Date: Fri, 30 Sep 2005 16:42:16 +0200 From: JaNy <j@simplevoice.net> To: freebsd-usb@freebsd.org Subject: Low umass performance with USB 2.0 ports on HP ProLiant DL360 Message-ID: <433D4EC8.60101@simplevoice.net>
next in thread | raw e-mail | index | archive | help
Hello! I have similar problems like others with my external USB2 disk. Transfer never exeeds 1MB/s. I tried various hardware configurations but none of them resulted in successfully installing EHCI driver. My best guess is that EHCI driver doesn't support Genesyslogic chipset in external hard drive chasis (noname manufacturer). HP server should be fully compatible with usb2 specification. Where should I search or what system information should provide to solve the problem? Thank you very much! Jan Kumer ------------------------------------------------------------------------------------------------------ more info: ------------------------------------------------------------------------------------------------------ Server type: HP ProLiant DL360 G3 dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-RELEASE-p19 #8: Thu Jul 21 21:05:55 CEST 2005 janybravo@atapajtl.skupinasv.com:/usr/obj/usr/src/sys/ATAPAJTL ACPI APIC Table: <COMPAQ 00000083> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.06GHz (3065.81-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1073717248 (1023 MB) avail memory = 1045364736 (996 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 6 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard ioapic3 <Version 1.1> irqs 48-63 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <COMPAQ P31> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0 cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <display, VGA> at device 3.0 (no driver attached) ciss0: <Compaq Smart Array 5i> port 0x2800-0x28ff mem 0xf5df0000-0xf5df3fff,0xf5f80000-0xf5fbffff irq 31 at device 4.0 on pci0 ciss0: [GIANT-LOCKED] pci0: <base peripheral> at device 5.0 (no driver attached) pci0: <base peripheral> at device 5.2 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x2000-0x200f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5e70000-0xf5e70fff irq 10 at device 15.2 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered umass0: Genesyslogic USB Mass Storage Device, rev 2.00/0.33, addr 2 pcib1: <ACPI Host-PCI bridge> on acpi0 pci1: <ACPI PCI bus> on pcib1 bge0: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ef0000-0xf7efffff irq 30 at device 2.0 on pci1 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:0b:cd:fe:cc:88 pcib2: <ACPI Host-PCI bridge> on acpi0 pci4: <ACPI PCI bus> on pcib2 bge1: <Broadcom BCM5703 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf7ff0000-0xf7ffffff irq 29 at device 2.0 on pci4 miibus1: <MII bus> on bge1 brgphy1: <BCM5703 10/100/1000baseTX PHY> on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge1: Ethernet address: 00:0b:cd:fe:cc:87 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd0: [GIANT-LOCKED] sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 orm0: <ISA Option ROMs> at iomem 0xee000-0xeffff,0xcc000-0xcd7ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled acd0: CDROM <COMPAQ CD-ROM SN-124/N104> at ata0-master PIO4 da0 at ciss0 bus 0 target 0 lun 0 da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da0: 135.168MB/s transfers da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C) da1 at ciss0 bus 0 target 1 lun 0 da1: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device da1: 135.168MB/s transfers da1: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C) SMP: AP CPU #1 Launched! da2 at umass-sim0 bus 0 target 0 lun 0 da2: <Maxtor 7 Y250P0 0811> Fixed Direct Access SCSI-0 device da2: 1.000MB/s transfers da2: 239372MB (490234752 512 byte sectors: 255H 63S/T 30515C) mount /dev/da2s1d on /backup (ufs, local, soft-updates) usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x0000), (0x1166)(0x0000), rev 1.00 port 1 powered port 2 powered port 3 addr 2: full speed, self powered, config 1, USB Mass Storage Device(0x0702), Genesyslogic(0x05e3), rev 0.33 port 4 powered sysctl -a | grep hci dev.ohci.0.%desc: OHCI (generic) USB controller dev.ohci.0.%driver: ohci dev.ohci.0.%location: slot=15 function=2 dev.ohci.0.%pnpinfo: vendor=0x1166 device=0x0220 subvendor=0x1166 subdevice=0x0220 class=0x0c0310 dev.ohci.0.%parent: pci0 dev.usb.0.%parent: ohci0 more /sys/i368/conf/ATAPAJTL # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB Ethernet #device axe # ASIX Electronics USB Ethernet #device cue # CATC USB Ethernet #device kue # Kawasaki LSI USB Ethernet #device rue # RealTek RTL8150 USB Ethernet device ehci # USB2 controllers more /etc/rc.conf usbd_enable="YES"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?433D4EC8.60101>