Date: Mon, 12 Aug 2002 21:06:03 +0200 From: Marcin Gryszkalis <mgryszkalis@cerint.pl> To: mjacob@feral.com Cc: freebsd-alpha <freebsd-alpha@FreeBSD.ORG>, freebsd-scsi@FreeBSD.ORG Subject: Re: ISP Nvram [ was 'da driver problem?' ] Message-ID: <3D58071B.6070901@cerint.pl> References: <Pine.BSF.4.21.0208121012280.73304-100000@beppo>
next in thread | previous in thread | raw e-mail | index | archive | help
Matthew Jacob wrote: > Interrupt the boot process and at the loader prompt do > set isp_debug=0x1f > and boot (or fail to boot) and send us the output. > Or add > set isp_no_nvram=0x1 > to keep NVRAM from being read. I'll try... (I'll be able to do it on wednesday). > You haven't said whether you're now loading isp firmware or not. I loaded ispfw.ko (w/o any difference). Preloaded elf kernel "kernel" at 0xfffffc0000600000. Preloaded elf module "ispfw.ko" at 0xfffffc00006000c0. ... isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82018000-0x82018fff irq 12 at device 9.0 on pci0 isp0: interrupting at CIA irq 12 isp0: invalid NVRAM header da0 at isp0 bus 0 target 1 lun 0 da0: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled da0: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) da1 at isp0 bus 0 target 2 lun 0 da1: <DEC RZ29B (C) DEC 0016> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (10.000MHz, offset 12, 16bit), Tagged Queueing Enabled da1: 4091MB (8380080 512 byte sectors: 255H 63S/T 521C) ... -- Marcin Gryszkalis <mg@cerint.pl> or <dagoon@math.uni.lodz.pl> To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D58071B.6070901>