Date: Fri, 30 Nov 2012 22:22:49 -0800 (PST) From: Garrett Cooper <yanegomi@gmail.com> To: brde@optusnet.com.au Cc: freebsd-net@freebsd.org Subject: Re: [RFC] Better document net.inet6 sysctls and prune dead sysctls (fwd) Message-ID: <alpine.BSF.2.00.1211302222200.57210@toaster.local> In-Reply-To: <alpine.BSF.2.00.1211302204460.57210@toaster.local> References: <alpine.BSF.2.00.1211302204460.57210@toaster.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 30 Nov 2012, Garrett Cooper wrote: > On Tue, 27 Nov 2012, Bruce Evans wrote: > >> On Mon, 26 Nov 2012, Garrett Cooper wrote: >> >>> As noted in a previous thread, I set out to better document the >>> net.inet6 sysctls after having to tweak the knobs to get things to work >>> for TAHI, and this is the resulting draft (so far). I also took the >>> liberty of removing the ip6_rr_prune and icmp6_redirtimeout sysctls >>> because they weren't in use anywhere else in the sys/... portion of the >>> tree. I was wondering if there are any points that should be >>> corrected/clarified before I submit a PR with the resulting patch. >> >> It would be good to fix the style bugs when changing lots. >> >>> Index: sys/netinet6/in6_proto.c >>> =================================================================== >>> --- sys/netinet6/in6_proto.c (revision 242903) >>> +++ sys/netinet6/in6_proto.c (working copy) >>> @@ -443,7 +441,6 @@ >>> >>> /* ICMPV6 parameters */ >>> VNET_DEFINE(int, icmp6_rediraccept) = 1;/* accept and process redirects */ >>> -VNET_DEFINE(int, icmp6_redirtimeout) = 10 * 60; /* 10 minutes */ >>> VNET_DEFINE(int, icmp6errppslim) = 100; /* 100pps */ >>> /* control how to respond to NI queries */ >>> VNET_DEFINE(int, icmp6_nodeinfo) = >>> @@ -515,15 +512,20 @@ >>> } >>> >>> SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_FORWARDING, forwarding, >>> CTLFLAG_RW, >>> - &VNET_NAME(ip6_forwarding), 0, ""); >>> + &VNET_NAME(ip6_forwarding), 0, >>> + "Forward IPv6 packets via node."); >> >> All the sysctl names spell ipv6 without a v. This is hard to fix. This >> bug is missing in the names of the sysctl numbers, but it is a bug to >> used named numbers instead of OID_AUTO in code newer than OID_AUTO, and >> ipv6 is much newer. >> >> New style bug in almost every description. Sysctl descriptions are not >> normally terminated by a ".". >> >> Old style bug in almost every ipv6 sysctl. Large SYSCTL declarations are >> normally normally-indented, with 4-space continuation indents. This rule >> is broken farily consistenly in ipv6 sysctl. More ivp4 SYSCTL descriptions >> are actually formatted normally. >> >>> @@ -594,35 +613,45 @@ >>> #define V_ip6_output_flowtable_size VNET(ip6_output_flowtable_size) >>> >>> SYSCTL_VNET_INT(_net_inet6_ip6, OID_AUTO, output_flowtable_size, >>> CTLFLAG_RDTUN, >>> - &VNET_NAME(ip6_output_flowtable_size), 2048, >>> - "number of entries in the per-cpu output flow caches"); >>> + &VNET_NAME(ip6_output_flowtable_size), 2048, >>> + "number of entries in the per-cpu output flow caches"); >>> ... >> >> Here the formatting change is backwards (from normal continuation indent >> to abnormal ipv6 continuation indent. >> >> This and some other old sysctl descriptions have differnent style bugs: >> they are normally terminated (not with a '.'), but are not normally >> capitalized (with