Date: Thu, 15 Nov 2018 15:05:09 -0800 From: Dennis Glatting <freebsd@pki2.com> To: freebsd-questions@freebsd.org Subject: FreeBSD 12 Beta 4 - Still experiencing boot mount problems Message-ID: <b5310c6076ac273971b64f1e3e7a83bc4bbb7fa0.camel@pki2.com>
next in thread | raw e-mail | index | archive | help
I am still having the problem under BETA4 of unsuccessful booting
because the root cannot be found. I did not have this problem until I
upgraded from 11.2 to BETA4. I am also experiencing spurious resets but
that may be another problem although it didn't happen under 11.2.
root@btw# uname -a
FreeBSD btw 12.0-BETA4 FreeBSD 12.0-BETA4 r340461 BTW amd64
root@btw# cat /etc/fstab
# Device Mountpoint FStype Options Dump
Pass#
/dev/da0p3 / ufs rw 1
1
/dev/gpt/swap0 none swap sw 0
0
#/dev/gpt/swap1 none swap sw 0
0
#/dev/cd0 /cdrom cd9660 ro,noauto 0
0
/dev/gpt/disk1 /Junk ufs rw 3
3
tmpfs /tmp tmpfs rw,size=8G,mode=1777
0 0
linproc /usr/compat/linux/proc linprocfs rw 0 0
root@btw# dmesg
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-BETA4 r340461 BTW amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on
LLVM 6.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (2400.05-MHz K8-class
CPU)
Origin="GenuineIntel" Id=0x306f2 Family=0x6 Model=0x3f Stepping=2
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x7ffefbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SS
SE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,T
SCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
AMD Features2=0x21<LAHF,ABM>
Structured Extended
Features=0x37ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,NFP
USG>
XSAVE Features=0x1<XSAVEOPT>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID,VID,PostIntr
TSC: P-state invariant, performance statistics
real memory = 137434759168 (131068 MB)
avail memory = 133707231232 (127513 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 24 CPUs
FreeBSD/SMP: 2 package(s) x 6 core(s) x 2 hardware threads
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
Launching APs: 1 5 20 23 11 13 15 22 9 10 19 2 3 8 17 14 7 18 21 4 6 16
12
Timecounter "TSC-low" frequency 1200026016 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8111d690, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SUPERM SMCI--MB> on motherboard
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 340
Event timer "HPET2" frequency 14318180 Hz quality 340
Event timer "HPET3" frequency 14318180 Hz quality 340
Event timer "HPET4" frequency 14318180 Hz quality 340
Event timer "HPET5" frequency 14318180 Hz quality 340
Event timer "HPET6" frequency 14318180 Hz quality 340
Event timer "HPET7" frequency 14318180 Hz quality 340
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <dasp, performance counters> at device 8.2 (no driver attached)
pci0: <dasp, performance counters> at device 9.2 (no driver attached)
pci0: <dasp, performance counters> at device 11.1 (no driver attached)
pci0: <dasp, performance counters> at device 11.2 (no driver attached)
pci0: <dasp, performance counters> at device 16.1 (no driver attached)
pci0: <dasp, performance counters> at device 16.6 (no driver attached)
pci0: <dasp, performance counters> at device 18.1 (no driver attached)
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pci1: <dasp, performance counters> at device 8.2 (no driver attached)
pci1: <dasp, performance counters> at device 9.2 (no driver attached)
pci1: <dasp, performance counters> at device 11.1 (no driver attached)
pci1: <dasp, performance counters> at device 11.2 (no driver attached)
pci1: <dasp, performance counters> at device 16.1 (no driver attached)
pci1: <dasp, performance counters> at device 16.6 (no driver attached)
pci1: <dasp, performance counters> at device 18.1 (no driver attached)
