From owner-freebsd-net@FreeBSD.ORG Tue Jul 8 18:50:06 2008 Return-Path: Delivered-To: freebsd-net@hub.freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [IPv6:2001:4f8:fff6::34]) by hub.freebsd.org (Postfix) with ESMTP id 98D391065672 for ; Tue, 8 Jul 2008 18:50:06 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (freefall.freebsd.org [IPv6:2001:4f8:fff6::28]) by mx1.freebsd.org (Postfix) with ESMTP id 851778FC2D for ; Tue, 8 Jul 2008 18:50:06 +0000 (UTC) (envelope-from gnats@FreeBSD.org) Received: from freefall.freebsd.org (gnats@localhost [127.0.0.1]) by freefall.freebsd.org (8.14.2/8.14.2) with ESMTP id m68Io6RL087521 for ; Tue, 8 Jul 2008 18:50:06 GMT (envelope-from gnats@freefall.freebsd.org) Received: (from gnats@localhost) by freefall.freebsd.org (8.14.2/8.14.1/Submit) id m68Io6ev087520; Tue, 8 Jul 2008 18:50:06 GMT (envelope-from gnats) Date: Tue, 8 Jul 2008 18:50:06 GMT Message-Id: <200807081850.m68Io6ev087520@freefall.freebsd.org> To: freebsd-net@FreeBSD.org From: Francis Gendreau Cc: Subject: Re: kern/125195: verbrose dmesg from asus m3000n m3n as requested by Gavin Atkinson X-BeenThere: freebsd-net@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list Reply-To: Francis Gendreau List-Id: Networking and TCP/IP with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 08 Jul 2008 18:50:06 -0000 The following reply was made to PR kern/125195; it has been noted by GNATS. From: Francis Gendreau To: bug-followup@FreeBSD.org Cc: Subject: Re: kern/125195: verbrose dmesg from asus m3000n m3n as requested by Gavin Atkinson Date: Tue, 08 Jul 2008 11:33:22 -0400 verbose dmesg after hard power cycle: Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 1 MB, 8-way set associative, 64 byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size real memory = 527695872 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000001ee22fff, 501198848 bytes (122363 pages) avail memory = 502419456 (479 MB) Table 'FACP' at 0x1f740200 Table 'OEMB' at 0x1f750040 MADT: No MADT table found APIC: Could not find any APICs. pnpbios: Found PnP BIOS data at 0xc00f2e00 pnpbios: Entry = f0000:39da Rev = 1.0 Other BIOS signatures found: wlan_amrr: wlan: <802.11 Link Layer> firmware: 'ipw_bss' version 130: 209190 bytes loaded at 0xc0d68738 firmware: 'ipw_ibss' version 130: 201138 bytes loaded at 0xc0d9d73c firmware: 'ipw_monitor' version 130: 196458 bytes loaded at 0xc0dd0748 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 ath_rate: version 1.2 nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: mem: Pentium Pro MTRR support enabled null: random: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) ACPI: RSDP @ 0x0xf4b70/0x0014 (v 0 ACPIAM) ACPI: RSDT @ 0x0x1f740000/0x002C (v 1 A M I OEMRSDT 0x05000314 MSFT 0x00000097) ACPI: FACP @ 0x0x1f740200/0x0081 (v 2 A M I OEMFACP 0x05000314 MSFT 0x00000097) ACPI: DSDT @ 0x0x1f740300/0x7323 (v 1 0ABBD 0ABBD001 0x00000001 MSFT 0x0100000D) ACPI: FACS @ 0x0x1f750000/0x0040 ACPI: OEMB @ 0x0x1f750040/0x004D (v 1 A M I OEMBIOS 0x05000314 MSFT 0x00000097) npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: No call entry point AcpiOsDerivePciId: \\_SB_.PCI0.P0P1.CBS0.CBSP -> bus 1 dev 5 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xccd3f000 pa 0x1000 atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IROR -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1f700000 (3) failed ACPI timer: 1/1 1/1 1/0 1/1 1/1 1/1 1/0 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 12 Validation 0 11 N 0 3 4 5 6 7 11 12 After Disable 0 255 N 0 3 4 5 6 7 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 11 12 Validation 0 255 N 0 3 4 5 6 7 11 12 After Disable 0 255 N 0 3 4 5 6 7 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 12 Validation 0 4 N 0 4 12 After Disable 0 255 N 0 4 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 6 Validation 0 5 N 0 5 6 After Disable 0 255 N 0 5 6 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 6 11 Validation 0 11 N 0 6 11 After Disable 0 255 N 0 6 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 7 Validation 0 255 N 0 3 7 After Disable 0 255 N 0 3 7 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 Validation 0 255 N 0 4 7 After Disable 0 255 N 0 4 7 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 6 12 Validation 0 4 N 0 4 6 12 After Disable 0 255 N 0 4 6 12 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 p4tcc0: on cpu0 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.2.INTA at func 0: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 255 ACPI: Found matching pin for 0.31.INTB at func 6: 255 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 5 ACPI: Found matching pin for 0.29.INTC at func 2: 4 ACPI: Found matching pin for 0.29.INTD at func 7: 4 