capaitals). >> >>> SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_PRUNE, nd6_prune, >>> CTLFLAG_RW, >> >> Some mailer mangled the formatting (the line isn't too long and shouldn't >> have been mangled). >> >>> - &VNET_NAME(nd6_prune), 0, ""); >>> + &VNET_NAME(nd6_prune), 0, >>> + "Period (in seconds) for performing nd6 expiration checks of default >>> " >> >> More mangling by some mailer. >> >>> + "routes and prefix lists"); >> >> However, the string is too long. The message is obfuscated by splitting >> it. >> This keeps the line length short in the source code, but it is still too >> long in the output. Sysctl descriptions should be no longer than 50 or >> 60 characters, since the sysctl name will expand the output by 20 or 30 >> characters. sysctl names longer than 20 or 30 are a larger bug, since >> they are hard to write as well as hard to read. >> >> This sysctl description is normally terminated (not with a "."). >> >>> ... >>> SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_UMAXTRIES, nd6_umaxtries, >>> - CTLFLAG_RW, &VNET_NAME(nd6_umaxtries), 0, ""); >>> + CTLFLAG_RW, &VNET_NAME(nd6_umaxtries), 0, >>> + "Maximum number of unicast queries to perform via nd6."); >> >> Another type of sysctl misformatting is generated by names that are so >> verbose that CTLFLAG* cannot be formatted normally (on the first line). >> >> I missed earlier instances of these bugs. >> >> Statistic on output style in sysctl descriptions: on freefall now: >> sysctl -da: 3546 lines >> sysctl -da | grep -v ': *$': 3192 lines >> [this filters out sysctls with null descriptions. The output is >> misformatted with a space before the null description] >> sysctl -nda: 3546 lines >> sysctl -nda | grep -v '^: *$': 3192 lines >> [since this 3192 is the same as the number of sysctls with non-null >> descreiptions, there must be no multi-line descriptions with embedded >> newlines] >> sysctl -nda | grep -v '^: *$' | grep -v '^[A-Z]': >> 1555 lines >> [most of non-capitalizations are style bugs. The last 1395 of them >> are automatically generated for device sysctls. This is part of 5 >> lines of automatically generated spam for device sysctls (descriptions >> are duplicated ad spamium for %desc, %driver, %location, %pnpinfo and >> %parent). A few are correct because they are for a proper name or >> keyword or a number] >> sysctl -nda | grep -v '^: *$' | grep '\.$': >> 74 lines >> [the style bug of terminating with a '.' is uncommon. In a few cases >> it goes with the larger style bug of a multi-line description] >> sysctl -nda | grep -v '^: *$' | grep '.... [81 dots]': >> 11 lines >> [these lines are too long even without the sysctl names. Abnormal >> termination is denser than usual in these lines (8 of 11)] >> sysctl -nda | grep -v '^: *$' | grep '\..*\.': >> 8 lines >> [2 of these are for multi-sentence descriptions]. > > Bruce, > Is this better? I tried to be consistent about using v6 properly when > dealing with protocols in order to match what the IETF did and I believe I > properly integrated in your comments. > Thanks! > -Garrett > > Index: sys/netinet6/in6_proto.c > =================================================================== > --- sys/netinet6/in6_proto.c (revision 243557) > +++ sys/netinet6/in6_proto.c (working copy) > @@ -131,7 +131,7 @@ > #endif > > /* > - * TCP/IP protocol family: IP6, ICMP6, UDP, TCP. > + * TCP/IP