Date: Wed, 26 Nov 2003 21:22:52 -0300 From: Diabolo <diabolo@fibertel.com.ar> To: freebsd-gnome@FreeBSD.org Subject: gnome frezee Message-ID: <1069892572.1645.6.camel@nocbuc>
next in thread | raw e-mail | index | archive | help
--=-og1LGh0V4Oyxn/1wxsYm
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Hi guys, when i tryed to logout from gnome-panel all the gnome frezee
and i have to kill all with ctrl+alt+backspace to return the shell and
give me this error:
application 'gnome-session' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
xinit: connection to X server lost.
waiting for X server to shut down X connection to :0.0 broken (explicit
kill or
server shutdown).
Window manager warning: Lost connection to the display ':0.0';
most likely the X server was shut down or you killed/destroyed
the window manager.
The application 'gnome-panel' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
The application 'nautilus' lost its connection to the display :0.0;
most likely the X server was shut down or you killed/destroyed
the application.
Regards.
--=-og1LGh0V4Oyxn/1wxsYm
Content-Disposition: attachment; filename=dmesg.boot
Content-Type: text/plain; name=dmesg.boot; charset=
Content-Transfer-Encoding: 7bit
ail.cf Wed Nov 26 20:36:26 2003
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 14
done
Uptime: 6m1s
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #0: Wed Nov 26 20:28:13 ART 2003
root@hellgate.inferno:/usr/obj/usr/src/sys/HELLKERN
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(TM) XP 2200+ (1800.07-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536854528 (524272K bytes)
avail memory = 516583424 (504476K bytes)
Preloaded elf kernel "kernel" at 0xc059f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1bf0
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b099)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 11
pci0: <unknown card> (vendor=0x14e4, dev=0x4401) at 9.0 irq 12
ahc0: <Adaptec 2902/04/10/15/20C/30C SCSI adapter> port 0xd800-0xd8ff mem 0xed000000-0xed000fff irq 11 at device 10.0 on pci0
aic7850: Single Channel A, SCSI Id=7, 3/253 SCBs
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xec800000-0xec80007f irq 10 at device 14.0 on pci0
xl0: Ethernet address: 00:10:5a:a0:db:db
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl1: <3Com 3c905C-TX Fast Etherlink XL> port 0xd000-0xd07f mem 0xec000000-0xec00007f irq 12 at device 15.0 on pci0
xl1: Ethernet address: 00:01:02:c2:91:16
miibus1: <MII bus> on xl1
xlphy1: <3c905C 10/100 internal PHY> on miibus1
xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 5 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 5 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 5 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.3 irq 5
isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 ATA133 controller> port 0xa800-0xa80f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <VIA VT8235> port 0xe000-0xe0ff irq 9 at device 17.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xd0000-0xd07ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, unlimited logging
ad0: 29333MB <WDC WD307AA-00BAA0> [59598/16/63] at ata0-master UDMA66
ad1: 9541MB <QUANTUM FIREBALLlct10 10> [19386/16/63] at ata0-slave UDMA66
acd0: CDROM <ASUS CD-S500/A> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s1a
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <MATSHITA CD-R CW-7503 1.08> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
--=-og1LGh0V4Oyxn/1wxsYm
Content-Disposition: attachment; filename=ps.txt
Content-Type: text/plain; name=ps.txt; charset=
Content-Transfer-Encoding: 7bit
PID TT STAT TIME COMMAND
0 ?? DLs 0:00.00 (swapper)
1 ?? ILs 0:00.00 /sbin/init --
2 ?? DL 0:00.00 (taskqueue)
3 ?? DL 0:00.00 (pagedaemon)
4 ?? DL 0:00.00 (vmdaemon)
5 ?? DL 0:00.02 (bufdaemon)
6 ?? DL 0:00.01 (vnlru)
7 ?? DL 0:00.21 (syncer)
28 ?? Is 0:00.00 adjkerntz -i
73 ?? Is 0:00.00 /sbin/dhclient xl0
88 ?? Ss 0:00.20 /sbin/natd -n xl0
104 ?? Ss 0:00.14 /usr/sbin/syslogd -ss
112 ?? Is 0:00.01 /usr/sbin/cron
114 ?? Is 0:00.01 /usr/sbin/sshd
142 ?? Is 0:00.09 moused -p /dev/cuaa0 -t intellimouse
827 ?? I 0:00.02 sshd: diabolo [priv] (sshd)
830 ?? I 0:00.01 sshd: diabolo@ttyp0 (sshd)
964 ?? S 0:01.19 /usr/X11R6/bin/XFree86 :0 -nolisten tcp
974 ?? Is 0:00.15 /usr/local/libexec/bonobo-activation-server --ac-acti
976 ?? Is 0:00.05 gnome-smproxy --sm-client-id default0
978 ?? I 0:00.19 gnome-settings-daemon --oaf-activate-iid=OAFIID:GNOME
989 ?? S 0:00.09 xscreensaver -nosplash
996 ?? Is 0:00.12 /usr/X11R6/bin/metacity --sm-client-id=default1
1004 ?? Is 0:00.62 gnome-panel --sm-client-id default2
1006 ?? Ss 0:00.72 nautilus --no-default-window --sm-client-id default3
1008 ?? I 0:00.22 /usr/X11R6/libexec/wnck-applet --oaf-activate-iid=OAF
1010 ?? S 0:00.01 /usr/X11R6/libexec/mapping-daemon
1012 ?? S 0:00.16 /usr/X11R6/libexec/mixer_applet2 --oaf-activate-iid=O
831 p0 Is+ 0:00.01 -csh (csh)
158 v0 Is+ 0:00.00 /usr/libexec/getty Pc ttyv0
159 v1 Is 0:00.02 login [pam] (login)
178 v1 I 0:00.02 -csh (csh)
949 v1 I+ 0:00.00 /bin/sh /usr/X11R6/bin/startx
963 v1 I+ 0:00.00 xinit /home/diabolo/.xinitrc -- -nolisten tcp
969 v1 I 0:00.38 gnome-session
971 v1 S 0:00.60 /usr/X11R6/libexec/gconfd-2 7
160 v2 Is 0:00.01 login [pam] (login)
214 v2 S 0:00.02 -csh (csh)
1013 v2 R+ 0:00.00 ps ax
161 v3 Is+ 0:00.00 /usr/libexec/getty Pc ttyv3
162 v4 Is+ 0:00.00 /usr/libexec/getty Pc ttyv4
163 v5 Is+ 0:00.00 /usr/libexec/getty Pc ttyv5
164 v6 Is+ 0:00.00 /usr/libexec/getty Pc ttyv6
165 v7 Is+ 0:00.00 /usr/libexec/getty Pc ttyv7
--=-og1LGh0V4Oyxn/1wxsYm--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1069892572.1645.6.camel>