Date: Thu, 24 Mar 2005 23:48:01 -0500 From: <bob@a1poweruser.com> To: "JP" <jprez1980@yahoo.com>, <freebsd-questions@freebsd.org> Subject: RE: ppp.conf PPPoE Errors Message-ID: <MIEPLLIBMLEEABPDBIEGMEIFHCAA.bob@a1poweruser.com> In-Reply-To: <20050324132957.86747.qmail@web81006.mail.yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
You used outdated example for your for ppp.conf. Try this from http://freebsd.packards-home.net/Free_guide_index.html PPPoE, ppp.conf statements for DSL connection Edit the ppp.conf file and add the following so this is all that is in the file. Read the comments and do what they say. cd /etc/ppp/ # move into directory cp ppp.conf ppp.conf.org # Save copy of original ee ppp.conf # Edit file add following #################### start of DSL ppp.conf ################### default: set log Phase tun #use to avoid excessive log sizes set timeout 0 # no idle time out, will not disconnect dialisp: set device PPPoE:XXX # replace xxx with your NIC device name set authname YOURLOGINNAME # Replace with your ISP account username set authkey YOURPASSWORD # Replace with your ISP account password add default HISADDR # Add a (sticky) default route (Mandatory) enable dns # Gets the ISP's DNS IP address & places them # in resolv.conf for reference by FBSD box. ############### End of DSL ppp.conf ################################# Replace the XXX in the [set device PPPoE:XXX] statement with the NIC's FBSD interface name. Sometimes it will be necessary to use a service tag to establish your connection depending on how your ISP and/or the phone company has its DSL network configured. Service tags are used to distinguish between different PPPoE servers attached to a given network. You should have been given any required service tag information in the documentation provided by your ISP. If you cannot locate it there, ask your ISP's tech support personnel. This is the format of the command with the service tag added: set device PPPoE:xxxx:service_tag The xxxx is the FBSD interface name used by PPPoE. The interface must be UP (IE: enabled). It is only used as a transport, and does not need to be assigned an IP address. This can be done automatically at boot time by updating the /etc/rc.conf file. The format of the statement to add is ifconfig_xxxx=up where xxxx is the NIC's FBSD interface name used by PPPoE that you specified in the /etc/ppp/ppp.conf file. ee /etc/rc.conf # add following statements ifconfig_xxxx=up ifconfig_tun0="DHCP" # get your ISP assigned IP address To setup user ppp to dial your ISP automatically at FBSD boot time, you have to add the following statements to the rc.conf file. The ddial option means to redial every time the connection to the ISP gets dropped. ee /etc/rc.conf # Activate user ppp auto start at boot time ppp_enable="YES" # Start User PPP task ppp_mode="ddial" # ddial, auto, background ppp_profile="dialisp" # section in ppp.conf to exec #ppp_nat="YES" # only if you have LAN behind this PC. -----Original Message----- From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd-questions@freebsd.org]On Behalf Of JP Sent: Thursday, March 24, 2005 8:30 AM To: freebsd-questions@freebsd.org Subject: ppp.conf PPPoE Errors Hello, I just recently set up ppp.conf for PPPoE DSL Service with SBC. I'm getting the following errors in my /var/log/ppp.log file, any idea what it means? I assume I need to disable IPV6 somehow but I don't know. Mar 23 09:35:19 mcknytxhqfw01 ppp[483]: tun0: Phase: deflink: his = PAP, m Mar 23 09:35:19 mcknytxhqfw01 ppp[483]: tun0: Phase: Pap Output: xxxxxx * Mar 23 09:35:19 mcknytxhqfw01 ppp[483]: tun0: Phase: Pap Input: SUCCESS () Mar 23 09:35:19 mcknytxhqfw01 ppp[483]: tun0: Phase: deflink: lcp -> open Mar 23 09:35:19 mcknytxhqfw01 ppp[483]: tun0: Phase: bundle: Network Mar 23 09:35:19 mcknytxhqfw01 ppp[483]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP ! Mar 23 09:49:20 last message repeated 15 times My ppp.conf file: default: set device PPPoE:ed0:SBCIS set mtu 1492 add default HISADDR set time 0 set redial 0 0 # NAT Config nat enable yes nat log yes nat same_ports yes nat unregistered_only yes enable dns SBCIS: set authname xxxxxx set authkey xxxxxx Thanks! JP _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?MIEPLLIBMLEEABPDBIEGMEIFHCAA.bob>