protocol family: IPv6, ICMPv6, UDPv6, TCPv6. > */ > FEATURE(inet6, "Internet Protocol version 6"); > > @@ -382,9 +382,9 @@ > */ > #ifndef IPV6FORWARDING > #ifdef GATEWAY6 > -#define IPV6FORWARDING 1 /* forward IP6 packets not for us */ > +#define IPV6FORWARDING 1 /* forward IPv6 packets */ > #else > -#define IPV6FORWARDING 0 /* don't forward IP6 packets not for > us */ > +#define IPV6FORWARDING 0 /* don't forward IPv6 packets */ > #endif /* GATEWAY6 */ > #endif /* !IPV6FORWARDING */ > > @@ -409,8 +409,6 @@ > VNET_DEFINE(int, ip6_auto_flowlabel) = 1; > VNET_DEFINE(int, ip6_use_deprecated) = 1;/* allow deprecated addr > * (RFC2462 5.5.4) */ > -VNET_DEFINE(int, ip6_rr_prune) = 5; /* router renumbering prefix > - * walk list every 5 sec. */ > VNET_DEFINE(int, ip6_mcast_pmtu) = 0; /* enable pMTU discovery for > multicast? */ > VNET_DEFINE(int, ip6_v6only) = 1; > > @@ -431,7 +429,7 @@ > VNET_DEFINE(int, pmtu_expire) = 60*10; > VNET_DEFINE(int, pmtu_probe) = 60*2; > > -/* raw IP6 parameters */ > +/* raw IPV6 parameters */ > /* > * Nominal space allocated to a raw ip socket. > */ > @@ -443,13 +441,12 @@ > > /* ICMPV6 parameters */ > VNET_DEFINE(int, icmp6_rediraccept) = 1;/* accept and process redirects */ > -VNET_DEFINE(int, icmp6_redirtimeout) = 10 * 60; /* 10 minutes */ > VNET_DEFINE(int, icmp6errppslim) = 100; /* 100pps */ > /* control how to respond to NI queries */ > VNET_DEFINE(int, icmp6_nodeinfo) = > (ICMP6_NODEINFO_FQDNOK|ICMP6_NODEINFO_NODEADDROK); > > -/* UDP on IP6 parameters */ > +/* UDP on IPv6 parameters */ > VNET_DEFINE(int, udp6_sendspace) = 9216;/* really max datagram size */ > VNET_DEFINE(int, udp6_recvspace) = 40 * (1024 + sizeof(struct > sockaddr_in6)); > /* 40 1K datagrams */ > @@ -461,12 +458,12 @@ > "Internet6 Family"); > > /* net.inet6 */ > -SYSCTL_NODE(_net_inet6, IPPROTO_IPV6, ip6, CTLFLAG_RW, 0, > "IP6"); > -SYSCTL_NODE(_net_inet6, IPPROTO_ICMPV6, icmp6, CTLFLAG_RW, 0, > "ICMP6"); > -SYSCTL_NODE(_net_inet6, IPPROTO_UDP, udp6, CTLFLAG_RW, 0, > "UDP6"); > -SYSCTL_NODE(_net_inet6, IPPROTO_TCP, tcp6, CTLFLAG_RW, 0, > "TCP6"); > +SYSCTL_NODE(_net_inet6, IPPROTO_IPV6, ip6, CTLFLAG_RW, 0, > "IPv6"); > +SYSCTL_NODE(_net_inet6, IPPROTO_ICMPV6, icmp6, CTLFLAG_RW, 0, > "ICMPv6"); > +SYSCTL_NODE(_net_inet6, IPPROTO_UDP, udp6, CTLFLAG_RW, 0, > "UDPv6"); > +SYSCTL_NODE(_net_inet6, IPPROTO_TCP, tcp6, CTLFLAG_RW, 0, > "TCPv6"); > #ifdef SCTP > -SYSCTL_NODE(_net_inet6, IPPROTO_SCTP, sctp6, CTLFLAG_RW, 0, > "SCTP6"); > +SYSCTL_NODE(_net_inet6, IPPROTO_SCTP, sctp6, CTLFLAG_RW, 0, > "SCTPv6"); > #endif > #ifdef IPSEC > SYSCTL_NODE(_net_inet6, IPPROTO_ESP, ipsec6, CTLFLAG_RW, 0, > "IPSEC6"); > @@ -515,77 +512,99 @@ > } > > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_FORWARDING, forwarding, CTLFLAG_RW, > - &VNET_NAME(ip6_forwarding), 0, ""); > + &VNET_NAME(ip6_forwarding), 0, > + "Forward IPv6 packets via node"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_SENDREDIRECTS, redirect, CTLFLAG_RW, > - &VNET_NAME(ip6_sendredirects), 0, ""); > + &VNET_NAME(ip6_sendredirects), 0, > + "Redirect IPv6 packets via node"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_DEFHLIM, hlim, CTLFLAG_RW, > - &VNET_NAME(ip6_defhlim), 0, ""); > + &VNET_NAME(ip6_defhlim), 0, > + "Default hop limit for IPv6 unicast