Date: Thu, 18 May 2000 11:33:23 -0400 (EDT) From: wietse@porcupine.org (Wietse Venema) To: freebsd-mobile@freebsd.org Cc: freebsd-scsi@freebsd.org Subject: Re: Need FreeBSD 4.0 removable SCSI support Message-ID: <20000518153323.C01FC4563D@spike.porcupine.org> In-Reply-To: <20000518170300.A6979@lpthe.jussieu.fr> from Michel Talon at "May 18, 0 05:03:00 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
Summary: I'm stuck at FreeBSD 2.2.8 because removable SCSI devices are not supported in FreeBSD 3.4. Meanwhile, I need up-to-date Linux emulation for Star Office, which does not run on FreeBSD 2.2.8. At the suggestion of several respondents I installed FreeBSD 4.0-STABLE on my Thinkpad 600. I downloaded 4.0-20000518-STABLE and installed the bin/* files including pre-compiled kernel. I use IRQ 3+9 for pccard devices which works fine with the removable modem and ethernet cards. See dmesg messages below. When I insert the Adaptec 1460B SCSI controller, the machine locks up after "camcontrol rescan 0", exactly like it did with FreeBSD 4.0-RELEASE yesterday. On the other hand, SUSE Linux recognizes the controller and the attached JAZ disk even before it has installed Linux. Star Office runs on Linux, and I can use VMware to run Crap if I need to. I can no longer afford to be stuck on FreeBSD 2.2.8. My best bet is to migrate to 3.4 for just one month without SCSI, and then kiss FreeBSD goodbye forever. Too bad, I liked running a real operating system. Wietse Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 4.0-20000518-STABLE #0: Thu May 18 11:32:01 GMT 2000 root@usw3.freebsd.org:/usr/src/sys/compile/GENERIC Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134021120 (130880K bytes) avail memory = 126484480 (123520K bytes) Preloaded elf kernel "kernel" at 0xc03c9000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard pci0: <PCI bus> on pcib0 pcic-pci0: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0 pcic-pci1: <TI PCI-1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0 pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 3.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11 chip1: <Intel 82371AB Power management controller> port 0xefa0-0xefaf at device 7.3 on pci0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> on isa0 sc0: VGA <16 virtual consoles, flags=0x200> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: cannot reserve I/O port range isa_compat: didn't get irq for lnc ad0: 6149MB <IBM-DBCA-206480> [13328/15/63] at ata0-master using UDMA33 acd0: CDROM <TOSHIBA CD-ROM XM-1702BC> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted pccard: card inserted, slot 0 pccard: card inserted, slot 1 aic1: <Adaptec 6260/6360 SCSI controller> at port 0x340-0x35f irq 3 slot 0 on pccard0 aic1: aic6360, dma, disconnection, parity check ed1 at port 0x240-0x25f iomem 0xd4000-0xd7fff irq 9 slot 1 on pccard1 ed1: supplying EUI64: 00:04:ac:ff:fe:25:da:dd ed1: address 00:04:ac:25:da:dd, type NE2000 (16 bit) ed1: starting DAD for fe80:000a::0204:acff:fe25:dadd ed1: DAD complete for fe80:000a::0204:acff:fe25:dadd - no duplicates found (probe0:aic1:0:0:0): ccb 0xc0b3c000 - timed out, phase 0xa6, state 1 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000518153323.C01FC4563D>