Date: Mon, 29 Mar 2004 21:19:53 +0200 (MEST) From: Markku Kokko <maxi@algonet.se> To: hardware@freebsd.org Subject: CardBus card activation failed Message-ID: <Pine.SOL.4.10.10403292113020.14945-100000@kairos.algonet.se>
next in thread | raw e-mail | index | archive | help
Hi I have a Dell Inspiron 8500 running FreeBSD 5.2.1 Release. I have a D-Link 650+ card that I wish to use. I got it working, sort of. i am not sure of what information you need, but here is the debugging info I could get and also the dmesg. Please let me know if you need more info. Also please CC me as I am not in the list. If I boot without the card and insert when the machine is up and running I get this error: (this also occurs if I have the card inserted at boot) CBB EVENT 0x6 Waking up thread Status is 0x30000820 cbb0: card inserted: event=0x00000000, state=30000820 cbb0: cbb_power: 3V cbb0: cbb_power: 0V cbb0: CardBus card activation failed Then I take out the card and insert it back in again and it works: CBB EVENT 0x2 Waking up thread CBB EVENT 0x4 Waking up thread Status is 0x30000086 CBB EVENT 0x6 Waking up thread Status is 0x30000820 cbb0: card inserted: event=0x00000000, state=30000820 cbb0: cbb_power: 3V TUPLE: LINKTARGET [3]: 43 49 53 Manufacturer ID: 97000284 TUPLE: Unknown(0x04) [6]: 03 01 32 00 00 00 cardbus0: Opening BAR: type=MEM, bar=14, len=1000 CIS reading done cardbus0: Resource not specified in CIS: id=10, size=20 cardbus0: Resource not specified in CIS: id=18, size=10000 cardbus0: Non-prefetchable memory at f6010000-f6020fff cardbus0: IO port at 1000-101f acx0: <Texas Instruments (TI) 802.11b+ 22Mbps Wireless Adapter> port 0x1000-0x10 1f mem 0xf6010000-0xf601ffff,0xf6020000-0xf6020fff irq 11 at device 0.0 on cardb us0 acx0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 22Mbps acx0: 802.11 address: 00:80:c8:18:89:a8 acx0: Eeprom Rev 5 Domain ETSI Europe (1-13), Firmware Rev 1.9.8.b acx0: Radio Type 0x0d, Antenna 0x8d, CCA Mode 0x0d, ED Threshold 0x70 acx0: (c) http://wlan.kewl.org/ 2003 Here is the dmesg from the machine: > dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Thu Mar 18 21:11:24 CET 2004 root@bsd.bredbandsbolaget.se:/usr/src/sys/i386/compile/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c8a000. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0c8a1cc. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c8a278. Preloaded elf module "/boot/kernel/if_acx.ko" at 0xc0c8a324. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c8a3d0. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz (2392.95-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> real memory = 536543232 (511 MB) avail memory = 507310080 (483 MB) Pentium Pro MTRR support enabled npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00fc590 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 29 INTA is routed to irq 11 pcib0: slot 29 INTB is routed to irq 11 pcib0: slot 29 INTC is routed to irq 11 pcib0: slot 29 INTD is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 pcib0: slot 31 INTB is routed to irq 11 agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 nvidia0: <GeForce4 4200 Go> mem 0xf0000000-0xf3ffffff,0xfc000000-0xfcffffff irq 11 at device 0.0 on pci1 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/13.00, addr 2, iclass 3/1 ums0: 4 buttons and Z dir. uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib2: slot 1 INTA is routed to irq 11 cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci2 cbb0: PCI Memory allocated: f6000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: slot 1 INTA is routed to irq 11 cbb0: [MPSAFE] fwohci0: vendor=104c, dev=8029 fwohci0: <1394 Open Host Controller Interface> mem 0xfaff8000-0xfaffbfff,0xfafff800-0xfaffffff irq 11 at device 1.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 47:4f:c0:00:34:02:5c:10 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 46:4f:c0:02:5c:10 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xbfa0-0xbfaf,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pc ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 3 pcm0: <SigmaTel STAC9750/51 AC97 Codec> pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x300-0x307,0x2e8-0x2ef irq 3 drq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0 pmtimer0 on isa0 fdc0: ready for input in output fdc0: cmd 3 failed at out byte 1 of 3 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2392953704 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% Status is 0x30000006 GEOM: create disk ad0 dp=0xc4dc9060 ad0: 57231MB <FUJITSU MHT2060AT> [116280/16/63] at ata0-master UDMA100 acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4240N> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.SOL.4.10.10403292113020.14945-100000>