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 domain=0, bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 domain=0, bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled map[14]: type Memory, range 32, base 0xffa80000, size 19, enabled map[18]: type I/O Port, range 32, base 0xdc00, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled map[14]: type Memory, range 32, base 0xff980000, size 19, enabled found-> vendor=0x8086, dev=0x24c2, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c4, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 5 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c7, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=4 map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 4 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xffa7fc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 4 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x83 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=0x8086, dev=0x24c5, revid=0x03 domain=0, bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled map[14]: type I/O Port, range 32, base 0xe100, size 6, enabled map[18]: type Memory, range 32, base 0, size 9, memory disabled map[1c]: type Memory, range 32, base 0, size 8, memory disabled found-> vendor=0x8086, dev=0x24c6, revid=0x03 domain=0, bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe200, size 8, enabled map[14]: type I/O Port, range 32, base 0xe300, size 7, enabled pci0: at device 0.1 (no driver attached) pci0: at device 0.3 (no driver attached) vgapci0: port 0xdc00-0xdc07 mem 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 11 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000 vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xffa80000 agp0: detected 8060k stolen memory agp0: aperture size is 128M vgapci1: mem 0xe8000000-0xefffffff,0xff980000-0xff9fffff at device 2.1 on pci0 uhci0: port 0xd480-0xd49f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd800-0xd81f irq 5 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd880-0xd89f irq 4 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xffa7fc00-0xffa7ffff irq 4 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xffa7fc00 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pcib1: at device 30.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xff700000-0xff7fffff pcib1: prefetched decode 0xdea00000-0xdeafffff pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 1.8.INTA at func 0: 11 ACPI: Found matching pin for 1.5.INTA at func 0: 255 ACPI: Found matching pin for 1.5.INTB at func 1: 11 ACPI: Found matching pin for 1.4.INTA at func 0: 4 pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x1043, revid=0x04 domain=0, bus=1, slot=4, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff7fd000, size 12, enabled pcib1: requested memory range 0xff7fd000-0xff7fdfff: good pcib1: matched entry for 1.4.INTA (src \\_SB_.LNKC:0) pcib1: slot 4 INTA routed to irq 4 via \\_SB_.LNKC found-> vendor=0x1180, dev=0x0475, revid=0xb8 domain=0, bus=1, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, enabled found-> vendor=0x1180, dev=0x0551, revid=0x00 domain=0, bus=1, slot=5, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff7fe800, size 11, enabled pcib1: requested memory range 0xff7fe800-0xff7fefff: good pcib1: matched entry for 1.5.INTB (src \\_SB_.LNKA:0) pcib1: slot 5 INTB routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x103e, revid=0x83 domain=0, bus=1, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xff7ff000, size 12, enabled pcib1: requested memory range 0xff7ff000-0xff7fffff: good map[14]: type I/O Port, range 32, base 0xcc00, size 6, enabled pcib1: requested I/O range 0xcc00-0xcc3f: in range pcib1: matched entry for 1.8.INTA (src \\_SB_.LNKE:0) pcib1: slot 8 INTA routed to irq 11 via \\_SB_.LNKE ipw0: mem 0xff7fd000-0xff7fdfff irq 4 at device 4.0 on pci1 ipw0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff7fd000 ipw0: bpf attached ipw0: Ethernet address: 00:04:23:71:77:46 ipw0: bpf attached ipw0: bpf attached ipw0: [MPSAFE] ipw0: [ITHREAD] ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps cbb0: at device 5.0 on pci1 pcib1: cbb0 requested memory range 0xff700000-0xff7fffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xff700000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 1.5.INTA (src \\_SB_.