Date: Sat, 12 Jan 2002 11:29:56 -0500 From: "Joe & Fhe Barbish" <barbish@a1poweruser.com> To: <eegold@operamail.com> Cc: "FBSD Questions" <questions@FreeBSD.ORG> Subject: RE: what does my dmesg say? Message-ID: <LPBBIGIAAKKEOEJOLEGOIEEDCMAA.barbish@a1poweruser.com> In-Reply-To: <0d7213936040c12FE4@mail4.nc.rr.com>
next in thread | previous in thread | raw e-mail | index | archive | help
To start with, WinModems do not work in FBSD.
A FBSD internal modem must have a onboard controller and dsp.
There kinds of modems cost around $70.00 to $100.00.
I found that to get a internal modem found in FBSD you have to
change sio0 to be disabled like sio3 and then comment out the
sio1, sio2, and sio3 in the kernel source and recompile.
Must leave sio0 in as it is used to spawn the sio1-3
for your internal modems.
You also must disable com1 - com4 in the PC's bios.
My boot looks like this. The ******* are comments I added for this email.
********Sound card pci slot 1 ************
found-> vendor=0x1274, dev=0x5000, revid=0x01
class=04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000d800, size 6
******** zoom modem pci slot 2 *************
found-> vendor=0x11c1, dev=0x0480, revid=0x00
class=07-03-03, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base e3001000, size 8
map[14]: type 1, range 32, base 0000dc00, size 8
map[18]: type 1, range 32, base 0000e000, size 8
map[1c]: type 1, range 32, base 0000e400, size 3
********** Nic card pci slot 3 ****************
found-> vendor=0x10b7, dev=0x9800, revid=0x30
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=4
map[10]: type 1, range 32, base 0000e800, size 7
map[14]: type 1, range 32, base e3000000, size 7
*********** USR modem pci slot 4 ***************found-> vendor=0x12b9,
dev=0x1008, revid=0x01
class=07-00-02, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 0000ec00, size 3
snip
********Sound card pci slot 1 ************
pci0: <unknown card> (vendor=0x1274, dev=0x5000) at 17.0 irq 10
******** zoom modem pci slot 2 *************
sio0: irq maps: 0x3 0xb 0x3 0x3
sio0: <ActionTec 56k FAX PCI Modem> port
0xe400-0xe407,0xe000-0xe0ff,0xdc00-0xdcff mem 0xe3001000-0xe30010ff irq 3 at
device 18.0 on pci0
sio0: moving to sio1
sio1: type 16550A
********** Nic card pci slot 3 ****************
xl0: <3Com 3c980 Fast Etherlink XL> port 0xe800-0xe87f mem
0xe3000000-0xe300007f irq 4 at device 19.0 on pci0
xl0: Ethernet address: 00:01:02:2f:c3:00
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
*********** USR modem pci slot 4 ***************
sio0: irq maps: 0x3 0x803 0x3 0x3
sio0: <3COM PCI FaxModem> port 0xec00-0xec07 irq 11 at device 20.0 on pci0
sio0: moving to sio2
sio2: type 16550A
sio0: not probed (disabled)
-----Original Message-----
From: owner-freebsd-questions@FreeBSD.ORG
[mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Brian
T.Schellenberger
Sent: Friday, January 11, 2002 11:36 PM
To: leegold; freebsd-questions@FreeBSD.ORG
Subject: Re: what does my dmesg say?
On Friday 11 January 2002 11:01 pm, leegold wrote:
> Below is a copy of my dmesg.
> It's from an ibm aptiva that I
> pulled all the stock cards out of and put
> an isa hardware modem into.
>
> First could you comment on the modem, is
> it detected? I think I see something going on
> sio (?)
If the modem were detected, it would say "modem" in there someplace in my
experience so I'd say no.
It lists the devices as it finds them.
>
> Could you comment/interpet it in general?
> Any problem areas?
> The machine seems to run smoothly w/the freebsd 4.4
> I have on it. Thanks.
>
>
> Copyright (c) 1992-2001 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 4.4-RELEASE #0: Tue Sep 18 11:57:08 PDT 2001
> murray@builder.FreeBSD.org:/usr/src/sys/compile/GENERIC
> Timecounter "i8254" frequency 1193182 Hz
> CPU: Pentium/P54C (199.43-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x52c Stepping = 12
> Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> real memory = 50331648 (49152K bytes)
> avail memory = 44437504 (43396K bytes)
> Preloaded elf kernel "kernel" at 0xc0480000.
> Intel Pentium detected, installing workaround for F00F bug
> md0: Malloc disk
memory file system
> npx0: <math processor> on motherboard
Duh!
> npx0: INT 16 interface
Dunno.
> pcib0: <Host to PCI bridge> on motherboard
Duh!
> pci0: <PCI bus> on pcib0
Duh!
> isab0: <Intel 82371SB PCI to ISA bridge> at device 8.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX3 ATA controller> port 0xfe80-0xfe8f at device 8.1 on
Duh, duh, and duh!
> pci0 ata0: at 0x1f0 irq 14 on atapci0
ata0 is a disk drive running on the pci bus it has Interrupt (irq) 14 and
the
control address is at 0x1f0.
This should give some idea.
> ata1: at 0x170 irq 15 on atapci0
> pci0: <ATI Mach64-GT graphics accelerator> at 19.0
> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: model IntelliMouse, device ID 3
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> ppc0: cannot reserve I/O port range
> ata1-slave: ata_command: timeout waiting for intr
> ata1-slave: identify failed
> ad0: 4120MB <Maxtor 84320D4> [8930/15/63] at ata0-master WDMA2
> acd0: CDROM <CRD-8400B> at ata1-master using PIO4
> Mounting root from ufs:/dev/ad0s1a
> .............snip...
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-questions" in the body of the message
--
Brian T. Schellenberger . . . . . . . bts@wnt.sas.com (work)
Brian, the man from Babble-On . . . . bts@babbleon.org (personal)
http://www.babbleon.org
-------> Free Dmitry Sklyarov! (let him go home) <-----------
http://www.eff.org http://www.programming-freedom.org
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?LPBBIGIAAKKEOEJOLEGOIEEDCMAA.barbish>