Date: Thu, 8 Mar 2018 19:30:26 +0300 From: Greg <greg@unrelenting.technology> To: Hans Petter Selasky <hps@selasky.org> Cc: ticso@cicely.de, freebsd-arm@freebsd.org, freebsd-current@freebsd.org, Bernd Walter <ticso@cicely7.cicely.de> Subject: Re: webcamd based touchscreen problem on Pi3 Message-ID: <20180308163026.z3ptrc7376smnsrt@unrelenting.technology> In-Reply-To: <818e1917-0472-c0dd-a9d6-b7532faf4d4b@selasky.org> References: <20180308161645.GF80981@cicely7.cicely.de> <818e1917-0472-c0dd-a9d6-b7532faf4d4b@selasky.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/08, Hans Petter Selasky wrote: >On 03/08/18 17:16, Bernd Walter wrote: >>Hardware is a Raspberry Pi3 with current r330034. >>I'm trying to run a USB touchscreen. >>Tested wmt and uep, but neither wants to attach, although the Waveshare >>display I'm using is likely running an egalaxy firmware. >>However webcamd accepts the device and creates a /dev/input/event0. >>But I can't get X to use it. >>xf86-input-evdev-2.10.5 is installed and it created an X config file >>under /usr/local/share/X11/xorg.conf.d/10-evdev.conf. >>I also tried some google results in /etc/X11/xorg.conf, but X never >>touches the device: > >See here: > >https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=196678 Or here: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=222609 But that's all about hotplug. It is definitely possible to manually configure the device on the stock xorg-server package. I can't say if the "google results" are correct without actually seeing them, but it should explicitly specify the /dev/input/event0 path.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20180308163026.z3ptrc7376smnsrt>