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib1: slot 5 INTA routed to irq 9 via \\_SB_.LNKB cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x04751180 0x02100007 0x060700b8 0x00822000 0x10: 0xff700000 0x020000dc 0x20030201 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000109 0x40: 0x17441043 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x20a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x80000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x17441043 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: mem 0xff7fe800-0xff7fefff irq 11 at device 5.1 on pci1 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xff7fe800 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:10:02:07 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:10:02:07 fwe0: bpf attached fwe0: Ethernet address: 02:e0:18:10:02:07 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:e0:18:00:03:10:02:07 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1374000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode fxp0: port 0xcc00-0xcc3f mem 0xff7ff000-0xff7fffff irq 11 at device 8.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff7ff000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 103e 1043 1745 0083 fxp0: Dynamic Standby mode is disabled fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: MII without any PHY! device_attach: fxp0 attach returned 6 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f ata1: reset tp2 stat0=10 stat1=00 devices=0x4 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0 pcm0: Lazy allocation of 0x200 bytes rid 0x18 type 3 at 0x80000000 pcm0: Lazy allocation of 0x100 bytes rid 0x1c type 3 at 0x80000200 pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1620000, 4000; 0xd4d6f000 -> 1620000 pcm0: sndbuf_setmap 162c000, 4000; 0xd4d73000 -> 162c000 pci0: at device 31.6 (no driver attached) acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 600024956 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire acpi_acad0: acline initialization start ad0: setting PIO4 on ICH4 chip ad0: setting UDMA100 on ICH4 chip battery0: battery initialization start battery1: battery initialization start system power profile changed to 'economy' ad0: 38154MB at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization done, tried 1 times ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH4 chip acd0: setting UDMA33 on ICH4 chip acd0: DVDROM drive at ata1 as master acd0: read 4125KB/s (4125KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48017 Hz, will use 48000 Hz acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID loade(cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present d (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init drm0: on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm1: on vgapci1 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [MPSAFE] drm0: [ITHREAD] drm0: [MPSAFE] drm0: [ITHREAD] Waiting (max 60 seconds) for system process `vnlru' to stop...done Waiting (max 60 seconds) for system process `bufdaemon' to stop...done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining...0 0 0 done All buffers synced. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008 root@logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e72000. Preloaded elf module "/boot/kernel/if_ipw.ko" at 0xc0e7214c. Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0e721f8. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0e722a4. Preloaded elf module "/boot/kernel/ipw_bss.ko" at 0xc0e72350. Preloaded elf module "/boot/kernel/ipw_ibss.ko" at 0xc0e723fc. Preloaded elf module "/boot/kernel/ipw_monitor.ko" at 0xc0e724ac. Preloaded elf module "/boot/kernel/atapicam.ko" at 0xc0e7255c. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e7260c. Calibrating clock(s) ... i8254 clock: 1193167 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 600023372 Hz CPU: Intel(R) Pentium(R) M processor 1400MHz (600.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9fbbf Features2=0x180 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries Data TLB: 4 KB Pages, 4-way set associative, 128 entries Instruction TLB: 4 MB pages, fully associative, 2 entries 2nd-level cache: 1 MB, 8-way set associative, 64 byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size Data TLB: 4 MB Pages, 4-way set associative, 8 entries 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size real memory = 527695872 (503 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001028000 - 0x000000001ee22fff, 501198848 bytes (122363 pages) avail memory = 502419456 (479 MB) Table 'FACP' at 0x1f740200 Table 'OEMB' at 0x1f750040 MADT: No MADT table found APIC: Could not find any APICs. pnpbios: Found PnP BIOS data at 0xc00f2e00 pnpbios: Entry = f0000:39da Rev = 1.0 Other BIOS signatures found: wlan_amrr: wlan: <802.11 Link Layer> firmware: 'ipw_bss' version 130: 209190 bytes loaded at 0xc0d68738 firmware: 'ipw_ibss' version 130: 201138 bytes loaded at 0xc0d9d73c firmware: 'ipw_monitor' version 130: 196458 bytes loaded at 0xc0dd0748 snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024] feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 