From owner-freebsd-current Sat Apr 19 17:21:32 1997 Return-Path: Received: (from root@localhost) by freefall.freebsd.org (8.8.5/8.8.5) id RAA24574 for current-outgoing; Sat, 19 Apr 1997 17:21:32 -0700 (PDT) Received: from lamb.sas.com (uucp@lamb.sas.com [192.35.83.8]) by freefall.freebsd.org (8.8.5/8.8.5) with SMTP id RAA24569 for ; Sat, 19 Apr 1997 17:21:29 -0700 (PDT) Received: from mozart by lamb.sas.com (5.65c/SAS/Gateway/01-23-95) id AA09895; Sat, 19 Apr 1997 20:21:28 -0400 Received: from iluvatar.unx.sas.com by mozart (5.65c/SAS/Domains/5-6-90) id AA21280; Sat, 19 Apr 1997 20:21:07 -0400 Received: by iluvatar.unx.sas.com (5.65c/SAS/Generic 9.01/3-26-93) id AA27197; Sat, 19 Apr 1997 20:21:06 -0400 From: "John W. DeBoskey" Message-Id: <199704200021.AA27197@iluvatar.unx.sas.com> Subject: Install locks on HP Vectra XU To: current@freefall.freebsd.org Date: Sat, 19 Apr 1997 20:21:05 -0400 (EDT) X-Mailer: ELM [version 2.4 PL23] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-current@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk Hello, I've attempted to install from both the 2.2.1-RELEASE and 3.0-CURRENT boot floppies. The boot process locks up with the cursor in the lower left corner of the screen just before the 1st screen would appear. A boot floppy from 2.1.5 seems to work. The machine is an HP Vectra XU Pentium @ 133Mhz, 96Meg. Since all the components required to boot the machine are available via the pci bus, I've disabled all the drivers that are not needed, but this has no effect. If anyone has any clues, I'd really appreciate it. Thanks, John -- jwd@unx.sas.com (w) John W. De Boskey (919) 677-8000 x6915