acpi_syscontainer0: <System Container> on acpi0
acpi_syscontainer1: <System Container> on acpi0
acpi_syscontainer2: <System Container> on acpi0
acpi_syscontainer3: <System Container> on acpi0
pcib2: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 26 at device 1.0 on pci2
pci3: <ACPI PCI bus> on pcib3
vgapci0: <VGA-compatible display> port 0x6000-0x607f mem 0xe2000000-
0xe2ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 26 at device
0.0 on pci3
nvidia0: <GeForce GTX 1060 6GB> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: Boot video device
hdac0: <NVIDIA (0x10f1) HDA Controller> mem 0xe3080000-0xe3083fff irq 28
at device 0.1 on pci3
pcib4: <ACPI PCI-PCI bridge> irq 32 at device 2.0 on pci2
pci4: <ACPI PCI bus> on pcib4
arcmsr0: <Areca SAS 6G Host Adapter RAID Controller (RAID6 capable)
arcmsr version 1.40.00.01 2017-10-30
> port 0x5000-0x50ff mem 0xe32c0000-0xe32cffff,0xe3280000-0xe32bffff irq
32 at device 0.0 on pci4
Areca RAID adapter0: ARC-1880 F/W version V1.49 2010-12-10
arcmsr: MSI-X INT enabled
pcib5: <ACPI PCI-PCI bridge> irq 40 at device 3.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pci2: <unknown> at device 17.0 (no driver attached)
ahci0: <Intel Wellsburg AHCI SATA controller> port 0x7110-0x7117,0x7100-
0x7103,0x70f0-0x70f7,0x70e0-0x70e3,0x7020-0x703f mem 0xe1106000-
0xe11067ff irq 16 at device 17.4 on pci2
ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
xhci0: <Intel Wellsburg USB 3.0 controller> mem 0x23ffff00000-
0x23ffff0ffff irq 19 at device 20.0 on pci2
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci2: <simple comms> at device 22.0 (no driver attached)
pci2: <simple comms> at device 22.1 (no driver attached)
ehci0: <Intel Wellsburg USB 2.0 controller> mem 0xe1102000-0xe11023ff
irq 18 at device 26.0 on pci2
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
hdac1: <Intel Wellsburg HDA Controller> mem 0x23ffff10000-0x23ffff13fff
irq 22 at device 27.0 on pci2
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci2
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.0 on pci7
pci8: <ACPI PCI bus> on pcib8
vgapci1: <VGA-compatible display> port 0x4000-0x407f mem 0xe0000000-
0xe0ffffff,0xe1000000-0xe101ffff irq 19 at device 0.0 on pci8
pcib9: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci2
pci9: <ACPI PCI bus> on pcib9
ehci1: <Intel Wellsburg USB 2.0 controller> mem 0xe1101000-0xe11013ff
irq 18 at device 29.0 on pci2
usbus2: EHCI version 1.0
usbus2 on ehci1
usbus2: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci2
isa0: <ISA bus> on isab0
ahci1: <Intel Wellsburg AHCI SATA controller> port 0x7070-0x7077,0x7060-
0x7063,0x7050-0x7057,0x7040-0x7043,0x7000-0x701f mem 0xe1100000-
0xe11007ff irq 16 at device 31.2 on pci2
ahci1: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich4: <AHCI channel> at channel 0 on ahci1
ahcich5: <AHCI channel> at channel 1 on ahci1
ahcich6: <AHCI channel> at channel 2 on ahci1
ahcich7: <AHCI channel> at channel 3 on ahci1
ahcich8: <AHCI channel> at channel 4 on ahci1
ahcich9: <AHCI channel> at channel 5 on ahci1
ahciem1: <AHCI enclosure management bridge> on ahci1
pcib10: <ACPI Host-PCI bridge> on acpi0
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 0.0 on pci10
pci11: <ACPI PCI bus> on pcib11
igb0: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xf020-0xf03f
mem 0xfb220000-0xfb23ffff,0xfb244000-0xfb247fff irq 48 at device 0.0 on
pci11
igb0: attach_pre capping queues at 8
igb0: using 1024 tx descriptors and 1024 rx descriptors
igb0: msix_init qsets capped at 8
igb0: pxm cpus: 12 queue msgs: 9 admincnt: 1
igb0: using 8 rx queues 8 tx queues
igb0: Using MSIX interrupts with 9 vectors
igb0: allocated for 8 tx_queues