ath_rate: version 1.2 nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 io: mem: Pentium Pro MTRR support enabled null: random: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27) ACPI: RSDP @ 0x0xf4b70/0x0014 (v 0 ACPIAM) ACPI: RSDT @ 0x0x1f740000/0x002C (v 1 A M I OEMRSDT 0x05000314 MSFT 0x00000097) ACPI: FACP @ 0x0x1f740200/0x0081 (v 2 A M I OEMFACP 0x05000314 MSFT 0x00000097) ACPI: DSDT @ 0x0x1f740300/0x7323 (v 1 0ABBD 0ABBD001 0x00000001 MSFT 0x0100000D) ACPI: FACS @ 0x0x1f750000/0x0040 ACPI: OEMB @ 0x0x1f750040/0x004D (v 1 A M I OEMBIOS 0x05000314 MSFT 0x00000097) npx0: INT 16 interface acpi0: on motherboard acpi0: [MPSAFE] acpi0: [ITHREAD] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086) pcibios: No call entry point AcpiOsDerivePciId: \\_SB_.PCI0.P0P1.CBS0.CBSP -> bus 1 dev 5 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xccd3f000 pa 0x1000 atpic: Programming IRQ9 as level/low AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IROR -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 1f700000 (3) failed ACPI timer: 1/0 1/0 1/1 1/1 1/0 1/0 1/1 1/1 1/1 1/0 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_ec0: port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 11 12 Validation 0 11 N 0 3 4 5 6 7 11 12 After Disable 0 255 N 0 3 4 5 6 7 11 12 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 11 12 Validation 0 255 N 0 3 4 5 6 7 11 12 After Disable 0 255 N 0 3 4 5 6 7 11 12 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 12 Validation 0 4 N 0 4 12 After Disable 0 255 N 0 4 12 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 5 6 Validation 0 5 N 0 5 6 After Disable 0 255 N 0 5 6 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 6 11 Validation 0 11 N 0 6 11 After Disable 0 255 N 0 6 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 7 Validation 0 255 N 0 3 7 After Disable 0 255 N 0 3 7 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 7 Validation 0 255 N 0 4 7 After Disable 0 255 N 0 4 7 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 6 12 Validation 0 4 N 0 4 6 12 After Disable 0 255 N 0 4 6 12 cpu0: on acpi0 cpu0: switching to generic Cx mode est0: on cpu0 p4tcc0: on cpu0 pcib0: port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.2.INTA at func 0: 11 ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 5: 255 ACPI: Found matching pin for 0.31.INTB at func 6: 255 ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 5 ACPI: Found matching pin for 0.29.INTC at func 2: 4 ACPI: Found matching pin for 0.29.INTD at func 7: 4 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x3580, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3584, revid=0x02 domain=0, bus=0, slot=0, func=1 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3585, revid=0x02 domain=0, bus=0, slot=0, func=3 class=08-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xf0000000, size 27, enabled map[14]: type Memory, range 32, base 0xffa80000, size 19, enabled map[18]: type I/O Port, range 32, base 0xdc00, size 3, enabled pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0) pcib0: slot 2 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x3582, revid=0x02 domain=0, bus=0, slot=2, func=1 class=03-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D3 current D0 map[10]: type Prefetchable Memory, range 32, base 0xe8000000, size 27, enabled map[14]: type Memory, range 32, base 0xff980000, size 19, enabled found-> vendor=0x8086, dev=0x24c2, revid=0x03 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x24c4, revid=0x03 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.LNKD:0) pcib0: slot 29 INTB routed to irq 5 via \\_SB_.LNKD found-> vendor=0x8086, dev=0x24c7, revid=0x03 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=4 map[20]: type I/O Port, range 32, base 0xd880, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.LNKC:0) pcib0: slot 29 INTC routed to irq 4 via \\_SB_.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x03 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xffa7fc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.LNKH:0) pcib0: slot 29 INTD routed to irq 4 via \\_SB_.