Date: Sat, 2 Mar 2002 21:18:08 -0500 (EST) From: Kenneth Wayne Culver <culverk@wam.umd.edu> To: "Kenneth D. Merry" <ken@kdm.org> Cc: freebsd-questions@FreeBSD.ORG, freebsd-scsi@FreeBSD.ORG Subject: Re: scsi problems Message-ID: <Pine.GSO.4.21.0203022115050.5738-100000@rac1.wam.umd.edu> In-Reply-To: <20020302172825.A98467@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> - what kind of card is it?
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xf800-0xf8ff mem
0xfedfb000-0xfedfbfff irq 16 at device 9.0 on pci0
aic7895: Ultra Wide Channel A, SCSI Id=7, 32/255 SCBs
> - what kinds of devices are they?
IBM DCAS-34330W S65A
The two hard drives are this same type.
> - is your bus terminated properly?
yes it is as far as I know. When I hit ctrl-a for the scsi setup before
FreeBSD boots, it sees both drives, and I can verify them and low-level
format them both.
> - do the devices have unique IDs?
one drive is id 0 and the other is id 6
> - send dmesg information.
here is my dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-20020302-CURRENT #0: Sat Mar 2 18:55:29 EST 2002
culverk@alpha.yumyumyum.org:/usr/src/sys/i386/compile/MYKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0342000.
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (333.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134217728 (131072K bytes)
avail memory = 127111168 (124132K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443LX (440 LX) host to PCI bridge> at pcibus 0 on
motherboard
IOAPIC #0 intpin 19 -> irq 2
IOAPIC #0 intpin 17 -> irq 16
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcb0-0xfcbf at device 2.1
on pci0ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at device 2.2 (no driver attached)
Timecounter "PIIX" frequency 3579545 Hz
pci0: <bridge, PCI-unknown> at device 2.3 (no driver attached)
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfcc0-0xfcdf mem
0xfeb00000-0xfebfffff,0xfedf9000-0xfedf9fff irq 2 at device 3.0 on pci0
fxp0: Ethernet address 00:a0:c9:82:e2:b8
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 100baseT4, auto
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0xf800-0xf8ff mem
0xfedfb000-0xfedfbfff irq 16 at device 9.0 on pci0
aic7895: Ultra Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7895 Ultra SCSI adapter> port 0xf400-0xf4ff mem
0xfedfa000-0xfedfafff irq 16 at device 9.1 on pci0
aic7895: Ultra Wide Channel B, SCSI Id=7, 32/255 SCBs
pci0: <display, VGA> at device 13.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 15.0 on pci0
IOAPIC #0 intpin 16 -> irq 17
pci2: <PCI bus> on pcib2
de0: <Digital 21140A Fast Ethernet> port 0xec00-0xec7f mem
0xfdfff800-0xfdfff87f irq 2 at device 4.0 on pci2
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:c0:8f:e5:f9
de1: <Digital 21140A Fast Ethernet> port 0xe880-0xe8ff mem
0xfdfff400-0xfdfff47f irq 17 at device 5.0 on pci2
de1: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de1: address 00:00:c0:8e:e5:f9
orm0: <Option ROMs> at iomem
0xe4000-0xeffff,0xe0000-0xe3fff,0xc8000-0xccfff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding
disabled, default to accept, logging disabled
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
ad0: 8063MB <Maxtor 90845D4> [16383/16/63] at ata0-master UDMA33
Waiting 20 seconds for SCSI devices to settle
de1: enabling Full Duplex 100baseTX port
de0: autosense failed: cable problem?
Mounting root from ufs:/dev/ad0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
SMP: AP CPU #1 Launched!
Thanks,
Ken
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.GSO.4.21.0203022115050.5738-100000>