igb0: allocated for 8 rx_queues
igb0: Ethernet address: 0c:c4:7a:57:b2:fa
igb0: netmap queues/slots: TX 8/1024, RX 8/1024
igb1: <Intel(R) PRO/1000 PCI-Express Network Driver> port 0xf000-0xf01f
mem 0xfb200000-0xfb21ffff,0xfb240000-0xfb243fff irq 49 at device 0.1 on
pci11
igb1: attach_pre capping queues at 8
igb1: using 1024 tx descriptors and 1024 rx descriptors
igb1: msix_init qsets capped at 8
igb1: pxm cpus: 12 queue msgs: 9 admincnt: 1
igb1: using 8 rx queues 8 tx queues
igb1: Using MSIX interrupts with 9 vectors
igb1: allocated for 8 tx_queues
igb1: allocated for 8 rx_queues
igb1: Ethernet address: 0c:c4:7a:57:b2:fb
igb1: netmap queues/slots: TX 8/1024, RX 8/1024
pcib12: <ACPI PCI-PCI bridge> irq 50 at device 1.0 on pci10
pci12: <ACPI PCI bus> on pcib12
nvme0: <Generic NVMe Device> mem 0xfb100000-0xfb103fff irq 50 at device
0.0 on pci12
pcib13: <ACPI PCI-PCI bridge> irq 64 at device 3.0 on pci10
pci13: <ACPI PCI bus> on pcib13
vgapci2: <VGA-compatible display> port 0xe000-0xe07f mem 0xfa000000-
0xfaffffff,0x27fe0000000-0x27fefffffff,0x27ff0000000-0x27ff1ffffff irq
64 at device 0.0 on pci13
nvidia2: <GeForce GTX 1060 6GB> on vgapci2
vgapci2: child nvidia2 requested pci_enable_io
vgapci2: child nvidia2 requested pci_enable_io
hdac2: <NVIDIA (0x10f1) HDA Controller> mem 0xfb080000-0xfb083fff irq 68
at device 0.1 on pci13
acpi_button0: <Power Button> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, default to
accept, logging disabled
hdacc0: <NVIDIA (0x0084) HDA CODEC> at cad 0 on hdac0
hdaa0: <NVIDIA (0x0084) Audio Function Group> at nid 1 on hdacc0
pcm0: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 4 on hdaa0
pcm1: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 5 on hdaa0
pcm2: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 6 on hdaa0
pcm3: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 7 on hdaa0
hdacc1: <Realtek ALC888 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc1
pcm4: <Realtek ALC888 (Front Analog)> at nid 27 and 25 on hdaa1
pcm5: <Realtek ALC888 (Internal Digital)> at nid 31 on hdaa1
ugen2.1: <Intel EHCI root HUB> at usbus2
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on
usbus0
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
nvd0: <Samsung SSD 960 EVO 250GB> NVMe namespace
nvd0: 238475MB (488397168 512 byte sectors)
hdacc2: <NVIDIA (0x0084) HDA CODEC> at cad 0 on hdac2
hdaa2: <NVIDIA (0x0084) Audio Function Group> at nid 1 on hdacc2
pcm6: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 4 on hdaa2
pcm7: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 5 on hdaa2
pcm8: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 6 on hdaa2
pcm9: <NVIDIA (0x0084) (HDMI/DP 8ch)> at nid 7 on hdaa2
da0 at arcmsr0 bus 0 scbus0 target 0 lun 0
da0: <Areca ARC-1880-VOL#002 R001> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number 415ca20696551232
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 953674MB (1953124352 512 byte sectors)
da2 at arcmsr0 bus 0 scbus0 target 0 lun 2
da2: <Seagate ST6000DM004-2EH1 R001> Fixed Direct Access SPC-3 SCSI
device
da2: Serial Number ZA16HR9M
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 5723166MB (11721045168 512 byte sectors)
da3 at arcmsr0 bus 0 scbus0 target 0 lun 3
da3: <Seagate ST6000DM004-2EH1 R001> Fixed Direct Access SPC-3 SCSI
device
da3: Serial Number ZA16K7BT
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 5723166MB (11721045168 512 byte sectors)
da1 at arcmsr0 bus 0 scbus0 target 0 lun 1
da1: <Areca Junk R001> Fixed Direct Access SPC-3 SCSI device
da1: Serial Number 415ca23892047968
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 7629394MB (1953124928 4096 byte sectors)
ses0 at ahciem0 bus 0 scbus5 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ses1 at ahciem1 bus 0 scbus12 target 0 lun 0