packets"); > SYSCTL_VNET_STRUCT(_net_inet6_ip6, IPV6CTL_STATS, stats, CTLFLAG_RW, > - &VNET_NAME(ip6stat), ip6stat, ""); > + &VNET_NAME(ip6stat), ip6stat, > + "IPv6 statistics"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_MAXFRAGPACKETS, maxfragpackets, > - CTLFLAG_RW, &VNET_NAME(ip6_maxfragpackets), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_maxfragpackets), 0, > + "Maximum number of fragmented packets to process"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_ACCEPT_RTADV, accept_rtadv, > - CTLFLAG_RW, &VNET_NAME(ip6_accept_rtadv), 0, > - "Default value of per-interface flag for accepting ICMPv6 Router" > - "Advertisement messages"); > + CTLFLAG_RW, &VNET_NAME(ip6_accept_rtadv), 0, > + "Default value of per-interface flag for accepting ICMPv6 Router" > + "Advertisement messages"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_NO_RADR, no_radr, > - CTLFLAG_RW, &VNET_NAME(ip6_no_radr), 0, > - "Default value of per-interface flag to control whether routers " > - "sending ICMPv6 RA messages on that interface are added into the " > - "default router list."); > + CTLFLAG_RW, &VNET_NAME(ip6_no_radr), 0, > + "Default value of per-interface flag to control whether routers " > + "sending ICMPv6 RA messages on that interface are added into the " > + "default router list"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_NORBIT_RAIF, norbit_raif, > CTLFLAG_RW, > - &VNET_NAME(ip6_norbit_raif), 0, > - "Always set 0 to R flag in ICMPv6 NA messages when accepting RA" > - " on the interface."); > + &VNET_NAME(ip6_norbit_raif), 0, > + "Always set 0 to R flag in ICMPv6 NA messages when accepting RA " > + "on the interface"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_RFC6204W3, rfc6204w3, > - CTLFLAG_RW, &VNET_NAME(ip6_rfc6204w3), 0, > - "Accept the default router list from ICMPv6 RA messages even " > - "when packet forwarding enabled."); > + CTLFLAG_RW, &VNET_NAME(ip6_rfc6204w3), 0, > + "Accept the default router list from ICMPv6 RA messages even when packet > " > + "forwarding enabled"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_KEEPFAITH, keepfaith, CTLFLAG_RW, > - &VNET_NAME(ip6_keepfaith), 0, ""); > + &VNET_NAME(ip6_keepfaith), 0, > + ""); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_LOG_INTERVAL, log_interval, > - CTLFLAG_RW, &VNET_NAME(ip6_log_interval), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_log_interval), 0, > + "Period (in secs) for throttling logging for high-traffic operations"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_HDRNESTLIMIT, hdrnestlimit, > - CTLFLAG_RW, &VNET_NAME(ip6_hdrnestlimit), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_hdrnestlimit), 0, > + "Maximum number of nested header options to process"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_DAD_COUNT, dad_count, CTLFLAG_RW, > - &VNET_NAME(ip6_dad_count), 0, ""); > + &VNET_NAME(ip6_dad_count), 0, > + "Number of Duplicate Address Detection attempts to try before " > + "disabling interface. Setting the value to 0 disables DAD"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_AUTO_FLOWLABEL, auto_flowlabel, > - CTLFLAG_RW, &VNET_NAME(ip6_auto_flowlabel), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_auto_flowlabel), 0, > + "Automatically attach a flowlabel to IPv6 packets"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_DEFMCASTHLIM, defmcasthlim, > - CTLFLAG_RW, &VNET_NAME(ip6_defmcasthlim), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_defmcasthlim), 