Date: Mon, 08 Sep 1997 21:06:44 -0600 From: "Justin T. Gibbs" <gibbs@plutotech.com> To: "Steven N. Hirsch" <shirsch@ibm.net> Cc: adaptec drivers <aic7xxx@FreeBSD.ORG> Subject: Re: aic Driver problems Message-ID: <199709090310.VAA01496@pluto.plutotech.com> In-Reply-To: Your message of "Mon, 08 Sep 1997 20:48:19 EDT." <Pine.LNX.3.95.970908071936.197A-100000@air.steve.net>
next in thread | previous in thread | raw e-mail | index | archive | help
>Doug and Dan, ... >Next, I reverted back to the 2.0.31-pre9 driver (with the one-line fix >that Dan suggested). The one-liner seems to have eliminated the kernel >protection fault, but after scanning (successfully!) Chan. A of the >controller, it cycles endlessly through the exact message above, with the >addition of some debugging information: > >scsi0:0:1 Aborting SCB0, flags 0x401 > >Abort reset flags 0x401 > >while idle, LASTPHASE=0x1 > SCSISIGI=0xfa > SEQADR=0x5 > SSTAT0=0x5 > SSTAT1=0x0 Almost sounds like the Linux driver isn't downloading TWIN support in the sequencer download routine. -- Justin T. Gibbs =========================================== FreeBSD: Turning PCs into workstations ===========================================
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199709090310.VAA01496>