Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 23 Aug 1995 19:12:41 -0700
From:      ronf1@ix.netcom.com (Ron Feigen)
To:        support@cdrom.com
Cc:        questions@freebsd.org
Subject:   HELP!!! Critical FTP Network Install Problem
Message-ID:  <199508240212.TAA18984@ix7.ix.netcom.com>

next in thread | raw e-mail | index | archive | help
 
>HELP.  I am helping out a Prof at ASU and we need to get this system up ASAP
>as classes started Monday.
>
>ASU bought a Dell Optipex 590 with 32meg of RAM, 514meg EIDE H/D, ATAPI CD,
>and a thin net (BNC) network adapter (I started with a 3com 3c509b and just
>tried an Intel Etherexpress (BNC/AUI combo). I am using FreeBSD 2.0.5 from
Walnut
>Creek but I am not usiong the CROM for install as a) ASU's CDROM is an
ATAPI and
> b) Network support is required anyway so I might as well get it working
now >during the install process.
>
>The 3com card required a bit of coaxing during boot to get it to respond 
>when probed.  I need to disable other devices at 0x300.  The intel card
>seems a bit better.  However it did switch itself from having mapped memory
>to no mapped memory during a reboot.  But when configured as FreeeBSD expects
>(0x300, irq 10, mapped mem @ d000) it is recognized no problem.  BTW how much 
>memory should be mapped at d000 I had a choice of 16K or 32K (or no mapped 
>memory)?
>
>The problem is that after I selected FTP for my media and fill out the net 
>config info
>I get a message about not being able to resolve the hostname and asked to 
>check my
>gateway/nameserver info.
>
>We installed a DOS based TCP/IP stack and ran netscape with the same setup
>H/W so I know the H/W is good.  I asked two sys admins to double check
>my configuration info and it checked out.
>
>So what could be my problem?  Is there a problem with Dell Optiplex chipsets?
>Is there a prefered FreeBSD network card?  
>
>Any info will be greatly appreciated, I am starting to PANIC.
>
>Thanks in advance,
>
>Ron Feigen
>ronf1@ix.netcom.com
>ron_feigen@email.mot.com
>
> 
>
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199508240212.TAA18984>