0, > + "Default hop limit for ip6 multicast packets"); > SYSCTL_STRING(_net_inet6_ip6, IPV6CTL_KAME_VERSION, kame_version, > - CTLFLAG_RD, __KAME_VERSION, 0, ""); > + CTLFLAG_RD, __KAME_VERSION, 0, > + ""); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_USE_DEPRECATED, use_deprecated, > - CTLFLAG_RW, &VNET_NAME(ip6_use_deprecated), 0, ""); > -SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_RR_PRUNE, rr_prune, CTLFLAG_RW, > - &VNET_NAME(ip6_rr_prune), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_use_deprecated), 0, > + "Use deprecated IPv6 support"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_USETEMPADDR, use_tempaddr, > - CTLFLAG_RW, &VNET_NAME(ip6_use_tempaddr), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_use_tempaddr), 0, > + "Use a temporary address when establishing address via SLAAC"); > SYSCTL_VNET_PROC(_net_inet6_ip6, IPV6CTL_TEMPPLTIME, temppltime, > - CTLTYPE_INT|CTLFLAG_RW, &VNET_NAME(ip6_temp_preferred_lifetime), 0, > - sysctl_ip6_temppltime, "I", ""); > + CTLTYPE_INT|CTLFLAG_RW, &VNET_NAME(ip6_temp_preferred_lifetime), 0, > + sysctl_ip6_temppltime, "I", > + "Preferred lifetime (in secs) for a temporary address"); > SYSCTL_VNET_PROC(_net_inet6_ip6, IPV6CTL_TEMPVLTIME, tempvltime, > - CTLTYPE_INT|CTLFLAG_RW, &VNET_NAME(ip6_temp_valid_lifetime), 0, > - sysctl_ip6_tempvltime, "I", ""); > + CTLTYPE_INT|CTLFLAG_RW, &VNET_NAME(ip6_temp_valid_lifetime), 0, > + sysctl_ip6_tempvltime, "I", > + "Valid lifetime (in secs) for a temporary address"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_V6ONLY, v6only, CTLFLAG_RW, > - &VNET_NAME(ip6_v6only), 0, ""); > + &VNET_NAME(ip6_v6only), 0, > + "Allow IPv4-mapped ip6 addresses per RFC 3493"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_AUTO_LINKLOCAL, auto_linklocal, > - CTLFLAG_RW, &VNET_NAME(ip6_auto_linklocal), 0, > - "Default value of per-interface flag for automatically adding an > IPv6" > - " link-local address to interfaces when attached"); > -SYSCTL_VNET_STRUCT(_net_inet6_ip6, IPV6CTL_RIP6STATS, rip6stats, CTLFLAG_RW, > - &VNET_NAME(rip6stat), rip6stat, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_auto_linklocal), 0, > + "Default value of per-interface flag for automatically adding an ip6 " > + "link-local address to interfaces when attached"); > +SYSCTL_VNET_STRUCT(_net_inet6_ip6, IPV6CTL_RIPV6STATS, rip6stats, > CTLFLAG_RW, > + &VNET_NAME(rip6stat), rip6stat, > + "RIP6 statistics"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_PREFER_TEMPADDR, prefer_tempaddr, > - CTLFLAG_RW, &VNET_NAME(ip6_prefer_tempaddr), 0, ""); > + CTLFLAG_RW, &VNET_NAME(ip6_prefer_tempaddr), 0, > + "Prefer the temporary address assigned when performing NUD"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_USE_DEFAULTZONE, use_defaultzone, > - CTLFLAG_RW, &VNET_NAME(ip6_use_defzone), 0,""); > + CTLFLAG_RW, &VNET_NAME(ip6_use_defzone), 0, > + "Use the default scope zone if not explicitly provided"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_MAXFRAGS, maxfrags, CTLFLAG_RW, > - &VNET_NAME(ip6_maxfrags), 0, ""); > + &VNET_NAME(ip6_maxfrags), 0, > + "Maximum number of fragments to hold in the reassembly queue"); > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_MCAST_PMTU, mcast_pmtu, CTLFLAG_RW, > - &VNET_NAME(ip6_mcast_pmtu), 