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x83 domain=0, bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x03 domain=0, bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled map[24]: type Memory, range 32, base 0, size 10, memory disabled found-> vendor=0x8086, dev=0x24c5, revid=0x03 domain=0, bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe000, size 8, enabled map[14]: type I/O Port, range 32, base 0xe100, size 6, enabled map[18]: type Memory, range 32, base 0, size 9, memory disabled map[1c]: type Memory, range 32, base 0, size 8, memory disabled found-> vendor=0x8086, dev=0x24c6, revid=0x03 domain=0, bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=255 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe200, size 8, enabled map[14]: type I/O Port, range 32, base 0xe300, size 7, enabled pci0: at device 0.1 (no driver attached) pci0: at device 0.3 (no driver attached) vgapci0: port 0xdc00-0xdc07 mem 0xf0000000-0xf7ffffff,0xffa80000-0xffafffff irq 11 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xf0000000 vgapci0: Reserved 0x80000 bytes for rid 0x14 type 3 at 0xffa80000 agp0: detected 8060k stolen memory agp0: aperture size is 128M vgapci1: mem 0xe8000000-0xefffffff,0xff980000-0xff9fffff at device 2.1 on pci0 uhci0: port 0xd480-0xd49f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd800-0xd81f irq 5 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd880-0xd89f irq 4 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered ehci0: mem 0xffa7fc00-0xffa7ffff irq 4 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xffa7fc00 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: on ehci0 usb3: USB revision 2.0 uhub3: on usb3 uhub3: 6 ports with 6 removable, self powered pcib1: at device 30.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xff700000-0xff7fffff pcib1: prefetched decode 0xdea00000-0xdeafffff pcib1: Subtractively decoded bridge. ACPI: Found matching pin for 1.8.INTA at func 0: 11 ACPI: Found matching pin for 1.5.INTA at func 0: 255 ACPI: Found matching pin for 1.5.INTB at func 1: 11 ACPI: Found matching pin for 1.4.INTA at func 0: 4 pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x8086, dev=0x1043, revid=0x04 domain=0, bus=1, slot=4, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=4 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff7fd000, size 12, enabled pcib1: requested memory range 0xff7fd000-0xff7fdfff: good pcib1: matched entry for 1.4.INTA (src \\_SB_.LNKC:0) pcib1: slot 4 INTA routed to irq 4 via \\_SB_.LNKC found-> vendor=0x1180, dev=0x0475, revid=0xb8 domain=0, bus=1, slot=5, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0, size 12, enabled found-> vendor=0x1180, dev=0x0551, revid=0x00 domain=0, bus=1, slot=5, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xff7fe800, size 11, enabled pcib1: requested memory range 0xff7fe800-0xff7fefff: good pcib1: matched entry for 1.5.INTB (src \\_SB_.LNKA:0) pcib1: slot 5 INTB routed to irq 11 via \\_SB_.LNKA found-> vendor=0x8086, dev=0x103e, revid=0x83 domain=0, bus=1, slot=8, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xff7ff000, size 12, enabled pcib1: requested memory range 0xff7ff000-0xff7fffff: good map[14]: type I/O Port, range 32, base 0xcc00, size 6, enabled pcib1: requested I/O range 0xcc00-0xcc3f: in range pcib1: matched entry for 1.8.INTA (src \\_SB_.LNKE:0) pcib1: slot 8 INTA routed to irq 11 via \\_SB_.LNKE ipw0: mem 0xff7fd000-0xff7fdfff irq 4 at device 4.0 on pci1 ipw0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff7fd000 ipw0: bpf attached ipw0: Ethernet address: 00:04:23:71:77:46 ipw0: bpf attached ipw0: bpf attached ipw0: [MPSAFE] ipw0: [ITHREAD] ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps cbb0: at device 5.0 on pci1 pcib1: cbb0 requested memory range 0xff700000-0xff7fffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xff700000 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib1: matched entry for 1.5.INTA (src \\_SB_.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib1: slot 5 INTA routed to irq 9 via \\_SB_.LNKB cbb0: [MPSAFE] cbb0: [ITHREAD] cbb0: PCI Configuration space: 0x00: 0x04751180 0x02100007 0x060700b8 0x00822000 0x10: 0xff700000 0x020000dc 0x20030201 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x07000109 0x40: 0x17441043 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x20a00001 0x00000000 0x04630463 0x00000000 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 0xa0: 0x80000000 0x00000000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x17441043 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: mem 0xff7fe800-0xff7fefff irq 11 at device 5.1 on pci1 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xff7fe800 fwohci0: [MPSAFE] fwohci0: [FILTER] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:e0:18:00:03:10:02:07 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:10:02:07 fwe0: bpf attached fwe0: Ethernet address: 02:e0:18:10:02:07 fwip0: on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:e0:18:00:03:10:02:07 @ 0xfffe00000000, S400, maxrec 2048 sbp0: on firewire0 dcons_crom0: on firewire0 dcons_crom0: bus_addr 0x1374000 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode fxp0: port 0xcc00-0xcc3f mem 0xff7ff000-0xff7fffff irq 11 at device 8.0 on pci1 fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xff7ff000 fxp0: using memory space register