Date: Wed, 23 Mar 2005 23:42:18 +0100 From: Torfinn Ingolfsen <torfinn.ingolfsen@broadpark.no> To: freebsd-stable@freebsd.org Subject: Re: amd64 and FreeBSD 5.4-BETA1 Message-ID: <20050323234218.48716838.torfinn.ingolfsen@broadpark.no> In-Reply-To: <0cf4b399dd1e0351c7c28d1ae6e90f6d@khera.org> References: <20050322213725.79f466fe.torfinn.ingolfsen@broadpark.no> <0cf4b399dd1e0351c7c28d1ae6e90f6d@khera.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
On Wed, 23 Mar 2005 14:34:36 -0500
Vivek Khera <vivek@khera.org> wrote:
> If you have the option of ACPI 2.0 support, enable that -- often the
As I wrote earlier, I don't have hat option in the bios. But after
re-reading the acpi debugging chapter in the handbook, I found a
workaround. With the line:
hint.apic.0.disabled="1"
in /boot/loader.conf, the machine hangs for a while (perhaps 15
seconds), and then continues the boot. Now acpi works, and even the
mouse works (along with usb and firewire ports).
The dmesg.boot output is attached. As you can see, acpi now works.
BTW, to all the people responsible; the Handbook is a great resource,
and it is getting better almost every time I read it. Thanks!
--
Regards,
Torfinn Ingolfsen,
Norway
[-- Attachment #2 --]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-BETA1 #0: Sat Mar 19 21:45:36 UTC 2005
root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1790.84-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x10ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory = 468647936 (446 MB)
avail memory = 441032704 (420 MB)
acpi0: <RS480 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0xfa00-0xfa0f,0xfb00-0xfb03,0xfc00-0xfc07,0xfd00-0xfd03,0xfe00-0xfe07 irq 11 at device 17.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port 0xf500-0xf50f,0xf600-0xf603,0xf700-0xf707,0xf800-0xf803,0xf900-0xf907 irq 10 at device 18.0 on pci0
ata4: channel #0 on atapci1
ata5: channel #1 on atapci1
ohci0: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 10 at device 19.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 10 at device 19.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ums0: Wireless Mouse Wireless Mouse, rev 1.10/1.01, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <GENERIC ATA controller> port 0xf300-0xf30f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 20.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xdf00-0xdfff mem 0xfdcff000-0xfdcff0ff irq 5 at device 3.0 on pci2
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:11:09:f6:dc:02
fwohci0: <VIA Fire II (VT6306)> port 0xde00-0xde7f mem 0xfdcfe000-0xfdcfe7ff irq 11 at device 4.0 on pci2
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:10:dc:00:00:93:dd:14
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:10:dc:93:dd:14
fwe0: Ethernet address: 02:10:dc:93:dd:14
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <multimedia, audio> at device 20.5 (no driver attached)
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1790835795 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <ST3120026A/8.01> [232581/16/63] at ata0-master UDMA33
acd0: CDROM <SAMSUNG CD-ROM SC-148F/PS05> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20050323234218.48716838.torfinn.ingolfsen>