0, ""); > + &VNET_NAME(ip6_mcast_pmtu), 0, > + "Enable multicast pMTU discovery"); > #ifdef IPSTEALTH > SYSCTL_VNET_INT(_net_inet6_ip6, IPV6CTL_STEALTH, stealth, CTLFLAG_RW, > - &VNET_NAME(ip6stealth), 0, ""); > + &VNET_NAME(ip6stealth), 0, > + "IPv6 stealth mode. No hop limit decrementation on forwarding"); > #endif > > #ifdef FLOWTABLE > @@ -600,29 +619,39 @@ > > /* net.inet6.icmp6 */ > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_REDIRACCEPT, rediraccept, > - CTLFLAG_RW, &VNET_NAME(icmp6_rediraccept), 0, ""); > -SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_REDIRTIMEOUT, redirtimeout, > - CTLFLAG_RW, &VNET_NAME(icmp6_redirtimeout), 0, ""); > + CTLFLAG_RW, &VNET_NAME(icmp6_rediraccept), 0, > + "Accept and process router redirects"); > SYSCTL_VNET_STRUCT(_net_inet6_icmp6, ICMPV6CTL_STATS, stats, CTLFLAG_RW, > - &VNET_NAME(icmp6stat), icmp6stat, ""); > + &VNET_NAME(icmp6stat), icmp6stat, > + "ICMPv6 statistics"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_PRUNE, nd6_prune, > CTLFLAG_RW, > - &VNET_NAME(nd6_prune), 0, ""); > + &VNET_NAME(nd6_prune), 0, > + "Period (in secs) for checking for stale router entries via nd6"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_DELAY, nd6_delay, > CTLFLAG_RW, > - &VNET_NAME(nd6_delay), 0, ""); > + &VNET_NAME(nd6_delay), 0, > + "Delay (in secs) before performing NUD on stale nodes"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_UMAXTRIES, nd6_umaxtries, > - CTLFLAG_RW, &VNET_NAME(nd6_umaxtries), 0, ""); > + CTLFLAG_RW, &VNET_NAME(nd6_umaxtries), 0, > + "Maximum number of unicast queries to perform via nd6"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_MMAXTRIES, nd6_mmaxtries, > - CTLFLAG_RW, &VNET_NAME(nd6_mmaxtries), 0, ""); > + CTLFLAG_RW, &VNET_NAME(nd6_mmaxtries), 0, > + "Maximum number of multicast queries to perform via nd6"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_USELOOPBACK, > nd6_useloopback, > - CTLFLAG_RW, &VNET_NAME(nd6_useloopback), 0, ""); > + CTLFLAG_RW, &VNET_NAME(nd6_useloopback), 0, > + "Use loopback interface for local traffic"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_NODEINFO, nodeinfo, CTLFLAG_RW, > - &VNET_NAME(icmp6_nodeinfo), 0, ""); > + &VNET_NAME(icmp6_nodeinfo), 0, > + "Node information state"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ERRPPSLIMIT, errppslimit, > - CTLFLAG_RW, &VNET_NAME(icmp6errppslim), 0, ""); > + CTLFLAG_RW, &VNET_NAME(icmp6errppslim), 0, > + "Packets per second limit for ICMPv6 queries"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_MAXNUDHINT, nd6_maxnudhint, > - CTLFLAG_RW, &VNET_NAME(nd6_maxnudhint), 0, ""); > + CTLFLAG_RW, &VNET_NAME(nd6_maxnudhint), 0, > + "Maximum number of upper layer hints"); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_DEBUG, nd6_debug, > CTLFLAG_RW, > - &VNET_NAME(nd6_debug), 0, ""); > + &VNET_NAME(nd6_debug), 0, > + ""); > SYSCTL_VNET_INT(_net_inet6_icmp6, ICMPV6CTL_ND6_ONLINKNSRFC4861, > - nd6_onlink_ns_rfc4861, CTLFLAG_RW, &VNET_NAME(nd6_onlink_ns_rfc4861), > - 0, "Accept 'on-link' nd6 NS in compliance with RFC 4861."); > + nd6_onlink_ns_rfc4861, > + CTLFLAG_RW, &VNET_NAME(nd6_onlink_ns_rfc4861), 0, > + "Accept 'on-link' nd6 NS in compliance with RFC 4861"); Wrong To: address >_>. -Garrett
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1211302222200.57210>