mapping fxp0: PCI IDs: 8086 103e 1043 1745 0083 fxp0: Dynamic Standby mode is disabled fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: fxp_miibus_readreg: timed out fxp0: MII without any PHY! device_attach: fxp0 attach returned 6 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x90 err=0x90 lsb=0x90 msb=0x90 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1 ata0: [MPSAFE] ata0: [ITHREAD] ata1: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x7f msb=0x7f ata1: reset tp2 stat0=10 stat1=00 devices=0x4 ata1: [MPSAFE] ata1: [ITHREAD] pcm0: port 0xe000-0xe0ff,0xe100-0xe13f at device 31.5 on pci0 pcm0: Lazy allocation of 0x200 bytes rid 0x18 type 3 at 0x80000000 pcm0: Lazy allocation of 0x100 bytes rid 0x1c type 3 at 0x80000200 pcib0: matched entry for 0.31.INTB (src \\_SB_.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.LNKB pcm0: [MPSAFE] pcm0: [ITHREAD] pcm0: pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: ac97 codec dac ready count: 0 pcm0: Mixer "vol": pcm0: Mixer "pcm": pcm0: Mixer "speaker": pcm0: Mixer "line": pcm0: Mixer "mic": pcm0: Mixer "cd": pcm0: Mixer "rec": pcm0: Mixer "igain": pcm0: Mixer "ogain": pcm0: Mixer "line1": pcm0: Mixer "phin": pcm0: Mixer "phout": pcm0: Mixer "video": pcm0: clone manager: deadline=750ms flags=0x8000001e pcm0: sndbuf_setmap 1620000, 4000; 0xd4d6f000 -> 1620000 pcm0: sndbuf_setmap 162c000, 4000; 0xd4d73000 -> 162c000 pci0: at device 31.6 (no driver attached) acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_tz0: on acpi0 acpi_acad0: on acpi0 battery0: on acpi0 battery1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: irq 12 on acpi0 psm0: current command byte:0065 psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: configured irq 3 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0 port 0x2f8-0x2ff irq 3 drq 1 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: at iomem 0xc0000-0xccfff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 600023372 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attachedfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) hptrr: no controller detected. acpi_acad0: acline initialization start battery0: battery initialization start battery1: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire system power profile changed to 'economy' ad0: setting PIO4 on ICH4 chip acpi_acad0: Off Line acpi_acad0: acline initialization done, tried 1 times ad0: setting UDMA100 on ICH4 chip ad0: 38154MB at ata0-master UDMA100 ad0: 78140160 sectors [77520C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 battery0: battery initialization done, tried 1 times ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on ICH4 chip acd0: setting UDMA33 on ICH4 chip acd0: DVDROM drive at ata1 as master acd0: read 4125KB/s (4125KB/s), 512KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48008 Hz, will use 48000 Hz acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe0:ata1:0:0:0): Down reving Protocol Version from 2 to 0? (probe0:ata1:0:0:0): error 6 (probe0:ata1:0:0:0): Unretryable Error acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 (probe0:ata1:0:0:0): error 22 (probe0:ata1:0:0:0): Unretryable Error (probe1:sbp0:0:0:0): error 22 (probe1:sbp0:0:0:0): Unretryable Error (probe2:sbp0:0:1:0): error 22 (probe2:sbp0:0:1:0): Unretryable Error (probe3:sbp0:0:2:0): error 22 (probe3:sbp0:0:2:0): Unretryable Error (probe4:sbp0:0:3:0): error 22 (probe4:sbp0:0:3:0): Unretryable Error (probe5:sbp0:0:4:0): error 22 (probe5:sbp0:0:4:0): Unretryable Error (probe6:sbp0:0:5:0): error 22 (probe6:sbp0:0:5:0): Unretryable Error (probe7:sbp0:0:6:0): error 22 (probe7:sbp0:0:6:0): Unretryable Error pass0 at ata1 bus 0 target 0 lun 0 pass0: Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers GEOM: new disk cd0 ATA PseudoRAID load(cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ed (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error (cd0:ata1:0:0:0): error 6 (cd0:ata1:0:0:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s1a start_init: trying /sbin/init drm0: on vgapci0 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm1: on vgapci1 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized i915 1.5.0 20060119 drm0: [MPSAFE] drm0: [ITHREAD] battery1: battery initialization failed, giving up umass0: on uhub3 umass0:3:0:-1: Attached to scbus3 (probe0:umass-sim0:0:0:0): error 22 (probe0:umass-sim0:0:0:0): Unretryable Error pass1 at umass-sim0 bus 0 target 0 lun 0 pass1: < > Removable Direct Access SCSI-2 device pass1: 40.000MB/s transfers GEOM: new disk da0 da0 at umass-sim0 bus 0 target 0 lun 0 da0: < > Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: 3102MB (6354432 512 byte sectors: 255H 63S/T 395C) GEOM_LABEL: Label for provider da0s1a is ufs/usbdrive.