ses1: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses1: SEMB SES Device
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <ST6000DM004-2EH11C DN03> ACS-3 ATA SATA 3.x device
ada0: Serial Number ZA161QN5
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 5723166MB (11721045168 512 byte sectors)
ada0: quirks=0x1<4K>
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <INTEL SSDSC2BP240G4 L2010420> ATA8-ACS SATA 3.x device
ada1: Serial Number BTJR5150020R240AGN
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 228936MB (468862128 512 byte sectors)
ada2 at ahcich2 bus 0 scbus3 target 0 lun 0
ada2: <INTEL SSDSC2BP240G4 L2010420> ATA8-ACS SATA 3.x device
ada2: Serial Number BTJR516602V5240AGN
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada2: Command Queueing enabled
ada2: 228936MB (468862128 512 byte sectors)
ada3 at ahcich3 bus 0 scbus4 target 0 lun 0
ada3: <INTEL SSDSC2BW120H6 RG21> ACS-3 ATA SATA 3.x device
ada3: Serial Number CVTR5233023V120AGN
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 114473MB (234441648 512 byte sectors)
ada3: quirks=0x1<4K>
ada4 at ahcich4 bus 0 scbus6 target 0 lun 0
ada4: <ST6000DM004-2EH11C DN03> ACS-3 ATA SATA 3.x device
ada4: Serial Number ZA16G7M6
ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada4: Command Queueing enabled
ada4: 5723166MB (11721045168 512 byte sectors)
ada4: quirks=0x1<4K>
ada5 at ahcich5 bus 0 scbus7 target 0 lun 0
ada5: <ST6000DM004-2EH11C DN03> ACS-3 ATA SATA 3.x device
ada5: Serial Number ZA16H0NL
ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada5: Command Queueing enabled
ada5: 5723166MB (11721045168 512 byte sectors)
ada5: quirks=0x1<4K>
ada6 at ahcich6 bus 0 scbus8 target 0 lun 0
ada6: <ST6000DM004-2EH11C DN03> ACS-3 ATA SATA 3.x device
ada6: Serial Number ZA16L0FB
ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada6: Command Queueing enabled
ada6: 5723166MB (11721045168 512 byte sectors)
ada6: quirks=0x1<4K>
ada7 at ahcich9 bus 0 scbus11 target 0 lun 0
ada7: <SuperMicro SSD SOB20R> ACS-2 ATA SATA 3.x device
ada7: Serial Number SMC0515D92117CF22668
ada7: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada7: Command Queueing enabled
ada7: 60416MB (123731968 512 byte sectors)
uhub0: pass4 at arcmsr0 bus 0 scbus0 target 16 lun 0
2 ports with 2 removable, self powered
uhub2: pass4: <Areca RAID controller R001> Fixed Processor SCSI device
2 ports with 2 removable, self powered
random: unblocking device.
uhub1: 21 ports with 21 removable, self powered
Root mount waiting for: usbus2 usbus1 usbus0
ugen1.2: <vendor 0x8087 product 0x800a> at usbus1
uhub3 on uhub2
uhub3: <vendor 0x8087 product 0x800a, class 9/0, rev 2.00/0.05, addr 2>
on usbus1
ugen2.2: <vendor 0x8087 product 0x8002> at usbus2
uhub4 on uhub0
uhub4: <vendor 0x8087 product 0x8002, class 9/0, rev 2.00/0.05, addr 2>
on usbus2
ugen0.2: <PixArt Microsoft USB Optical Mouse> at usbus0
uhub3: 6 ports with 6 removable, self powered
uhub4: 8 ports with 8 removable, self powered
ugen0.3: <BTC USB Multimedia Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2>
on usbus0
kbd2 at ukbd0
ugen0.4: <vendor 0x0557 product 0x7000> at usbus0
uhub5 on uhub1
uhub5: <vendor 0x0557 product 0x7000, class 9/0, rev 2.00/0.00, addr 3>
on usbus0
Root mount waiting for: usbus0
uhub5: 4 ports with 3 removable, self powered
ugen0.5: <vendor 0x0557 product 0x2419> at usbus0
ukbd1 on uhub5
ukbd1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4>
on usbus0
kbd3 at ukbd1
Loader variables:
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:zroot/ROOT/default
cd9660:/dev/cd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot> Trying to mount root from ufs:/dev/da0p3 []...
