Date: Sun, 10 Nov 2013 09:35:40 -0800 From: Kevin Oberman <rkoberman@gmail.com> To: Danny Winn <danny.gabriel.winn@gmail.com> Cc: "freebsd-x11@freebsd.org" <freebsd-x11@freebsd.org> Subject: Re: xorg.conf: Howto ignore onboard card? Message-ID: <CAN6yY1vz%2BMaN7C2x%2BEb2LZK3HrNhHRG94kPe9z4hHMz4Kzj4Qg@mail.gmail.com> In-Reply-To: <CAK4wwDyaBP1Tv09umKE7O1zuMoWdvt9D=N2CxkuGGrp4SbK==Q@mail.gmail.com> References: <CAK4wwDyaBP1Tv09umKE7O1zuMoWdvt9D=N2CxkuGGrp4SbK==Q@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Nov 10, 2013 at 2:01 AM, Danny Winn <danny.gabriel.winn@gmail.com>wrote: > Hello List, > > I installed FreeBSD 9.2 a week ago and use my GeForce GT 610 card via > HDMI-output and driver nvidia, which supports the card. It seems like > somehow Xorg is trying to access the onboard card, even though it is not > mentioned in /etc/X11/xorg.conf. > startx does not start X. Same issue with the newest driver from Nvidia's > hompage. > > This is my configuration: > > /etc/make.conf > Code: > > WITH_NEW_XORG = YES > WITH_GALLIUM = YES > [...] > > Regards, > Danny > I'm a bit confused by this. It may or may not be your problem, but it is certainly wrong. "WITH_GALLIUM" is support for AMD graphics and is not appropriate to either Intel or nVidia graphics. And, even for AMD graphics, you also need "WITH_KMS=". I'd suggest that you build the relevant X ports with only WITH_NEW_XORG. That means: graphics/libGL graphics/dri graphics/libEGL graphics/libglesv2 X11-servers/xorg-server X11-servers/xorg-nestserver Any X11-drivers you use. (Note: You may not have all of these on your system and you don't need to add any you don't have.) -- R. Kevin Oberman, Network Engineer E-mail: rkoberman@gmail.com
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN6yY1vz%2BMaN7C2x%2BEb2LZK3HrNhHRG94kPe9z4hHMz4Kzj4Qg>