Date: Sun, 15 Aug 2010 20:44:37 +0200 From: "C. P. Ghost" <cpghost@cordula.ws> To: sg <obsidian69@idnet.com> Cc: freebsd-questions@freebsd.org Subject: Re: Realtek 811c LAN driver avail. on FreeBSD 8.1 Message-ID: <AANLkTikCeJmP4sjpTXFYexCEv5D0WuEU_9_TWYT6YAbE@mail.gmail.com> In-Reply-To: <4C6824DD.1010409@idnet.com> References: <4C6824DD.1010409@idnet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Aug 15, 2010 at 7:33 PM, sg <obsidian69@idnet.com> wrote: > =A0I cannot see this listed in the H/W compat. list but I had heard it is= n't > always up to date so thought I'd ask. > > Want to build a NAS using FreeBSD/ZFS/Raid-Z on Gigabyte MA-785GT-UD3H ba= se > but it uses Realtek 8111c Gige LAN H/W. Using an on-board RealTek 8111C on an MSI K9A2GM-FIH motherboard here without problems: dmesg reports: re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci2 re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto and pciconf -lv: re0@pci0:2:0:0: class=3D0x020000 card=3D0x501c1462 chip=3D0x816810ec rev=3D= 0x02 hdr=3D0x00 vendor =3D 'Realtek Semiconductor' device =3D 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)' class =3D network subclass =3D ethernet ifconfig re0's options: re0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1460 options=3D389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,= WOL_MCAST,WOL_MAGIC> > Sean Gillings -cpghost. --=20 Cordula's Web. http://www.cordula.ws/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTikCeJmP4sjpTXFYexCEv5D0WuEU_9_TWYT6YAbE>