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX
platforms 390.87 Tue Aug 21 15:53:31 PDT 2018
lo0: link state changed to UP
gif0: link state changed to UP
igb1: link state changed to UP
igb0: link state changed to UP
ioat0: <HSW IOAT Ch0> mem 0x23ffff30000-0x23ffff33fff irq 31 at device
4.0 on pci2
ioat0: Capabilities:
2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page
_Break>
ioat1: <HSW IOAT Ch1> mem 0x23ffff2c000-0x23ffff2ffff irq 39 at device
4.1 on pci2
ioat1: Capabilities:
2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page
_Break>
ioat2: <HSW IOAT Ch2> mem 0x23ffff28000-0x23ffff2bfff irq 31 at device
4.2 on pci2
ioat2: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat3: <HSW IOAT Ch3> mem 0x23ffff24000-0x23ffff27fff irq 39 at device
4.3 on pci2
ioat3: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat4: <HSW IOAT Ch4> mem 0x23ffff20000-0x23ffff23fff irq 31 at device
4.4 on pci2
ioat4: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat5: <HSW IOAT Ch5> mem 0x23ffff1c000-0x23ffff1ffff irq 39 at device
4.5 on pci2
ioat5: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat6: <HSW IOAT Ch6> mem 0x23ffff18000-0x23ffff1bfff irq 31 at device
4.6 on pci2
ioat6: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat7: <HSW IOAT Ch7> mem 0x23ffff14000-0x23ffff17fff irq 39 at device
4.7 on pci2
ioat7: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat8: <HSW IOAT Ch0> mem 0x27ffff1c000-0x27ffff1ffff irq 55 at device
4.0 on pci10
ioat8: Capabilities:
2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page
_Break>
ioat9: <HSW IOAT Ch1> mem 0x27ffff18000-0x27ffff1bfff irq 63 at device
4.1 on pci10
ioat9: Capabilities:
2f7<PQ,Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page
_Break>
ioat10: <HSW IOAT Ch2> mem 0x27ffff14000-0x27ffff17fff irq 55 at device
4.2 on pci10
ioat10: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat11: <HSW IOAT Ch3> mem 0x27ffff10000-0x27ffff13fff irq 63 at device
4.3 on pci10
ioat11: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat12: <HSW IOAT Ch4> mem 0x27ffff0c000-0x27ffff0ffff irq 55 at device
4.4 on pci10
ioat12: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat13: <HSW IOAT Ch5> mem 0x27ffff08000-0x27ffff0bfff irq 63 at device
4.5 on pci10
ioat13: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat14: <HSW IOAT Ch6> mem 0x27ffff04000-0x27ffff07fff irq 55 at device
4.6 on pci10
ioat14: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ioat15: <HSW IOAT Ch7> mem 0x27ffff00000-0x27ffff03fff irq 63 at device
4.7 on pci10
ioat15: Capabilities:
f7<Extended_APIC_ID,Block_Fill,Move_CRC,DCA,Marker_Skipping,CRC,Page_Bre
ak>
ums0 on uhub1
ums0: <PixArt Microsoft USB Optical Mouse, class 0/0, rev 1.10/1.00,
addr 1> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub1
uhid0: <BTC USB Multimedia Keyboard, class 0/0, rev 1.10/1.00, addr 2>
on usbus0
ums1 on uhub5
ums1: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 4>
on usbus0
ums1: 3 buttons and [Z] coordinates ID=0
aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
eroot@btw# cat /boot/loader.conf
aesni_load="YES"
cc_cubic_load="YES"
cc_htcp_load="YES"
cc_cdg_load="YES"
cc_chd_load="YES"
cc_hd_load="YES"
cc_vegas_load="YES"
coretemp_load="YES"
cryptodev_load="YES"
nvidia_load="YES"
nvidia-modeset_load="YES"
snd_hda_load="YES"
tmpfs_load="YES"
kern.ipc.nmbclusters=1048576
vfs.zfs.arc_max="64G"
vfs.zfs.txg.timeout=300
hw.intr_storm_threshold=1000000
kern.vty=vt
kern.random.fortuna.minpoolsize=256
net.inet.tcp.cc.algorithm="cdg"
net.inet.tcp.hostcache.hashsize=1024
net.inet.ip.random_id=1
hw.intr_storm_threshold=1000000
net.inet.tcp.soreceive_stream=1
net.inet.tcp.hostcache.cachelimit=0
root@btw# gpart show da0
=> 34 1953124285 da0 GPT (931G)
34 128 1 freebsd-boot (64K)
162 67108864 2 freebsd-swap (32G)
67109026 1886015293 3 freebsd-ufs [bootme] (899G)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?b5310c6076ac273971b64f1e3e7a83bc4bbb7fa0.camel>