From owner-freebsd-stable Wed Sep 25 14: 0:53 2002 Delivered-To: freebsd-stable@freebsd.org Received: from mx1.FreeBSD.org (mx1.FreeBSD.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 8C7EA37B401 for ; Wed, 25 Sep 2002 14:00:51 -0700 (PDT) Received: from relay.cigital.com (relay.cigital.com [64.80.176.5]) by mx1.FreeBSD.org (Postfix) with ESMTP id 177E743E4A for ; Wed, 25 Sep 2002 14:00:51 -0700 (PDT) (envelope-from yanek@cigital.com) Received: by relay.cigital.com (Postfix, from userid 103) id 93845BAB8; Wed, 25 Sep 2002 17:00:50 -0400 (EDT) Received: from exchange.cigital.com (exchange.cigital.com [10.1.20.3]) by relay.cigital.com (Postfix) with ESMTP id D0152BAAE; Wed, 25 Sep 2002 17:00:48 -0400 (EDT) Received: by exchange.cigital.com with Internet Mail Service (5.5.2656.59) id ; Wed, 25 Sep 2002 16:48:14 -0400 Message-ID: <51CC94132526754995E79DCF28C0C34D09BE10@exchange.cigital.com> From: Yanek Korff To: 'Juha Saarinen' Cc: "'Freebsd-Stable@freebsd.org'" Subject: RE: SCSI controller & NIC problem - irq11 Date: Wed, 25 Sep 2002 16:48:12 -0400 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2656.59) Content-Type: text/plain; charset="iso-8859-1" X-Spam-Status: No, hits=-1.6 required=5.0 tests=DOUBLE_CAPSWORD,AWL version=2.31 X-Spam-Level: Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG Not that I could tell... but I had little time this afternoon @ the co-lo. I'll take a closer look when I get back in there. -Yanek. > -----Original Message----- > From: Juha Saarinen [mailto:juha@saarinen.org] > Sent: Wednesday, September 25, 2002 17:00 > To: Yanek Korff > Cc: 'freebsd-stable@freebsd.org' > Subject: Re: SCSI controller & NIC problem - irq11 > > > On Wed, 25 Sep 2002, Yanek Korff wrote: > > > > > I'm working on a system with an Intel motherboard > (SE7500CW2SCSI) - the one > > that's being discussed in freebsd-smp right now due to SMP > problems, panic > > on boot when SMP is enabled. That's somewhat beside the > point for now... > > > > What I'd really like to do is get the integrated SCSI > controller working > > with the sym drivers. LSI chipset listed as LSI Logic* > 53C1000 on the Intel > > website. Here's a piece of the dmesg: > > > > sym0: <1010-66> port 0x7000-0x70ff mem > > 0xfc200000-0xfc201fff,0xfc202000-0xfc2023ff irq 11 at devic > > e 1.0 on pci3 > > sym0: Symbios NVRAM, ID 7, Fast-80, SE, parity checking > > sym0: open drain IRQ line driver, using on-chip SRAM > > sym0: using LOAD/STORE-based firmware. > > sym0: handling phase mismatch from SCRIPTS. > > CACHE TEST FAILED: script execution failed. > > start=7c99f4fc, pc=7c99f4fc, end=7c99f51c > > sym0: CACHE INCORRECTLY CONFIGURED. > > device_probe_and_attach: sym0 attach returned 6 > > > > There are two onboard NICs on this box and a graphics card > using irq11. > > dmesg | grep "irq 11": > > sym0: <1010-66> port 0x7000-0x70ff mem > > 0xfc200000-0xfc201fff,0xfc202000-0xfc2023ff irq 11 at > device 1.0 on pci3 > > pci4: at 3.0 irq 11 > > fxp0: port 0x8400-0x843f mem > > 0xfc300000-0xfc31ffff,0xfc341000-0xfc341fff irq 11 at > device 4.0 on pci4 > > fxp1: port 0x8440-0x847f mem > > 0xfc320000-0xfc33ffff,0xfc342000-0xfc342fff irq 11 at > device 5.0 on pci4 > > pci0: (vendor=0x8086, dev=0x2483) at 31.3 irq 11 > > > > > > Also the PCI NIC isn't showing up -at all- It's likely > also trying to use > > irq11 (it's an XL -- ah... 3com905). > > > > Any idea what's going on here? Advice? Can I manually > change the IRQs of > > any of this stuff to get things going? > > Can you manually assigning IRQs in the BIOS setup? > > -- > Juha Saarinen > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message