt-driven port > >> ppi0: on ppbus0 > >> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > >> uart0: [FILTER] > >> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > >> uart1: [FILTER] > >> fdc0: port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > >> fdc0: [FILTER] > >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > >> cpu0: on acpi0 > >> acpi_throttle0: on cpu0 > >> pmtimer0 on isa0 > >> orm0: at iomem 0xe0000-0xeffff pnpid ORM0000 on isa0 > >> sc0: at flags 0x100 on isa0 > >> sc0: VGA <16 virtual consoles, flags=0x300> > >> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > >> Timecounter "TSC" frequency 996770364 Hz quality 800 > >> Timecounters tick every 1.000 msec > >> usbus0: 12Mbps Full Speed USB v1.0 > >> ad0: 39205MB at ata0-master UDMA100 > >> ugen0.1: at usbus0 > >> uhub0: on usbus0 > >> acd0: CDROM at ata1-master PIO4 > >> pcm0: measured ac97 link rate at 55945 Hz > >> uhub0: 2 ports with 2 removable, self powered > >> Root mount waiting for: usbus0 > >> ugen0.2: at usbus0 > >> ums0: on usbus0 > >> ums0: 3 buttons and [XYZ] coordinates ID=0 > >> Trying to mount root from ufs:/dev/ad0s1a > >> acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 > >> acd0: FAILURE - unknown CMD (0x03) ILLEGAL REQUEST asc=0x20 ascq=0x00 > >> acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 > >> acd0: FAILURE - READ_DISK_INFO ILLEGAL REQUEST asc=0x20 ascq=0x00 > >> acpi0: AcpiEnterSleepState failed - AE_BAD_ADDRESS > >> wakeup from sleeping state (slept 00:00:03) > >> ugen0.2: at usbus0 (disconnected) > >> ums0: at uhub0, port 2, addr 2 (disconnected) > >> ugen0.2: at usbus0 > >> ums0: on usbus0 > >> ums0: 3 buttons and [XYZ] coordinates ID=0 > >> > >> > >> > >> > >> > >> The output of "sysctl hw.acpi": > >> > >> > >> hw.acpi.supported_sleep_state: S1 S3 S4 S5 > >> hw.acpi.power_button_state: S5 > >> hw.acpi.sleep_button_state: S1 > >> hw.acpi.lid_switch_state: NONE > >> hw.acpi.standby_state: S1 > >> hw.acpi.suspend_state: S3 > >> hw.acpi.sleep_delay: 1 > >> hw.acpi.s4bios: 0 > >> hw.acpi.verbose: 0 > >> hw.acpi.disable_on_reboot: 0 > >> hw.acpi.handle_reboot: 0 > >> hw.acpi.reset_video: 0 > >> hw.acpi.cpu.cx_lowest: C1 > >> > >> > >> > >> > >> > >> I am using FreeBSD 8.0 and Xfce desktop environment (Thunar is the file manager). For hardware, I am using Pentium III; Compaq Deskpro EN. > >> > >> I am not sure if all these information are sufficient; do let me know if you need more information. Once again, thank you very much for your help. > > > > Hi! Erm... just wondering, is my debug info sufficient or is the problem not an ACPI one? Also, may I know what can I do to help in solving the problem? > > Does ACPI even work on your laptop (try reading the handbook chapter: > http://www.freebsd.org/doc/handbook/acpi-debug.html )? > > HTH, > -Garrett Hi! I have managed to get hold of Linux Mint 8 LiveCD and test the Sleep feature and it works. It is using ACPI, since only ACPI is displayed on dmesg instead of APM. So I believe ACPI should work on my Compaq Deskpro desktop, am I right? Thank you for your help. WY _________________________________________________________________ Hotmail: Trusted email with Microsoft¡¯s powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969